Search

In this article, the quality changes of the granular fruits and vegetables dried by vacuum microwave drying, freeze drying, hot air drying, and combined hot air–vacuum microwave drying are investigated, and the quality parameters compared on the basis of vitamin C and chlorophyll contents, shrinkage and rehydration capacity, color, texture, and microstructure changes. The quality parameters of products dried by vacuum microwave drying are slightly lower than those obtained by freeze drying, but much better than those obtained using conventional hot air drying. The quality characteristics of product dried by combined hot air–vacuum microwave are significantly improved compared to those simply hot air–dried. [ABSTRACT FROM AUTHOR]

Wild cabbage was dehydrated by a combination of hot-air drying and microwave vacuum drying. It showed that the total drying time was reduced by about half while the retention values of the nutrient components and chlorophyll were improved significantly. Microwave/vacuum-dried products had a more porous texture. Finally, microwave drying showed effective bactericidal action in the product with acceptable quality of dried product. [ABSTRACT FROM AUTHOR]

Dielectric properties of sliced Agaricus bisporus samples, with 0.16-0.89 [g/g, wet basis (w.b.)] moisture content, were determined using a network analyser and an open-ended coaxial-line probe, over a frequency range of 915 MHz to 2450 MHz and a temperature range of 25°C to 60°C. The results showed that the permittivity of A. bisporus was a function of frequency, moisture content, and temperature. The dielectric constant and loss factor were directly proportional to moisture content and temperature, respectively, and both decreased with increasing frequency. However, the influence of temperature on the dielectric constant showed a different trend, as this was affected by the moisture content of the sample. The dielectric loss factor initially increased and then decreased with the decrease in moisture content. Both inflection points appeared at the moisture content value of 0.69 (g/g, w.b.), which represents the "semi-bound water transfer" point. Third-degree polynomial models could be used to describe dielectric constant and loss factor values as functions of moisture content and temperature. The penetration depth decreased with increasing frequency and temperature; however, this first decreased with decreasing moisture content and then increased. Notably, the penetration depth was at a low ebb when the moisture content ranged from 0.69 to 0.52 (g/g, w.b.), indicating easier uneven drying. Low frequency (915 MHz) with large penetration depth represents a highly effective method for large-scale industrial dielectric microwave drying of A. bisporus slices from the angle of uniformity. [ABSTRACT FROM AUTHOR]