Search

Chronic ischemic wounds affect millions of people causing significant pain and disability. They can be considered to be stalled in the inflammatory stage and cannot heal without additional measures. A valid animal model is necessary to evaluate the efficacy of topical wound healing therapies and wearable technologies. A porcine model, although higher in cost, maintenance, and space requirements, is superior to the commonly used rodent or rabbit model for wound healing. Previous studies have shown that pig wounds have greater similarity to human wounds in responses to a variety of treatments, including wound dressings and antibiotics. The current study created a porcine model of large chronic wounds to assess a wearable electroceutical technology, with monitoring of healing variables and infection. Electroceutical therapy is the only adjunctive treatment recommended for chronic wound therapy. A porcine model of large chronic wounds of clinically realistic size was created and utilized to evaluate a wearable electroceutical biotechnology. Multivariate non-invasive assessment was used to monitor wound progression over multiple timepoints. Outcomes suggest that a wearable electrostimulation bandage, has the potential to offer therapeutic benefit in human wounds. The tested wearable device provides the same proven effectiveness of traditional electroceutical therapy while mitigating commonly cited barriers, including substantial time requirements, and availability and complexity of currently available equipment, preventing its implementation in routine wound care. The model is also appropriate for evaluation of other wearables or topical therapeutics., Competing Interests: Declaration of competing interest The authors have no competing interests to declare., (Published by Elsevier Ltd.)

Significance: Chronic wounds fail to heal in a timely manner and exhibit sustained inflammation with slow tissue repair and remodelling. They decrease mobility and quality of life, and remain a major clinical challenge in the long-term care of many patients, affecting 6.5 million individuals annually in the U.S., decreasing mobility and quality of life. Treatment costs are a major burden on the U.S. healthcare system, totalling between $25 and $100 billion annually. Chronic wound severity depends upon several factors such as comorbidities, severity of tissue damage, infection and presence of necrosis and vary greatly in their healing mechanisms. In vivo animal models are critical for studying healing pathways of chronic wounds and seek to replicate clinical factors for trials of topical, systemic, and device-based therapeutics. This comprehensive review discusses murine, rat, lapine, canine, feline and porcine models of chronic wounds., Recent Advances: Foundational chronic wound models for several species are discussed together with refinements and advances in the time period between 2015 and 2020 which have the potential for broad utility in investigating biological and device-based wound treatment therapies for human health., Critical Issues: Chronic wounds fail to heal in a timely manner and have differing aetiologies, rendering no single in vivo animal model universally applicable., Future Directions: Further studies are required to develop clinically relevant chronic wound animal model which reflect the clinical reality of the various influences of age, disease, comorbidities and gender on delayed healing and enhance understanding of the biological processes of human wound healing., (Copyright © 2021 Tissue Viability Society. Published by Elsevier Ltd. All rights reserved.)

Study Aim: Effective pressure relief cushions are identified as a core assistive technology need by the World Health Organization Global Cooperation on Assistive Technology. High quality affordable wheelchair cushions could provide effective pressure relief for many individuals with limited access to advanced assistive technology., Materials: Value driven engineering (VdE) principles were employed to develop a prototype modular cushion. Low cost dynamically responsive gel balls were arranged in a close packed array and seated in bilayer foam for containment and support. Two modular cushions, one with high compliance balls and one with moderate compliance balls were compared with High Profile and Low Profile Roho ® and Jay ® Medical 2 cushions., Methods: ISO 16480-2 biomechanical standardized tests were applied to assess cushion performance. A preliminary materials cost analysis was carried out. A prototype modular cushion was evaluated by 12 participants who reported satisfaction using a questionnaire based on the Quebec User Evaluation of Satisfaction with Assistive Technology (QUEST 2.0) instrument., Results: Overall the modular cushions performed better than, or on par with, the most widely prescribed commercially available cushions under ISO 16480-2 testing. Users rated the modular cushion highly for overall appearance, size and dimensions, comfort, safety, stability, ease of adjustment and general ease of use. Cost-analysis indicated that every modular cushion component a could be replaced several times and still maintain cost-efficacy over the complete cushion lifecycle., Conclusion: A VdE modular cushion has the potential provide effective pressure relief for many users at a low lifetime cost., (Copyright © 2017. Published by Elsevier Ltd.)

