Search

Floor heave is a disaster that is frequently encountered in tunnel engineering. Existing explanations of floor heave mechanisms have many limitations, and the most important of which is that the stress concentration, release and transfer phenomena and the influences of the in-situ stress lateral coefficient and tensile strength are ignored. Therefore, the combined finite-discrete element method (FDEM) is used to study the failure process of floor rock masses and propose a new mechanical mechanism of floor heave that can consider the influences of the in-situ stress lateral coefficient and tensile strength. The type I fracture energy corresponding to different tensile strengths is calibrated using a direct tensile simulation test. Then, the floor heave mechanism is investigated under different lateral coefficients and tensile strengths, and five different floor heave modes are proposed under different in-situ stress lateral coefficients and tensile strengths. The floor heave modes controlled by the various in-situ stress lateral coefficients and tensile strengths are different, but they can all be explained by the maximum concentrated tangential stress. [ABSTRACT FROM AUTHOR]

To investigate the effects of the oval hole on the strength and the failure mechanisms of rock materials, a series of uniaxial and biaxial compression numerical simulations were carried out using the combined finite-discrete element method (FDEM). Based on the numerical simulation results, the effects of dip angle (β), major–minor ratio (ω) and position of the oval hole on rock strength characteristics crack initiation and development process and final failure modes were analysed in detail. The numerical simulation results indicate that: (1) Under uniaxial compression, the ultimate failure modes of rock containing oval holes can be mainly classified into single inclined plane shear failure, X-shaped tensile-shear composite failure and Y-shaped tensile-shear composite failure. Under biaxial compression, the ultimate failure mode is single-inclined plane shear failure dominated by shear cracks. Whether it is uniaxial compression or biaxial compression, the crack initiation position of the main fracture surface is near the end of the major axis of the oval hole. (2) Under uniaxial compression, the axial stress–strain curve of rock containing the oval hole is smooth before and after the peak, but under biaxial compression, there is obvious fluctuation in the post-peak stage due to crack initiation and propagation. In both uniaxial and biaxial compression, the pre-peak elastic stage of the axial stress–strain curve of the rock containing the oval hole is significantly shortened and the peak stress is significantly reduced compared with the intact rock, which indicates that the bearing capacity of the rock is seriously reduced by the existence of oval hole. (3) When the position and major–minor axis ratio of the oval hole remain unchanged, the uniaxial compressive strength and biaxial compressive strength increase with the increase of the dip angle of the oval hole. When the position and dip angle of the oval hole remain unchanged, the uniaxial compressive strength and biaxial compressive strength decrease with the increase of the major–minor axis ratio of the oval hole. (4) At different dip angles, the brittleness index Bi of rock containing oval holes decreases with the increase of confining pressure, and the brittleness degree shows a gradual weakening trend. At the same time, when the dip angle increases, the decreasing amplitude of brittleness index Bi decreases with the increase of confining pressure. Three types of failure modes of rock with elliptical hole are systematically summarised, and the failure mechanisms of elliptical hole rock are revealed. The influence of different positions, major–minor axis ratio, and dip angle of rock containing oval holes on uniaxial compression and biaxial compression are studied. The relationship between brittleness index and failure mode of rock containing the oval hole is investigated. [ABSTRACT FROM AUTHOR]