Search

Nanosuspensions can effectively increase saturation solubility and improve the bioavailability of poorly water-soluble drugs attributed to high loading and surface-to-volume ratio. Wet media milling has been regarded as a scalable method to prepare nanosuspensions because of its simple operation and easy scale-up. In recent years, besides particle aggregation and Ostwald ripening, polymorphic transformation induced by processing has become a critical factor leading to the instability of nanosuspensions. Therefore, this review aims to discuss the influence factors comprehensively and put forward the corresponding improvement strategies of polymorphic transformation during the formation of nanosuspensions. In addition, this review also demonstrates the implication of molecular simulation in polymorphic transformation. The competition between shear-induced amorphization and thermally activated crystallization is the global mechanism of polymorphic transformation during media milling. The factors affecting the polymorphic transformation and corresponding improvement strategies are summarized from formulation and process parameters perspectives during the formation of nanosuspensions. The development of analytical techniques has promoted the qualitative and quantitative characterization of polymorphic transformation, and some techniques can in situ monitor dynamic transformation. The microhydrodynamic model can be referenced to study the stress intensities by analyzing formulation and process parameters during wet media milling. Molecular simulation can be used to explore the possible polymorphic transformation based on the crystal structure and energy. This review is helpful to improve the stability of nanosuspensions by regulating polymorphic transformation, providing quality assurance for nanosuspension-based products. Polymorphic transformation depends on the intensity and temperature of milling. Stress intensities of milling can be elucidated and improved by microhydrodynamics. Higher stress intensities of milling perhaps be accompanied by higher temperatures. Molecular simulation used in polymorphs is based on crystal structure and energy. Molecular dynamics simulations can demonstrate the stability of amorphous forms. [ABSTRACT FROM AUTHOR]

Liposomes are versatile delivery systems and immunological adjuvants that not only can load various antigens, such as proteins, peptides, nucleic acids and carbohydrates, but also can combine them with immunostimulators. Liposomes have great potential in the development of new types of vaccines, and much effort has been devoted to enhancing vaccine efficacy in recent years. Different types of immune cells such as macrophages and dendritic cells play an important role in the immune response and in preventing or treating cancer, allergy or many other infectious diseases. Targeting liposome-based delivery systems to certain immune cells and organs is one of the most effective measures in such treatments. Extensive research has shown that liposomes combined with immunostimulators or modified with pattern recognition receptor ligands can target various immune cells and the lymphatic system, thus not only inducing and promoting the desired immune response but also decreasing adverse effects throughout the body and avoiding targeting irrelevant cell types or tissues. Therefore, in this review, we outline some targeting strategies that can be adopted in the design of liposomal vaccines to improve vaccine efficacy, and we summarise the related liposome-based vaccine applications in several diseases. These applications have great potential to treat or prevent some infectious and intractable diseases. [ABSTRACT FROM AUTHOR]

The cationic dimethyldioctadecylammonium/trehalose 6,6,9-dibehenate (DDA/TDB) liposome is as a strong adjuvant system for vaccines, with remarkable immunostimulatory activity. The mucosal administration of vaccines is a potential strategy for inducing earlier and stronger mucosal immune responses to infectious diseases. In this study, we assessed whether the intranasal administration of cationic DDA/TDB liposomes combined with influenza antigen A (H3N2) can be used as a highly efficacious vaccine to induce mucosal and systemic antibody responses. Confocal laser scanning microscopy and a flow-cytometric analysis showed that the uptake of the cationic DDA/TDB liposome carrier was significantly higher than that of neutral 1,2-distearoyl-sn-glycero-3-phosphocholine/cholesterol (DSPC/Chol) or cationic 1,2-dioleoyl-3-trimethylammonium-propane/3β-(N-[N′,N′-dimethylaminoethane]-carbamoyl (DOTAP/DC-Chol) liposomes. Our results indicate that the cationic DDA/TDB liposome is more effective in facilitating its uptake by dendritic cells (DCs) in vitro than the DSPC/Chol or DOTAP/DC-Chol liposome. DCs treated with DDA/TDB liposomes strongly expressed CD80, CD86, and MHC II molecules, whereas those treated with DSPC/Chol or DOTAP/DC-Chol liposomes did not. C57BL/6 mice intranasally immunized with H3N2-encapsulating cationic DDA/TDB liposomes had significantly higher H3N2-specific s-IgA levels in their nasal wash fluid than those treated with other formulations. The DDA/TDB liposomes also simultaneously enhanced the serum IgG IgG2a, IgG1, and IgG2b antibody responses. In summary, DDA/TDB liposomes effectively facilitated their uptake by DCs and DCs maturation in vitro, and induced significantly higher mucosal IgA, systemic IgG, IgG1, and IgG2b antibody titres than other formulations after their intranasal administration in vivo. These results indicate that DDA/TDB liposomes are a promising antigen delivery carrier for clinical antiviral applications. [ABSTRACT FROM AUTHOR]

