Search

This cross-sectional study aimed to describe exposure to cold climate and hand-arm vibration (HAV) as well as neurosensory and vascular symptoms and clinical findings among open-pit Arctic miners. It was based on data from questionnaires and physical examinations, including 177 men and 75 women from two open-pit mines in Sweden and Norway (response rate 54%). Working outdoors or in an unheated building or machine for at least two hours per day was reported by 44% and HAV exposure of the same duration by 10%. Neurosensory symptoms (e.g. reduced perception of touch) in the hands were reported by 47% and Raynaud's phenomenon by 14%. In brief conclusion, the study showed that Arctic miners were commonly exposed to both cold temperatures and HAV. They also reported a broad range of neurosensory and vascular symptoms in their hands and had abnormal clinical findings related to the symptoms. The results emphasise the need for additional preventive measures in this occupational setting. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate if there are differences in symptom ratings and plasma concentrations of oxylipins as a measure of acute inflammation between individuals with building-related symptoms (BRS) and referents during exposure to rooms where people experienced BRS and rooms where they did not experience BRS. Medically examined individuals with BRS and healthy, age and sex matched referents working in the same building were exposed for 60 min. Ratings of symptoms and collection of blood to measure oxylipins in plasma were performed before and after each exposure. Individuals with BRS reported more symptoms (mostly mucosal) than the referents in the problem rooms and there was a tendency towards a difference between the groups in concentration of metabolites from the cyclooxygenase pathway (COX). The mean reported intensity of symptoms among all participants was also found to be positively correlated with both COX and lipoxygenase (LOX-15) oxylipins in problem rooms. [ABSTRACT FROM AUTHOR]

The purpose was to develop a questionnaire instrument to measure difficulties in activities and participation, and impact of environmental factors in chemical intolerance, based on the International Classification of Functioning, Disability and Health, and to assess its validity and reliability. Development in three steps: (1) choosing items of relevance for chemical intolerance with an expert group, (2) conducting interviews with persons with chemical intolerance, using sampling to redundancy, (3) conducting a survey with 112 respondents at a first assessment and 91 at a second assessment for test-retest. The final version of the instrument consists of 57 items divided in three parts, which showed good internal consistency in each part, Cronbach alpha: 0.73–0.87. It had good content validity, readability and face validity. Test-retest showed good to very good (≥0.61) Kappa agreement for 37 items, and moderate (0.41–0.60) for 17 items. Three items had poor or fair (<0.41) Kappa agreement. The instrument was found to be valid and reliable. It can be used as a clinical tool to help persons with chemical intolerance to receive the best suited help and support for each individual, identify key points in rehabilitation, measure rehabilitation outcome and establish priority for treatment. The questionnaire instrument based on the International Classification of Functioning, Disability and Health which was developed and evaluated in this study, can be used to measure difficulties in activities and participation, and impact of environmental factors in chemical intolerance. Persons with chemical intolerance report lack of support from healthcare and society. Using this questionnaire instrument can help forming the best suited help and support for each individual based on his/her preconditions. This questionnaire instrument can be used to identify key points in rehabilitation and measure rehabilitation outcome. [ABSTRACT FROM AUTHOR]

Objectives: To characterise cold sensitivity using a semi-structured interview, physical examination, thermal quantitative sensory testing (QST), and laser speckle contrast analysis (LASCA). Methods: Eight women and four men, ages 22–74, with cold sensitivity were interviewed and examined by an occupational physician. Thermal perception thresholds were established using QST, on the pulp of the index and little finger of the most affected hand. Skin perfusion in the dorsum of the hand was measured using LASCA, at baseline, after two-minute 12°C water immersion, and during rewarming. Results: The physical examination yielded few findings indicative of vascular or neurosensory pathology. One subject (8%) had impaired thermal perception thresholds. LASCA at baseline showed absent proximal-distal perfusion gradients in six subjects (50%), and a dyshomogeneous perfusion pattern in five (42%). Perfusion on a group level was virtually unchanged by cold stress testing (median 52.5 PU; IQR 9.0 before versus 51.3 PU; IQR 27.2 afterwards). Conclusions: Physical examination and thermal QST offered little aid in diagnosing cold sensitivity, which challenges the neurosensory pathophysiological hypothesis. LASCA indicated disturbances in microvascular regulation and could prove a useful tool in future studies on cold sensitivity. [ABSTRACT FROM AUTHOR]

The aim of this study was to make a preliminary evaluation of the University of North Carolina passive aerosol sampler (UNC sampler) for personal air sampling of particles. Nine personal air samplings of respirable fraction were conducted in an open-pit mine, with pairwise UNC samplers and a respirable cyclone mounted on the chest of workers. UNC samples were analyzed with scanning electron microscopy (SEM) and to some extent energy dispersive X-ray spectroscopy (EDS). Respirable cyclone filter samples were weighed. Correlations and particle elemental compositions were described. Microscopic imaging of the collection surface showed that the particles were heterogeneously deposited across the surface of the UNC sampler. Collected particles were shaped as gravel particles and the resulting particle size distribution in air showed a peak at ca. 3 µm aerodynamic diameter, similarly to what has previously been reported from the same mine. The elemental composition indicated mineral origin. All correlations between the airborne mass concentrations from UNC samplers and respirable cyclones (Pearson = 0.54 and Spearman = 0.43) and between pairs of parallel UNC samplers (Pearson = 0.55 and Spearman = 0.67) were weak. The UNC sampler mass concentrations were approximately 30 times higher than those measured with the respirable cyclone. In conclusion, the UNC sampler, when used for personal sampling in a mine, provides a reasonable particle size distribution and the deposited particles appeared to be of mineral origin and not from textile or skin but the approximately 30-fold overestimation of mass concentrations when comparing with respirable cyclone sampling indicates that further improvements are necessary. Positioning of the sampler may be critical and moving the UNC sampler from the chest to e.g. the top of a helmet might be an improvement. Grounding of the sampler in order to avoid static electricity might also be useful. The UNC sampler should continue to be researched for personal sampling, as passive sampling might become a useful alternative to more laborious sampling techniques. [ABSTRACT FROM AUTHOR]

Occupational hygienists or safety engineers perform exposure assessments, mostly with very little participation by the workers. The objective of our study is to involve the workers themselves in the assessment and measurement procedure, the self- assessment method (SAE). A pilot study has been carried out involving tank truck drivers at a company transporting gasoline. The drivers were supposed to decide themselves when, and how often, they wanted to measure benzene exposure by using diffusive samplers that were then sent by mail for analysis. After every measurement they received their own results in a personal document for interpretation. The company management also received a document, which summarized all the drivers' measurements. Expert measurements, with the same type of sampler, were also accomplished to evaluate the self-assessments. The geometric mean and the 95 percent confidence intervals of the measurements made by the drivers (29 measurements) was 0.17 (0.11-0.26), and by an occupational hygienist (8 measurements) 0.12 mg/m[sup 3] (0.04-0.37). The results show that the drivers technically can perform SAE. Interviews with the workers and the management indicated that some kind of organizational support within the company is needed to implement the method into the regular internal control of the working environment. [ABSTRACT FROM AUTHOR]