Search

Biofouling is one of the challenges that can strongly affect the finfish farm economy. Although several studies on biofouling in aquaculture have been conducted in the Mediterranean Sea, they focused on specific taxa or were limited to a particular period of sampling. The present study investigated for the first time the development, composition and variation in a biofouling community in a finfish farm with immersion time, season and depth. The results indicate that all these factors influence biofouling succession and recruitment. Moreover, the species that had a crucial role in structuring the community and in the farm cleaning activities were the ascidian Styela plicata and the bivalve Mytilus galloprovincialis . Compared with the literature data, the results highlight the heterogeneity in the composition of the biofouling present in the Mediterranean Sea. Moreover, such knowledge of the biofouling community could provide important information about management efforts and the costs that farmers will face when siting new fish farms.

Polygodial is a potent and selective inhibitor of ascidian metamorphosis that shows promise for controlling fouling by ascidians in bivalve aquaculture. The current study examined the potency of, and associated effects of seawater exposure on, a rosin-based soluble-matrix paint laced with 0.08-160 ng polygodial g(-1) wet paint matrix. Paint-coated surfaces were soaked in seawater for 0, 2, 4 or 12 weeks prior to screening for antifouling activity using a bioassay based on the nuisance ascidian Ciona savignyi Herdman. Mortality was greater (mean 50% lethal concentration: 5 ± 2 ng g(-1); mean 75% lethal concentration: 17 ± 4 ng g(-1)) and metamorphosis was inhibited (mean 50% anti-metamorphic concentration: 2 ± 0.4 ng g(-1); mean 75% anti-metamorphic concentration: 15 ± 10 ng g(-1)) in C. savignyi larvae exposed to polygodial-laced soluble-matrix paints, relative to control paints without polygodial. Soaking in seawater prior to testing reduced the efficacy of the formulation up to nearly 12-fold, but even after soaking for 12 weeks paints laced with polygodial at 160 ng g(-1) wet paint matrix prevented ⩾90% of the larvae of C. savignyi from completing metamorphosis. The outcome of this experiment provides a positive first step in evaluating the suitability of polygodial-laced soluble-matrix paints for use in aquaculture.

Competitive interactions between cultured mussels and fouling organisms may result in growth and weight reductions in mussels, and compromised aquaculture productivity. Mussel ropes were inoculated with Ciona intestinalis, Ectopleura crocea or Styela clava, and growth parameters of fouled and unfouled Mytilus galloprovincialis were compared after two months. Small mussels (≈ 50 mm) fouled by C. intestinalis and E. crocea were 4.0 and 3.2% shorter in shell length and had 21 and 13% reduced flesh weight, respectively, compared to the controls. Large mussels (≈ 68 mm) fouled by S. clava, C. intestinalis and E. crocea were 4.4, 3.9 and 2.1% shorter than control mussels, respectively, but flesh weights were not significantly reduced. A series of competitive feeding experiments indicated that S. clava and C. intestinalis did not reduce mussels' food consumption, but that E. crocea, through interference competition, did. Fouling by these species at the densities used here reduced mussel growth and flesh weight, likely resulting in economic losses for the industry, and requires consideration when developing biofouling mitigation strategies.

Artificial structures associated with shipping and boating activities provide habitats for a diverse suite of non-indigenous marine species. Little is known about the proportion of invader success in nearby waters that is attributable to these structures. Areas close to piles, wharves and piers are likely to be exposed to increasing levels of propagule pressure, enhancing the recruitment of non-indigenous species. Recruitment of non-indigenous and native marine biofouling taxa were evaluated at different distances from a large commercial shipping pier. Since artificial structures also represent a desirable habitat for fish, how predation on marine invertebrates influences the establishment of non-indigenous and native species was also evaluated. The colonisation of several non-indigenous marine species declined rapidly with distance from the structure. Little evidence was found to suggest that predators have much influence on the colonisation success of marine sessile invertebrate species, non-indigenous or otherwise. It is suggested that propagule pressure, not predation, more strongly predicts establishment success in these biofouling assemblages.

Fouling by ascidians causes major stock losses and disrupts production in marine aquaculture, especially bivalve aquaculture. Currently, no cost effective solution exists despite the testing of many prospective control techniques. This study examined a range of allelochemicals suspected to inhibit metamorphosis in marine larvae. Five allelochemicals were screened in a larval metamorphosis bioassay using Ciona savignyi Herdman to determine their potential as a remedy for ascidian fouling in bivalve aquaculture. Three of the compounds tested inhibited ascidian larval metamorphosis and increased mortality at low concentrations. These were radicicol (99% inhibition of metamorphosis [IC₉₉], 0.8 μg ml⁻¹; 99% lethal concentration [LC₉₉], 2.5 μg ml⁻¹; 99% lethal time [LT₉₉], 7.0 days), polygodial (IC₉₉, 0.003 μg ml⁻¹; LC₉₉, 0.9 μg ml⁻¹; LT₉₉, 6.4 days), and ubiquinone-10 (IC₉₉, 3.2 μg cm⁻²; LC₉₉, 14.5 μg cm⁻²; LT₉₉, 5.6 days; expressed as μg cm⁻² due to insolubility in water and ethanol). While spermidine significantly affected metamorphosis and mortality of C. savignyi, the effect was insufficient to achieve inhibition in 99% of larvae over the 7-day timeframe of the assay. Muscimol did not affect metamorphosis or mortality at the concentrations tested. The present study demonstrates that radicicol, polygodial and ubiquinone-10 have potential for future development in antifoulant formulations targeted towards the inhibition of metamorphosis in ascidian larvae, while spermidine and muscimol appear unsuitable.

Material science provides a direct route to developing a new generation of non-toxic, surface effect-based antifouling technologies with applications ranging from biomedical science to marine transport. The surface topography of materials directly affects fouling resistance and fouling removal, the two key mechanisms for antifouling technologies. However, the field is hindered by the lack of quantified surface characteristics to guide the development of new antifouling materials. Using a biomimetic approach, key surface parameters are defined and quantified and correlated with fouling resistance and fouling removal from the shells of marine molluscs. Laser scanning confocal microscopy was used to acquire images for quantitative surface characterisation using three-dimensional surface parameters, and field assays correlated these with fouling resistance and fouling release. Principle component analysis produced a major component (explaining 54% of total variation between shell surfaces) that correlated with fouling resistance. The five surface parameters positively correlated to increased fouling resistance were, in order of importance, low fractal dimension, high skewness of both the roughness and waviness profiles, higher values of isotropy and lower values of mean surface roughness. The second component (accounting for 20% of variation between shells) positively correlated to fouling release, for which higher values of mean waviness almost exclusively dictated this relationship. This study provides quantified surface parameters to guide the development of new materials with surface properties that confer fouling resistance and release.

Although ascidians are conspicuous members of the fouling community not much is known regarding their recruitment patterns in coral reefs. A 1-year study was carried out along the Red Sea coast of Israel to examine the effects of season and spatial distribution on ascidian recruitment to artificial marine structures. In general, autumn and spring were characterized by higher coverage with a significantly higher percentage of cover of Didemnum granulatum in autumn and higher numbers of Herdmania momus in spring. These species contributed the most to similarity between treatments consequently setting the pattern for each group (colonial and solitary). Halocynthia spinosa had significantly higher numbers during winter and Phallusia nigra was absent in spring and winter. H. momus showed a preference for horizontal surfaces. P. nigra and Ascidia cannelata showed a preference for floating units. It is concluded that the ascidian recruitment patterns are species-specific and vary between seasons, orientation and position on the substrata and in the water column.