Search

Terpenoids have an impressive structural diversity and provide valuable substances for a variety of industrial applications. Among terpenes, the sesquiterpenes (C15 ) are the largest subclass with bioactivities ranging from aroma to health promotion. In this article, we show a gram-scale production of the sesquiterpene α-humulene in final aqueous concentrations of 2 g L-1 with the recombinant strain Cupriavidus necator pKR-hum in a fed-batch mode on fructose as carbon source and n-dodecane as an extracting organic phase for in situ product removal. Since C. necator is capable of both heterotrophic and autotrophic growth, we additionally modeled the theoretically possible yields of a heterotrophic versus an autotrophic process on CO2 in industrially relevant quantities. We compared the cost-effectiveness of both processes based on a production of 10 t α-humulene per year, with both processes performing equally with similar costs and gains. Furthermore, the expression and activity of 3-hydroxymethylglutaryl-CoA reductase (hmgR) from Myxococcus xanthus was identified as the main limitation of our constructed C. necator pKR-hum strain. Thus, we outlined possible solutions for further improvement of our production strain, for example, the replacement of the hmgR from M. xanthus by a plant-based variant to increase α-humulene production titers in the future.

LysR-type transcription regulators (LTTRs) comprise one of the largest families of transcriptional regulators in bacteria. They are typically homo-tetrameric proteins and interact with promoter DNA of ~ 50-60 bp. Earlier biochemical studies have suggested that LTTR binding to promoter DNA bends the DNA and, upon inducer binding, the bend angle of the DNA is reduced through a quaternary structure change of the tetrameric LTTR, leading to the activation of transcription. To date, crystal structures of full-length LTTRs, DNA-binding domains (DBD) with their target DNAs, and the regulatory domains with and without inducer molecules have been reported. However, these crystal structures have not provided direct evidence of the quaternary structure changes of LTTRs or of the molecular mechanism underlying these changes. Here, we report the first crystal structure of a full-length LTTR, CbnR, in complex with its promoter DNA. The crystal structure showed that, in the absence of bound inducer molecules, the four DBDs of the tetrameric CbnR interact with the promoter DNA, bending the DNA by ~ 70°. Structural comparison between the DNA-free and DNA-bound forms demonstrates that the quaternary structure change of the tetrameric CbnR required for promoter region-binding arises from relative orientation changes of the three domains in each subunit. The mechanism of the quaternary structure change caused by inducer binding is also discussed based on the present crystal structure, affinity analysis between CbnR and the promoter DNA, and earlier mutational studies on CbnR. DATABASE: Atomic coordinates and structure factors for the full-length Cupriavidus necator NH9 CbnR in complex with promoter DNA are available in the Protein Data Bank under the accession code 7D98.

[NiFe]‐hydrogenases catalyze the reversible conversion of molecular hydrogen into protons end electrons. This reaction takes place at a NiFe(CN)2(CO) cofactor located in the large subunit of the bipartite hydrogenase module. The corresponding apo‐protein carries usually a C‐terminal extension that is cleaved off by a specific endopeptidase as soon as the cofactor insertion has been accomplished by the maturation machinery. This process triggers complex formation with the small, electron‐transferring subunit of the hydrogenase module, revealing catalytically active enzyme. The role of the C‐terminal extension in cofactor insertion, however, remains elusive. We have addressed this problem by using genetic engineering to remove the entire C‐terminal extension from the apo‐form of the large subunit of the membrane‐bound [NiFe]‐hydrogenase (MBH) from Ralstonia eutropha. Unexpectedly, the MBH holoenzyme derived from this precleaved large subunit was targeted to the cytoplasmic membrane, conferred H2‐dependent growth of the host strain, and the purified protein showed exactly the same catalytic activity as native MBH. The only difference was a reduced hydrogenase content in the cytoplasmic membrane. These results suggest that in the case of the R. eutropha MBH, the C‐terminal extension is dispensable for cofactor insertion and seems to function only as a maturation facilitator., The apo‐forms of [NiFe]‐hydrogenase large subunits are usually synthesized with a C‐terminal peptide extension that is proteolytically cleaved off upon incorporation of the catalytic metal center. Although to a limited amount, an artificially precleaved large subunit, which was deleted for the C‐terminal extension by genetic engineering, still received the active site components delivered by the dedicated maturation machinery. This suggests that the C‐terminal extension optimizes metal center incorporation, but is not essential for the formation of catalytically active [NiFe]‐hydrogenase.

