Search

Alcohol fuels, primarily ethanol and methanol, have emerged as one of the important alternatives for sustainable transportation and power generation applications, due to the overall lower carbon dioxide (CO2) emissions. The higher octane number of alcohol makes it suitable for spark ignition (SI) engines while lower blend ratios can be used for compression ignition (CI) engines as well. Since significant work and exploration have already been performed for the application of alcohol in SI engines, the present study is primarily focused on alcohol utilization in CI engines. This review majorly consists of three parts: first, a discussion on the physical and chemical properties of ethanol and methanol from the fuel perspective, second, combustion, and engine performance of CI engines fueled with alcohol and lastly, emissions characterization of alcohol as fuel. A summary of this review is provided which highlights the potential of alcohol utilization in the form of blend or under dual-fuel combustion modes, as well as neat alcohol fueled CI engine. Alcohol-fueled CI engine improves the soot-NOx trade-off characteristic in comparison to conventional diesel combustion, this fuel could be an enabler to meet future emissions regulations. Overall lower CO2 emissions (up to 15% lower compared to diesel) by utilizing alcohol as fuel make it suitable for sustainable transportation. [ABSTRACT FROM AUTHOR]

This work investigates the influence of fuel injection events on the nanoparticle emission characteristics of light-duty gasoline-diesel RCCI engine. The formation of nanoparticle emissions strongly depends on fuel injection events. The present study experimentally investigates the influence of diesel injection pressure, injection timing, and port-injected gasoline mass on the nanoparticles emitted from the gasoline-diesel RCCI engine. For this purpose, the engine is tested at different engine speeds and a fixed load of 1.5 bar BMEP without exhaust gas recirculation. The particle-size and number distribution (PSD) and total particle number (total PN) concentration are measured using a differential mobility spectrometer. The results depict that at higher diesel injection pressure (IP) operation, the peak of the NMP increases while the AMP peak decreases for neat diesel operation as well as RCCI engine. Nucleation, as well as accumulation mode particles, increases with advanced diesel injection timing in RCCI combustion. An increase in port fuel injected mass also leads to an increase in the total particle concentration and total unburned hydrocarbon (THC) emissions. [ABSTRACT FROM AUTHOR]