Search

Dhivya, Padma, and Santhini ([2]) states that wound dressing is designed to be in contact with the wound, which is different from a bandage that holds the dressing in place. Keywords: Chitosan; hemostatic efficacy; plain gauze; secondary layer; spunlace; wound dressing; ; ; ; ; ; EN Chitosan hemostatic efficacy plain gauze secondary layer spunlace wound dressing ZH 8044 8050 7 11/21/22 20221220 NES 221220 Introduction The selection of fibers and textile structures are very essential for the selection hemostatic wound dressing material (Kubera Sampath Kumar et al. [4]; [6]; [5]). 2020a. Study of wound dressing material coated with natural extracts of Calotropis Gigantean, Eucalyptus Globulus and buds of Syzygium Aromaticum solution enhanced with rhEGF (REGEN-D TM 60). 2017a. Evaluation of antibacterial efficacy and wound healing activity of natural fibre based wound dressing coated with natural extracts of calotropis gigantean, eucalyptus globules and buds of syzygiumaromaticum enhanced with epidermal growth factor. [Extracted from the article]

This study analyses the influence of modified yarn path on ring spinning like straight path, left diagonal path, and right diagonal path on the physical properties of the cotton fabrics like tensile strength, tear strength, and drape performance. The results show that the fabrics made with the left diagonal yarn path gives a better overall performance of the physical properties of the cotton fabrics followed by straight path and right diagonal yarn path. [ABSTRACT FROM AUTHOR]

After reviewing the past work into the characterization of weave structures and their relationships with various properties of fabrics, an account is given of the present knowledge of them on comfort properties which represents one of the major areas that have been neglected in garments. The shortcomings of this knowledge are shown to be that, although many studies have been conducted on comfort, there have been no systematic studies of weave structures and their impact on comfort. Thermal comfort properties of fabrics are affected by a gamut of fiber, yarn, and fabric properties. In this study, the characterization in the comfort properties, namely thermal resistance and thermal conductivity, has been studied as a function of weave structures and other geometrical properties. [ABSTRACT FROM AUTHOR]

The influence of air, oxygen and argon plasma treatment on the thermal comfort behavior of cotton woven fabric which is spun from modified yarn path in ring spinning has been investigated in this study. The cotton fabric samples were undergone different plasma treatment namely air, argon and oxygen. The fabric air permeability has tend to be decreased with the plasma treatment and the oxygen plasma-treated fabric has least air permeability. The untreated fabric shows higher air permeability followed by left diagonal yarn path, straight path and right diagonal yarn path. It was also observed thermal resistance and water vapor permeability of the fabric has increased with the plasma treatment and the oxygen plasma-treated fabric has higher thermal resistance and water vapor permeability. The untreated fabric shows lower thermal resistance and water vapor permeability followed by left diagonal yarn path, straight path and right diagonal yarn path. [ABSTRACT FROM AUTHOR]

This study conducted to understand the limitations of existing wound-dressing systems. A case study on healing performance of different types of commercially available wound dressings was conducted at Madras Medical College and Government General Hospital (MMC&GH), Chennai, Tamil Nadu, India (Ethical Clearance No. 3250/ME5/2010). The study indicated that the single-layer dressing would not satisfy most of the requirements of an ideal wound-dressing system, and hence there is the need for developing a multilayer wound-dressing system with each layer satisfying different requirements of an ideal wound-dressing system. [ABSTRACT FROM AUTHOR]

The fabric tear strength is an important parameter in textile material, ever since it is close to relate to the service of the fabric. Tear strength of the fabrics depends on the flexibility of the yarn in fabric structure. In this research, the tear strength of 11 cotton woven fabrics is analyzed based on the weave parameters such as crossing over firmness factor (CFF), Floating Yarn Factor (FYF), Fabric Firmness Factor (FFF) and weave factor (P1). [ABSTRACT FROM AUTHOR]

