Search

Degenerative disk disease of the spine is a major cause of back pain and disability. Optimization of regenerative medical therapies for degenerative disk disease requires a deep mechanistic understanding of the factors controlling the structural integrity of spinal tissues. In this investigation, we sought to identify candidate regulatory genes controlling extracellular matrix synthesis in spinal tissues. To achieve this goal we performed high throughput next generation RNA sequencing on 39 annulus fibrosus and 21 nucleus pulposus human tissue samples. Specimens were collected from patients undergoing surgical discectomy for the treatment of degenerative disk disease. Our studies identified associations between extracellular matrix genes, growth factors, and other important regulatory molecules. The fibrous matrix characteristic of annulus fibrosus was associated with expression of the growth factors platelet derived growth factor beta (PDGFB), vascular endothelial growth factor C (VEGFC), and fibroblast growth factor 9 (FGF9). Additionally we observed high expression of multiple signaling proteins involved in the NOTCH and WNT signaling cascades. Nucleus pulposus extracellular matrix related genes were associated with the expression of numerous diffusible growth factors largely associated with the transforming growth signaling cascade, including transforming factor alpha (TGFA), inhibin alpha (INHA), inhibin beta A (INHBA), bone morphogenetic proteins (BMP2, BMP6), and others. Clinical significance this investigation provides important data on extracellular matrix gene regulatory networks in disk tissues. This information can be used to optimize pharmacologic, stem cell, and tissue engineering strategies for regeneration of the intervertebral disk and the treatment of back pain. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1356-1369, 2018.

Multichannel conduits have been developed for experimental peripheral nerve and spinal cord repair. We present a series of methods to characterize multichannel nerve tubes for properties of bending, deformation, swelling, and degradation and introduce a new method to test the permeability of multichannel nerve tubes from the rate of diffusion of different-sized fluorescent dextran molecules (10, 40, and 70 kDa). First, single-lumen nerve tubes made with different poly(lactic-co-glycolic acid) (PLGA) ratios (50:50, 75:25, and 85:15) were compared. One ratio (75:25 PLGA) was subsequently used to compare single-lumen and multichannel nerve tubes. Nerve tubes made with lower PLGA ratios were found to be more flexible than nerve tubes made with a higher PLGA ratio. For low ratios, however, swelling was also greater as a result of a faster rate of degradation. Multichannel structure did not interfere with the permeability of the tube; the rate of diffusion into multichannel 75:25 PLGA nerve tubes appeared to be even higher than that into single-lumen ones, but this was only significant for 70-kDa molecules. Also, multichannel 75:25 PLGA nerve tubes were more flexible and, at the same time, more resistant to deformation. However, swelling significantly decreased the total cross-sectional lumen area, especially in multichannel 75:25 PLGA nerve tubes. Permeability, bending, deformation, swelling, and degradation are important properties to characterize in the development of multichannel nerve tubes. The methods presented in this study can be used as a basis for optimizing these properties for future, possibly clinical, application.

The use of bone grafts for orthopedic applications have increased steadily over the past decade. With improvements in surgical technique, combined with an increasing aged population requiring orthopedic treatment, the need for bone grafts substitutes have also increased. To be useful clinically, the bone graft substitute must be biocompatible, bioabsorbable, and have convenient handling properties. In addition, it must possess a microarchitecture that allows cellular ingrowth and remodeling while simultaneously providing mechanical strength. Poly(propylene fumarate) (PPF) has been investigated as an injectable, biodegradable scaffold for orthopedic applications. Various methods to create a porous, interconnected polymer scaffold are available. The foaming technique is a convenient method to accomplish this task. Reactions between bicarbonate salts and weak acids generate CO2 gas, causing a bubbling reaction during the polymerization process. This technique allows the porosity of the scaffold to be modulated. Image analysis and mechanical testing of porous PPF fabricated using the foaming technique shows that a highly porous, interconnected scaffold can be produced. At ∼50% porosity, the scaffold has excellent handling properties, contains pore sizes ranging from 50 to 500 μm with an elastic modulus ranging from 20 to 40 MPa. The foaming technique provides an additional method by which clinically useful polymers can be fabricated for use in various bone tissue engineering applications. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2008

Ankle motion analysis may provide a better method to assess function in the rat sciatic nerve model than the standard method, the sciatic functional index (SFI), but it is not widely used in experiments on nerve regeneration possibly because of complicated analysis. In this study, we investigated the practical use of a two-dimensional (2D) digital video motion analysis system. Reproducibility was investigated in normal rats. Recovery of ankle motion was analyzed after sciatic, tibial, and peroneal nerve crush injury. Results were compared with scores for the SFI. Results were not significantly different from animal-to-animal and day-to-day. Interobserver variability also was small. In the analysis of recovery after separate nerve crush injuries, subtle differences in ankle plantar flexion and dorsiflexion could be detected. The method was also more sensitive than the SFI: whereas scores for the SFI had returned to normal 4 weeks after sciatic nerve crush injury, the ankle angle at mid-stance was still significantly different from that in sham-operated animals 6 weeks after the injury. 2D digital video ankle motion analysis is a practical and sensitive method to assess function in the rat sciatic nerve model.

