Search

Detection of amino acid (AA) is an essential step to understand various biological processes. In this study, we used innovative optical birefringent patterns of nematic liquid crystals (LCs) for the detection of several AAs. We attempted to use capillary-confined nematic LCs as sensor for AA analysis because their three-dimensional micro-scale architecture of LCs allowed better performance than that of mainly reported LC thin film sensors owing to the effect on the formation and dynamics of point defect. The sensing system was built by disrupting the alignment of a nematic LC, 4-cyano-4′-pentylbiphenyl (5CB), using the dopant of dodecyl aldehyde. Detection principle is based on the chemical analytical method of aldehyde titration for AAs, wherein the reaction between AAs and aldehyde group generates Schiff bases that could alter the configuration of nematic LCs at the aqueous/LC interface. The patterns generated in the reaction are captured by polarising optical microscopy (POM) and are visible to the naked eye. The functionalised LCs detected glycine at concentrations as low as 1 pM. There was a surprising result that it can selectively detect D-AAs against their L-isomers, however, further efforts are required to explain the mechanism. [ABSTRACT FROM AUTHOR]

The proposed work discusses different parameters which are considered to improve the performance of a tin oxide-based thin film gas sensor. This includes analysing and deducing suitable catalytic additives to enhance the performance of the sensor in terms of selectivity and sensitivity. Chemical sensitization and electronic sensitization are performed to improve the rate of response of the sensor. [ABSTRACT FROM PUBLISHER]

This study reports the synthesis, characterization and gas sensing applications of N-cyclohexylmethacrylamide (NCMA) monomer material using FT-IR,1H and13C NMR, UV-visible spectroscopy, Quartz Crystal Microbalance (QCM) and Langmuir-Blodgett (LB) thin film deposition techniques. The thin film deposition conditions of NCMA monomer material, which are prepared by LB film technique, are characterized by UV-visible spectroscopy and QCM system. The sensing behaviors of the LB film with respect to volatile organic compounds (VOCs) at room temperature are investigated. Surface pressure change as a function of surface area of NCMA molecule at the water surface shows a well-organized and stable monolayer at 18 mN m−1surface pressure value for LB film deposition. Transfer ratio values are found to be ≥ 0.94 for quartz glass and ≥ 0.93 for quartz crystal substrate. The typical frequency shift per layer is obtained 20.10 Hz/layer and the deposited mass onto a quartz crystal is calculated as 824.62 ng/layer. The sensing responses of the LB films against chloroform, dichloromethane, acetone, toluene, benzene and ethanol are measured by QCM system. The sensitivities of the NCMA LB film sensor are determined between 0.085 and 0.029 Hz ppm−1. Sensitivities with detection limits are between 35.29 and 100.33 ppm against organic vapors. These results can be concluded that the monomer LB film sample is found to be significantly more sensitive to chloroform and dichloromethane vapors than others organic vapors used in this work. This material may find potential applications in the development of room temperature organic vapor sensing. [ABSTRACT FROM AUTHOR]