Multicomponent formulations have attracted increasing attention because of their favourable patient compliance and greater therapeutic effect. The aim of this study was to develop a multicomponent nanosuspension formulation of bufadienolides, the antitumor components of a traditional Chinese medicine, toad venom, using a wet-milling technique to improve its dissolution behaviour. Croscarmellose sodium (CCS) and sodium lauryl sulfate (SLS) were chosen as the combined stabilizers of the nanosuspension. A Taguchi orthogonal array design was used for this study to optimize the formulation and process parameters. The optimized nanosuspension was characterized by its particle size distribution, zeta potential, morphology, crystallinity, molecular interactions, stability and dissolution. The results showed that the nanosuspension was a homogeneous amorphous system with average particle sizes of <100 nm and significantly improved dissolution behaviour. It was also physically stable for at least 2 months; steric and kinetic stabilization were its main stability mechanisms. These findings suggested that the use of wet milling to fabricate nanosuspensions is a promising method for achieving the fast and synchronized dissolution of multicomponent formulations, presumably increasing the bioavailability of poorly water-soluble drugs. [ABSTRACT FROM AUTHOR]

Luminescent semiconductor nanocrystals, also known as quantum dots (QDs), have rich surface chemistry and unique optical properties that make them useful as probes or carriers for molecular diagnostics and therapeutics. However, their potential toxicity and instability in biological environments have puzzled scientific researchers. Much research effort has been devoted to encapsulation of QDs with liposomal hybrids to make them versatile nanocarriers for simultaneous therapeutics and diagnostics (theranostics) and considerable progress has been made over recent years. We provide an overview of the use of QD–liposome complexes (QLCs) for imaging applications, in particular applications in theranostics. More specifically, the design considerations, intracellular uptake and tissue-specific targeting of QLCs are highlighted. Current findings of QLCs for theranostics are discussed. We also discuss the challenges and highlight future directions for applications of liposome–QD hybrid nanocarriers in the biomedical arena. [ABSTRACT FROM AUTHOR]

Oxymatrine (OM) can be metabolized to matrine in gastrointestinal ileocecal valve after oral administration, which affects pharmacological activity and reduce bioavailability of OM. A type of multiple-unit alginate-chitosan (Alg-Cs) floating beads was prepared by the ionotropic gelation method for gastroretention delivery of OM. A solid dispersion technique was applied and incorporated into beads to enhance the OM encapsulation efficiency (EE) and sustain the drug release. The surface morphology and internal hollow structure of beads were evaluated using optical microscopy and scanning electron microscopy (SEM). The developed Alg-Cs beads were spherical in shape with hollow internal structure and had particle size of 3.49 ± 0.09 mm and 1.33 ± 0.09 mm for wet and dried beads. Over 84% of the optimized OM solid dispersion-loaded Alg-Cs beads were able to continuously float over the simulated gastric fluid for 12 hin vitro. The OM solid dispersion-loaded Alg-Cs beads showed drug EE of 67.07%, which was much higher than that of beads loading with pure OM. Compared with the immediate release of OM capsules and pure OM-loaded beads, the release of OM from solid dispersion-loaded Alg-Cs beads was in a sustained-release manner for 12 h. Prolonged gastric retention time of over 8.5 h was achieved for OM solid dispersion-loaded Alg-Cs floating beads in healthy rabbit inin vivofloating ability evaluated by X-ray imaging. The developed Alg-Cs beads loading with OM solid dispersion displayed excellent performance features characterized by excellent gastric floating ability, high drug EE and sustained-release pattern. The study illustrated the potential use of Alg-Cs floating beads combined with the solid dispersion technique for prolonging gastric retention and sustaining release of OM, which could provide a promising drug delivery system for gastric-specific delivery of OM for bioavailability enhancement. [ABSTRACT FROM AUTHOR]

A novel fluorine derivative 4,5-diaza-9-(4-methylphenyl) imino fluorene has been synthesized and evaluated as a lead(II) ion-selective ionophore in PVC membrane electrode. The influence of the nature of the plasticizers(o-NPOE, DBP, and DOS) and of the amount of incorporated ionophore and KTpClPB on the characteristics of the electrode were discussed. The electrode prepared with 5.7 mg ionophore, 187 mg o-NPOE, 92 mg PVC, and 0.11 mg KTpClPB gave a good Nernstian response of 28.8 mV/decade for lead(II) in the concentration range 1.0 × 10−6–1.0 × 10−2 mol dm−3. The limit of detection reached 1.0 × 10−7 mol dm−3. The electrode showed high selectivity toward lead over alkali, alkaline earth, and some transition metal ions. The influence of pH has been studied. The electrode exhibited better potential stability and reproducibility. The electrode was used to determine lead levels in polluted water using the developed electrode. [ABSTRACT FROM AUTHOR]