Search

The incompatible thermoplastic poly lactic acid/carboxylated acrylonitrile butadiene rubber (PLA/XNBR) was prepared, and the effect of graphene oxide (GO) as a reinforcement and glycidyl methacrylate (GMA)-grafted XNBR (XNBR-g-GMA) as a compatibilizer on the properties of PLA/XNBR blend was investigated in this research. The microstructure, mechanical behavior, thermal, rheology, and dynamic mechanical properties of PLA/XNBR composites were investigated by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), tensile test, and dynamic mechanical thermal analysis (DMTA). The incorporation of XNBR-g-GMA improved the compatibility of the PLA/XNBR blend phases, as confirmed by microstructure and DMTA analysis. The results of the mechanical properties showed that with an increase in GO content in the PLA/XNBR/XNBR-g-GMA matrix, there was a significant improvement in tensile strength, Young's modulus, hardness, and impact strength. In order to validate the experimental mechanical and rheological results, various theoretical models were applied and a good agreement was observed between the theoretical and experimental data. [ABSTRACT FROM AUTHOR]

In this research, nanocomposites based on carboxylated nitrile rubber (XNBR)/natural rubber (NR) with different concentrations of graphene oxide (GO) were prepared by melt mixing method. The role of XNBR-grafted maleic anhydride (XNBR-g-GMA) as a compatibilizer and the effect of GO content on the morphological, mechanical, rheological, and vulcanization properties were evaluated. It was observed that with increasing the concentration of GO, the scorch and vulcanization time decreased, while the torque of the samples increased. Morphological studies illustrated that by raising the concentration of GO in the presence of a compatibilizer, the fracture surface of nanocomposites became rougher and the average size of dispersed phase decreased. In addition, the presence of XNBR-g-GMA compatibilizer improved the uniform dispersion of GO within the XNBR/XNBR-g-GMA/NR matrix. The mechanical properties of nanocomposites showed the best results for XNBR/NR with a ratio of 75/25. Theoretical studies on the mechanical and rheological properties of nanocomposites performed by Mori-Tanaka and Carreau-Yasuda models and illustrated a good agreement with experimental data. [ABSTRACT FROM AUTHOR]

In this paper, a novel rubber nanocomposite containing phenyl-vinyl-methyl-polysiloxane (PVMQ) and ethylene propylene diene monomer (EPDM) was produced during a two-roll mill procedure for mechanical applications. For this purpose, ethylene propylene diene monomer-grafted-maleic anhydride compatibilizer (EPDM-g-MAC) and graphene oxide (GO) was used as a compatibilizer and reinforcements to make a uniform composite. To study mechanical and physical characterizations, dynamic mechanical thermal analysis (DMTA), rheology, morphology, and curing characterizations of nanocomposites were investigated, which showed that compatibilizer makes GO dispersion uniformly. An electrical resistivity test was performed to study the electrical conductivity of the nanocomposites. The results indicate that the samples with higher GO content had a response to the electrical current. The curing study indicates that, by increasing the GO nanoparticles in the presence of EPDM-g-MAC, the curing properties are enhanced as well as mechanical properties by improving the bonding among GO, compatibilizer, and matrix [tensile strength (54%), modulus (68%), elongation-at-break (67%), hardness (81%), and fatigue (51%)]. FE-SEM and TEM images demonstrated that, by increasing GO nanoparticles in the presence of compatibilizer, the mean diameter of EPDM decreased in the substrate, which consequently increased the mechanical properties. The changes in surface temperature were investigated with constant voltage (75 V), which indicates that by increasing GO nanoparticles and electrical conductivity, the surface temperature increased significantly. The results of practical experiments showed good agreement with the theoretical results. [ABSTRACT FROM AUTHOR]

The current research aimed to investigate the different aspects of novel nanocomposites based on carboxylated acrylonitrile butadiene rubber (XNBR), carboxylated styrene butadiene rubber (XSBR), graphene oxide (GO), and glycidyl methacrylate-grafted XNBR compatibilizer (XNBR-g-GMAC) blend. For this purpose, the novel nanocomposites of GO-XNBR-g-GMAC/XNBR/XSBR with different XNBR, XSBR, and GO composition and with and without XNBR-g-GMAC were synthesized. The related characteristics including curing properties, swelling behavior, morphological, electrical and mechanical characteristics were studied through rheometry, swelling test, transmission electron microscopy (TEM) and scanning electron microscopy (SEM) observation, electrical resistivity, mechanical test, dynamic mechanical thermal analysis (DMTA), etc. Results of rheometric tests revealed that the addition of XNBR-g-GMAC and increasing GO content reduces the scorch time (t5) and optimum cure time (t90) and increases the crosslink density (CLD). So that the addition of 5 phr of compatibilizer and 1 phr of GO to the XNBR75/XSBR25 blend reduced the t5 and t90 by 29% and 34%, respectively. TEM micrograph confirms the GO dispersion in rubber matrix and SEM observation shows that incorporation of XNBR-g-GMAC and GO reduces dispersed-phase droplet size due to the improved compatibility of XNBR and XSBR. According to the DMTA result, all the samples except XNBR/XSBR (without XNBR-g-GMAC) show one glass transition temperature (Tg) which means XNBR-g-GMAC successfully enhanced the compatibility of XNBR/XSBR. The mechanical properties of samples showed that by the increase of GO concentration tensile strength, elongation at break, modulus, fatigue life, and hardness increased. Testing surface temperature changes in constant voltage (75 V) showed that the addition of 0.3 phr GO showed the best result and the further increase of GO up to the value of 1 phr revealed the opposite result and caused a decrease of about 54%. The results of practical tests also confirm the theories. [ABSTRACT FROM AUTHOR]