Search

Environmental assessments are crucial for the management of the environmental impacts of a product in a rapidly developing world. The design phase creates opportunities for acting on the environmental issues of products using life cycle assessment (LCA). However, the LCA is hampered by a lack of information originating from distinct scales along the product or technology value chain. Many studies have been undertaken to handle similar problems, but these studies are case-specific and do not analyze the development options in the initial design phase. Thus, systematic studies are needed to determine the possible scaling. Knowledge from such screening studies would open the door for developing new methods that can tackle a given scaling problem. The present article proposes a scale-up procedure that aims to generate a new life cycle inventory (LCI) on a theoretical industrial scale, based on information from laboratory experiments. Three techniques are described to obtain the new LCI. Investigation of a laboratory-scale procedure is discussed to find similar industrial processes as a benchmark for describing a theoretical large-scale production process. Furthermore, LCA was performed on a model system of nanofiber electrospinning for Li-ion battery cathode applications. The LCA results support material developers in identifying promising development pathways. For example, the present study pointed out the significant impacts of dimethylformamide on suspension preparation and the power requirements of distinct electrospinning subprocesses. Nanofiber-containing battery cells had greater environmental impacts than did the reference cell, although they had better electrochemical performance, such as better wettability of the electrode, improving the electrode's electrosorption capacity, and longer expected lifetime. Furthermore, material and energy recovery throughout the production chain could decrease the environmental impacts by 40% to 70%, making the nanofiber a promising battery cathode. Integr Environ Assess Manag 2016;12:465-477. © 2016 SETAC.

Background Robotics was introduced in clinical practice more than two decades ago, and it has gained remarkable popularity for a wide variety of laparoscopic procedures. We report our results of robot-assisted laparoscopic surgery (RALS) in the most commonly applied general surgical procedures. Method Ninety seven patients underwent RALS from 2009 to 2012. Indications for RALS were cholelithiasis, gastric carcinoma, splenic tumors, colorectal carcinoma, benign colorectal diseases, non-toxic nodular goiter and incisional hernia. Records of patients were analyzed for demographic features, intraoperative and postoperative complications and conversion to open surgery. Results Forty six female and 51 male patients were operated and mean age was 58,4 (range: 25-88). Ninety three out of 97 procedures (96%) were completed robotically, 4 were converted to open surgery and there were 15 postoperative complications. There was no mortality. Conclusion Wide variety of procedures of general surgery can be managed safely and effectively by RALS. Copyright © 2015 John Wiley & Sons, Ltd.

Polypropylene (PP) composite filaments containing two different nucleating agents—DMDBS (3 : 2, 4-bis(3,4-dimethyldibenzylidene) sorbitol) and NA11 (sodium 2,2′-methylene-bis(4,6-di-tertbutylphenyl)-phosphate) were melt spun to modify polymer electrostatic charging characteristics. Sample filaments were charged with a corona instrument and their surface potentials were measured. Initial surface potential as well as potential stability was monitored through an accelerated decay procedure. NA11 was found to be more efficient as an electret additive leading to a 50% increase in charge stability. Filaments with DMDBS exhibited a faster decay. Charging at elevated temperatures resulted in enhanced charge density and stability for both additives. The fiber microstructure was examined by Wide Angle X-ray Diffraction and Differential Scanning Calorimetry. Rather than reducing the crystal sizes, X-Ray diffractograms suggest that the crystal size increases with the addition of nucleating agents, while the degree of crystallinity appears to remain unaltered. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2068–2075, 2013

Background This article reports on patients with low rectal cancer treated with robot-assisted laparoscopic abdominoperineal resection. Methods Robot-assisted laparoscopic abdominoperineal resection was performed on seven patients in the General Surgery Clinic of Umraniye Training and Research Hospital between 2010 and 2011 by performing abdominal and perineal skin incisions using the same technique. Gender, age of the patients, intraoperative and postoperative complications, morbidity and mortality were evaluated. Results Five of the patients were male and two of them were female. Mean age was 59.2 years. All of the procedures were completed robotically. No intraoperative complication occurred, whereas urinary bladder dysfunction (n = 1) and chylous ascites (n = 1), treated conservatively, developed in the postoperative period. On histopathological examination, surgical and circumferential margins were found to be negative in all specimens. Early recurrence was not found on postoperative follow-up. Conclusion Robot-assisted laparoscopic surgery can be performed safely in narrow and deep anatomical areas, such as the pelvis. Copyright © 2012 John Wiley & Sons, Ltd.

Aim: To evaluate whether mucolytic agents have an adjuvant role with antibiotics in the treatment of children with rhinosinusitis. Methods: Ninety-two children with rhinosinusitis were recruited for this randomized, placebo controlled, double-blinded clinical trial. Mean age was 8.5 ± 3.2 years. Erdosteine (5–8 mg/kg/day) was administered to 49 children, and 43 children received placebo. Changes in symptoms were recorded with the standard S5 scoring for 14 days. Complete resolution of symptoms on day 14 was considered to be clinical improvement. Results: Eighty-one participants completed the study. Forty-one were in the treatment group and 40 in the placebo group. The average S5 scoring value at the onset of study was 11.0 in treatment group and 12.1 in placebo group. On day 14, mean scores were 3.1 in the treatment group and 2.8 in the placebo group. Complete improvement was 78% in the treatment group and 74.4% in the placebo group. There was no significant difference between the groups. There were no clinically detected serious side effects or complications in both groups. Conclusion: Use of erdosteine as a mucolytic agent in children with acute rhinosinusitis does not directly affect the success of treatment.

Solution blowing (SB) is a promising and scalable approach for the production of nanofibers. Air pressure, solution flow-rate, and nozzle-collector distance were determined as effective process parameters, while solution concentration was also reported as a material parameter. Here we performed a parametric study on thermoplastic polyurethane/dimethyl formamide (TPU/DMF) solutions to examine the effect of such parameters on the resultant properties such as fiber diameter, diameter distribution, porosity, and air permeability of the nanofibrous webs. The obtained solution blown thermoplastic polyurethane (TPU) nanofibers had average diameter down to 170 ± 112 nm, which is similar to that observed in electrospinning. However, the production rate per nozzle can be 20 times larger, which is primarily dependent on air pressure and solution flow rate (20 mL/h). Moreover, it was even possible to produce nanofibers polymer concentrations of 20%; however, this increased the average nanofiber diameter. The fibers produced from the TPU/DMF solutions at concentrations of 20% and 10% had average diameters of 671 ± 136 nm and 170 ± 112 nm, respectively. SB can potentially be used for the industrial-scale production of products such as nanofibrous filters, protective textiles, scaffolds, wound dressings, and battery components. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43025.

High-strength poly(ethylene terephthalate) (PET) fibers were obtained using low molecular weight (LMW) polymervia horizontal isothermal bath (hIB), followed by postdrawing process. We investigated the unique formations of different precursors, which differentiated in its molecular orientation and crystalline structures from traditional high-speed spinning PET fibers. Sharp increase in crystallinity was observed after drawing process even though the fibers showed almost no any crystallinity before the drawing. Properties of as-spun and drawn hIB and control filaments at different process conditions were compared. As would be expected, performances of resulted treated undrawn and drawn fibers have dramatically improved with developing unique morphologies. Tenacities more than 8 g/d for as-spun and 10 g/d for drawn treated fibers after just drawn at 1.279 draw ratio were observed. These performances are considerably higher than that of control fibers. An explanation of structural development of high-strength fibers using LMW polymer spun with hIB is proposed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42747.