Search

Air cleaning efficiency tests on placing material load into the lavsan biofilter were carried out. Testing included butanol vapour-contaminated air stream pulled during the boot. The studies were conducted by the Department of Environmental Protection at VGTU that developed a biofilter - an experimental biological air cleaning device. Measurements were done using 60 lmin and 90 lmin air volume aspirators under the initial pollutant concentration making 180,305, 350,440 and 545 mg/m³. Before measuring the concentrations of butanol lavsan cartridge, loading was periodically irrigated with nutrient-rich solution. In order to evaluate the influence of microorganisms on genus Pseudomonas, cleaning efficiency tests were repeated - Boot was moistened with water only, which allowed measuring butanol vapour concentrations after the cartridge. At the concentration of 180±9 mg/m³, efficiency reached 41% at a speed of 0,07 m/s and 46 % at a speed of 0,10 m/s. Measuring the performance of the initial concentration of 545±67 mg/m³, efficiency was 54% at 0,07 m/s and 53 % at 0,10 m/s respectively. [ABSTRACT FROM AUTHOR]

A four -- section trickle biofilter was constructed for experimental research. The filter was filled with the packing material of artificial origin. The material consists of plastic balls having a large surface area. The dependence of biofilter aerodynamic resistance on supply air flow rate and the number of filter sections was determined. The aerodynamic resistance of the biofilter was measured in two cases. In the first case, the packing material of the filter was dry, whereas in the second case it was wet. The experimental research determined that an increase in the air flow rate from 0.043 m/s to 0.076 m/s causes an increase in biofilter aerodynamic resistance from 30.5 to 62.5 Pa after measuring four layers of dry packing material. In case of wet packing material, biofilter aerodynamic resistance after measuring four layers of plastic balls increases from 42.1 to 90.4 Pa. [ABSTRACT FROM AUTHOR]