Study Aim: Pressure ulcers (PU) are a common comorbidity among wheelchair users. An appropriate wheelchair cushion is essential to relieve pressure and reduce PU development during sitting. The microenvironment, specifically excessive heat and moisture, impacts risk for PU development. An effective wheelchair cushion should maintain a healthy microenvironment at the seating interface. Measurement of heat and moisture can characterize microenvironmental conditions at the wheelchair cushion interface under load. We describe the development of a Sitting MicroEnvironment Simulator (SMES) for the reliable assessment of wheelchair cushion microenvironments., Materials: The prototype SMES was developed for use mounted on a Materials Testing Systems (MTS) 810(®) uniaxial servo-hydraulic loading rig and used to assess microenvironmental conditions for Jay Medical Jay 2(®), Roho High Profile Dry Floatation(®) and Low Profile Dry Floatation(®) cushions and a novel modular gel cushion., Methods: Each cushion was assessed for two hours in triplicate. The SMES was used to load the cushions to 300N ± 10N, with an interface surface temperature of 37 °C±1 °C and fluid delivery of 13 mL/h±1 mL/h of water. Interface temperature and humidity were measured at the left ischial tuberosity (IT) region every five minutes., Results: Heat and moisture responses were similar for the three commercial cushions. The modular gel cushion stayed cooler for at least 15 min longer than any commercial cushion., Conclusions: The SMES maintained performance to technical specifications for over one hundred hours of total testing and is a reliable tool for characterizing the microenvironmental conditions of wheelchair cushions., (Published by Elsevier Ltd.)

Study Aim: Stereophotogrammetric digital imaging enables rapid and accurate detailed 3D wound monitoring. This rich data source was used to develop a statistically validated model to provide personalized predictive healing information for chronic wounds., Materials: 147 valid wound images were obtained from a sample of 13 category III/IV pressure ulcers from 10 individuals with spinal cord injury., Methods: Statistical comparison of several models indicated the best fit for the clinical data was a personalized mixed-effects exponential model (pMEE), with initial wound size and time as predictors and observed wound size as the response variable. Random effects capture personalized differences., Results: Other models are only valid when wound size constantly decreases. This is often not achieved for clinical wounds. Our model accommodates this reality. Two criteria to determine effective healing time outcomes are proposed: r-fold wound size reduction time, t(r-fold), is defined as the time when wound size reduces to 1/r of initial size. t(δ) is defined as the time when the rate of the wound healing/size change reduces to a predetermined threshold δ < 0. Healing rate differs from patient to patient. Model development and validation indicates that accurate monitoring of wound geometry can adaptively predict healing progression and that larger wounds heal more rapidly. Accuracy of the prediction curve in the current model improves with each additional evaluation., Conclusion: Routine assessment of wounds using detailed stereophotogrammetric imaging can provide personalized predictions of wound healing time. Application of a valid model will help the clinical team to determine wound management care pathways., (Published by Elsevier Ltd.)

Study Aim: Some individuals with spinal cord injury (SCI) remain pressure ulcer (PU) free whilst others experience a recurring cycle of tissue breakdown. Detailed analysis of gluteal muscle characteristics may provide insights to local tissue viability variability. The study hypothesis was that SCI individuals have altered muscle composition compared to able-bodied (AB)., Materials: Ten AB and ten SCI received a supine pelvic CT scan, with contrast., Methods: Cross-sectional area (CSA) and overall muscle volume were derived using image analysis. Gluteal muscle tissue type was classified at the S2/S3 sacral vertebrae midpoint, the superior greater trochanters margin (GT) and the inferior ischial tuberosities margin (IT) using the linear transformation Hounsfield Unit scale., Results: SCI gluteal CSA was less than for AB throughout the muscle, with the greatest relative atrophy at the IT (48%). Average AB gluteal volume was nearly double SCI. Eight SCI had over 20% infiltrative adipose tissue, three with over 50%. SCI gluteal CSA and intramuscular fat infiltration were significantly negatively correlated (p < 0.05). SCI IT axial slices showed less lean muscle and higher intramuscular fat infiltration than more proximally (p < 0.05)., Conclusion: SCI gluteal muscle characteristics were indicative of impaired tissue viability. SCI disuse muscle atrophy was anticipated; the analytic approach further indicated that intramuscular atrophy was not uniform. SCI muscle composition showed increased proportions of both low density muscle and adipose tissue. CT scan with contrast is effective for gluteal muscle characterization. This assessment technique may contribute to determination of personalized risk for PU development and other secondary complications., (Published by Elsevier Ltd.)