This work discusses the influence of process variables on antimicrobial properties of cotton single jersey knitted fabrics. The antimicrobial process variables are optimized based on the Box-Benken experimental design using design-expert software 8.0 to predict the optimum process parameter for achieving the required level of antimicrobial properties. The effects of process parameters such as yarn count, loop length, and finishing % of the zone of inhibition (ZOI) against the Escherichia coli and Staphylococcus aureus microbes on cotton knitted fabric have been carried out. Result shows that except yarn count other parameters are not significant toward the ZOI against microbes. [ABSTRACT FROM AUTHOR]

This study was aimed to develop knitted denim fabrics by using cotton and eri silk yarns. Three combinations of 3/1 twill knitted denim fabrics were developed. Two materials cotton yarn 30s and eri silk yarn 2/80s Nm with three types (100% cotton, 50% cotton/50% eri silk, 100% eri silk) of knitted denim fabrics were produced. Moisture management properties were tested for the developed samples.100% eri silk knitted denim fabric was found with the excellent accumulative one way transport index % and a very good overall moisture management capability better than that of 100% cotton and 50% cotton/50%eri silk knitted denim fabrics. The results indicated that the eri silk knitted denim fabric is more suitable for active wear and functional wear applications. [ABSTRACT FROM AUTHOR]

Thirty-six samples of woven fabric were finished with Musa acuminata SAP in three different concentrations, viz., 50%, 75%, and 100% were applied on cotton fabrics using padding mangle at four different temperatures, viz., room temperature, 50°C, 75°C, and 100°C and also with three different process timings, viz., 20 min, 40 min, and 60 min, respectively. The finished fabrics have been analyzed on the whiteness and yellow index properties. It has been observed that the fabric finished with a 50% concentration of Musa acuminata SAP with 50°C for a prolonged time of processing shows a lesser yellow index and higher whiteness index value followed by the 100% and 75% concentration of SAP. The finished optimized fabric samples have been evaluated on the physical properties of fabric such as tensile strength, tear strength, pilling, drape coefficient, and stiffness of the fabric. It has been found that the fabric finished with a 50% concentration of Musa acuminata SAP with the lowest temperature at least processing time has better performance in the physical properties of the fabric when compared to the highest concentration of Musa acuminata SAP with the highest temperature at highest process timing. [ABSTRACT FROM AUTHOR]

In this study, the methanol extract of Musa acuminate leaves has a significant development on the quality of the protection features such as, antibacterial and ultraviolet protection, was observed. The fabric finished with a higher concentration of M. acuminata sap (7%) at the temperature rate of 40–50°C has higher zone of inhibition against gram-positive bacteria and improved ultraviolet protection factor than the controlled sample. The fabric finished with the lower concentration of M. acuminata sap (3% & 5%) has lesser zone of inhibition against gram-positive bacteria. The fabric finished with a 7% concentration of M. acuminata leaves methanol extract at 40–50°C shows high protection factor against antibacterial and ultraviolet protection. Hence, it is observed that the fabric finished with a higher concentration of M. acuminata sap exhibits a higher zone of inhibition against bacteria's and ultraviolet protection factors when compared to the lower concentration of methanol extraction of M. acuminata leaves. [ABSTRACT FROM AUTHOR]

Effect of Musa acuminata SAP on the air permeability of the finished cotton fabric Water vapor permeability The influence of I Musa acuminata i SAP on the water vapor permeability of the finished specimen is described in Figure 3. Keywords: Cotton fabrics; comfort; Musa acuminata; natural extracts; thermal comfort; SAP; ; ; ; EN Cotton fabrics comfort Musa acuminata natural extracts thermal comfort SAP ZH 8092 8100 9 11/21/22 20221220 NES 221220 Introduction I Musa Acuminata i stem SAP is naturally extracted by cutting the cultivated plant just 1 ½ feet above from the ground level where the SAP (Separate substance Present) flow is relatively uniform and making a pit over it, helps to exude the sap due to the higher root pressure. Two-way ANOVA was utilized to identify the significance of differences between finished and controlled fabric samples and fabric physical properties, thermal comfort properties of woven finished fabric samples. [Extracted from the article]

The article focuses on finding the relation between the yarn twist and ratio of blend on the properties of polyester, cotton, bamboo related to yarn and mentions the production of yarns along with its tenacity.