The ideal biomaterial for the repair of bone defects is expected to have good mechanical properties, be fabricated easily into a desired shape, support cell attachment, allow controlled release of bioactive factors to induce bone formation, and biodegrade into nontoxic products to permit natural bone formation and remodeling. The synthetic polymer poly(propylene fumarate) (PPF) holds great promise as such a biomaterial. In previous work we developed poly(DL-lactic-co-glycolic acid) (PLGA) and PPF microspheres for the controlled delivery of bioactive molecules. This study presents an approach to incorporate these microspheres into an injectable, porous PPF scaffold. Model drug Texas red dextran (TRD) was encapsulated into biodegradable PLGA and PPF microspheres at 2 microg/mg microsphere. Five porous composite formulations were fabricated via a gas foaming technique by combining the injectable PPF paste with the PLGA or PPF microspheres at 100 or 250 mg microsphere per composite formulation, or a control aqueous TRD solution (200 microg per composite). All scaffolds had an interconnected pore network with an average porosity of 64.8 +/- 3.6%. The presence of microspheres in the composite scaffolds was confirmed by scanning electron microscopy and confocal microscopy. The composite scaffolds exhibited a sustained release of the model drug for at least 28 days and had minimal burst release during the initial phase of release, as compared to drug release from microspheres alone. The compressive moduli of the scaffolds were between 2.4 and 26.2 MPa after fabrication, and between 14.9 and 62.8 MPa after 28 days in PBS. The scaffolds containing PPF microspheres exhibited a significantly higher initial compressive modulus than those containing PLGA microspheres. Increasing the amount of microspheres in the composites was found to significantly decrease the initial compressive modulus. The novel injectable PPF-based microsphere/scaffold composites developed in this study are promising to serve as vehicles for controlled drug delivery for bone tissue engineering.

Pore interconnectivity within scaffolds is an important parameter influencing cell migration and tissue ingrowth needed to promote tissue regeneration. Methods for assessment of interconnectivity are usually qualitative, restricted to two-dimensional images, or are destructive. Microcomputed tomography nondestructively provides three-dimensional (3D) images of intact specimens at high spatial resolutions. We describe an image analysis technique for quantitative assessment of scaffold interconnectivity. Scaffolds were made via a particulate leaching process with 75%, 80%, 85%, and 88% volumetric porogen fractions. Specimens were scanned and resulting 3D, digital images were analyzed with a custom algorithm. A series of virtual, idealized scaffolds were also created for illustration of the algorithm's analysis approach and for its validation. The program calculated accessible void fractions over a range of minimum connection sizes. In real specimens, nearly 100% of the porous volume was connected with outside air for connections greater than or equal to 20 microm in their smallest dimension. In scaffolds made with 75% porogen, the accessible void fraction decreased to 78% if only those connections greater than or equal to 260 microm were considered. The relationship between accessible void fraction and connection size varied as a function of porogen content. The interconnectivity parameter described here may have implications for cell migration and tissue growth into scaffolds.

We developed poly(propylene fumarate)/poly(lactic-co-glycolic acid) (PPF/PLGA) blend microspheres and investigated the effects of various processing parameters on the characteristics of these microspheres. The advantage of these blend microspheres is that the carbon–carbon double bonds along the PPF backbone could be used for their immobilization in a PPF scaffold. Microspheres containing the model drug Texas red dextran were fabricated using a double emulsion-solvent extraction technique. The effects of the following six processing parameters on the microsphere characteristics were investigated: PPF/PLGA ratio, polymer viscosity, vortex speed during emulsification, amount of internal aqueous phase, use of poly(vinyl alcohol) (PVA) in the internal aqueous phase, and PVA concentration in the external aqueous phase. Our results showed that the microsphere surface morphology was affected most by the viscosity of the polymer solution. Microspheres fabricated with a kinematic viscosity of 39 centistokes had a smooth, nonporous surface. In most microsphere formulations, the model drug was dispersed uniformly in the polymer matrix. For all fabricated formulations, the average microsphere diameter ranged between 19.0 and 76.9 μm. The external PVA concentration and vortex speed had most effect on the size distribution. Entrapment efficiencies varied from 60 to 98% and were most affected by the amount of internal aqueous phase, vortex speed, and polymer viscosity. Overall, we demonstrated the ability to fabricate PPF/PLGA blend microspheres with similar surface morphology, entrapment efficiency, and size distribution as conventional PLGA microspheres. © 2004 Wiley Periodicals, Inc. J Biomed Mater Res 70A: 283–292, 2004