The ability to transport and evaporate moisture quickly and effectively is a very essential and expected property of a fabric chosen for the clothing purposes. The present study analyzed the moisture management properties of four different natural and manmade cellulosic fibers, its blends and by varying three different knitted structures using moisture management tester. The result reveals that the modal fiber wicks and spreads quickly and it requires an average 50% lesser time than other fiber samples. Among the three structures, single jersey fabrics showed excellent behavior of transportation of moisture through its surface. Single jersey modal fabric was rated as superior moisture management fabric, which can be recommended for the applications such as sportswear, where high moisture management properties with greater comfort are demanded. [ABSTRACT FROM AUTHOR]

Musa Acuminata SAP has greater influence on moisture management property of the fabric. The fabric finished with Musa Acuminata SAP also shows higher level of comfort. An examination was made on the effect of Musa Acuminata SAP-finished fabric on moisture management properties of the cotton-finished fabric like wetting time, absorption time, spreading area, spreading speed, accumulative one-way transport index, and moisture management capability. The results prove that the fabric finished with the highest concentration of Musa Acuminata SAP at a moderate temperature with the least processing time has good performance in the moisture management behavior of the finished fabric when compared with the lower concentration of Musa Acuminata SAP with the highest temperature at the highest processing time. [ABSTRACT FROM AUTHOR]

In this study, 100% Eri Silk, 85:15% Wool/Eri silk, Cotton, and Micro-denier Acrylic yarns have been used to develop double-layered knitted fabrics. The thermal comfort properties such as air permeability, thermal resistance, thermal conductivity, and water vapor transmission have been evaluated. In this study, it is found that 100% eri silk double-layered knitted fabrics have better air permeability properties when compared with the other fabrics (85:15% Wool/Eri silk and 100% micro-denier acrylic fabrics) due to their thin and porous structure. As far as thermal conductivity is concerned, 100% Eri silk double-layered knitted fabrics have better thermal conductivity, whereas 85:15% wool/Eri silk double-layered knitted fabrics show poor thermal conductivity. In the case of thermal resistance, 85:15% wool/Eri silk double-layered knitted fabrics have maximum thermal resistance and 100% Eri silk shows poor thermal resistance when compared to other samples. A total of 100% Eri silk double-layered knitted fabrics have better water vapor transmission and 85:15% wool/Eri silk double-layered knitted fabrics have poor water vapor transmission when compared to other samples. [ABSTRACT FROM AUTHOR]

Menstrual hygiene is one of the most important health-related aspects which must be given higher priority to overcome the menstrual cycle period of women. Currently, there are many types of sanitary napkins are available in the market to absorb the menstrual fluid but most of them are constructed by using petroleum bi-product called SAP and it is used to absorb and hold more menstrual fluid. The present work focuses on to produce and study the moisture behavior properties of a sanitary napkin by using 100% natural fibers as core absorbent. Milkweed fibers are the natural organic fibers which have been taken as core absorbent material in different blend ratios as 100% milkweed, 80/20 milkweed/cotton, 60/40 milkweed/cotton, 50/50 milkweed/cotton, 40/60 milkweed/cotton, and 20/80 milkweed/cotton to develop a sanitary napkin by using polyethylene and polypropylene as bottom and top layer respectively. The produced samples were tested and evaluated by Liquid spreading rate test, Liquid Retention test, Liquid holding capacity under pressure test, and quantity of liquid absorbed in order to evaluate the moisture behavior properties of developed sanitary napkin. The outcome of the results demonstrates that sanitary napkins shows enhanced moisture properties when increasing the milkweed fiber blend percentage. [ABSTRACT FROM AUTHOR]