Hydrogenases (H2 ase) catalyze the oxidation of dihydrogen and the reduction of protons with remarkable efficiency, thereby attracting considerable attention in the energy field due to their biotechnological potential. For this simple reaction, [NiFe] H2 ase has developed a sophisticated but intricate mechanism with the heterolytic cleavage of dihydrogen, where its Ni-Fe active site exhibits various redox states. Recently, new spectroscopic and crystal structure studies of [NiFe] H2 ases have been reported, providing significant insights into the catalytic reaction mechanism, hydrophobic gas-access tunnel, proton-transfer pathway, and electron-transfer pathway of [NiFe] H2 ases. In addition, [NiFe] H2 ases have been shown to play an important role in biofuel cell and solar dihydrogen production. This concept provides an overview of the biocatalytic reaction mechanism and biochemical application of [NiFe] H2 ases based on the new findings.

Polyhydroxyalkanoate (PHA) synthases catalyze the polymerization reaction of the acyl moiety of hydroxyacyl-coenzyme A into polyester. The catalytic subunit PhaC of PHA synthase has the PhaC box sequence at the active site that is typically described as G-X-C-X-G-G (X is an arbitrary amino acid), and cysteine is an active center. In this study, an amino acid replacement was introduced into the PhaC box of the PHA synthase derived from Ralstonia eutropha (PhaCRe ) to investigate the importance of highly conserved residues in polymerizing activity. Point mutagenesis revealed that PhaCRe mutants with the expanded PhaC box sequence ([GAST]-X-C-X-[GASV]-[GA]) are functional PHA synthases. These findings highlight the low mutational robustness of the last glycine residue in the PhaC box as well as that of the active center cysteine.

The natural amorphous polymer poly-beta-hydroxybutyrate (PHB-A: lyophilized Ralstonia eutropha containing 75% PHB) was used as a biological agent to control bacterial pathogens of blue mussel (Mytilus edulis) larvae. The larvae were supplied with PHB-A at a concentration of 1 or 10 mg/L for 6 or 24 hr, followed by exposure to either the rifampicin-resistant pathogen Vibrio splendidus or Vibrio coralliilyticus at a concentration of 10(5) CFU/ml. Larvae pretreated 6 hr with PHB-A (1 mg/L) survived a Vibrio challenge better relative to 24 hr pretreatment. After 96 hr of pathogen exposure, the survival of PHB-A-treated mussel larvae was 1.41- and 1.76-fold higher than the non-treated larvae when challenged with V. splendidus and V. coralliilyticus, respectively. Growth inhibition of the two pathogens at four concentrations of the monomer beta-HB (1, 5, 25 and 125 mM) was tested in vitro in LB35 medium, buffered at two different pH values (pH 7 and pH 8). The highest concentration of 125 mM significantly inhibited the pathogen growth in comparison to the lower levels. The effect of beta-HB on the production of virulence factors in the tested pathogenic Vibrios revealed a variable pattern of responses.

Alligator weed (Alternanthera philoxeroides) is a stoloniferous, amphibious and perennial herb which has invaded many parts of the world and led to serious environmental and ecological problems. In order to exploit cheap carbon source for poly(3-hydroxybutyrate) (PHB) production, alligator weed hydrolysates were prepared by acid and enzyme treatment and used for PHB production via Cupriavidus necator. The bacterium utilized alligator weed enzymatic hydrolysate and produced the PHB concentration of 3.8 ± 0.2 g/L at the conditions of pH 7.0, 27.5°C, 1.5 g/L of nitrogen source, and 25 g/L of carbon source, this exceeded the value of 2.1 ± 0.1 g/L from acid hydrolysate media at the same conditions. In order to obtain the optimum conditions of PHB production, response surface methodology was employed which improved PHB content. The optimum conditions for PHB production are as follows: carbon source, 34 g/L; nitrogen source, 2 g/L; pH, 7; temperature, 28°C. After 72 hr of incubation, the bacterium produced 8.5 g/L of dry cell weight and 4.8 g/L of PHB. The PHB was subjected to Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and Molecular weight analysis and found the melting temperature, number average molecular mass, and polydispersity were 168.20°C, 185 kDa, and 2.1, respectively.

Unpretreated rice straw was fermented by the extremely thermophilic bacterium Caldicellulosiruptor kronotskyensis, generating solubilized carbohydrates, organic acids, lignin-derived aromatics, H2 , and CO2 , which were subsequently used to produce polyhydroxybutyrate (PHB) by the chemolithoautotrophic bacterium Cupriavidus necator. The fermented liquid significantly enhanced the growth of C. necator, leading to a five-fold cell biomass yield, and a nine-fold PHB yield compared to what was obtained from conventional mineral media. This integrated process utilized all products of lignocellulose fermentation without H (electron) loss and carbon emission, while concomitantly enhancing CO2 fixation by C. necator for PHB production. The sequential coupling of C. kronotskyensis and C. necator provides not only a new biorefinery paradigm characterized by reduced pretreatment and saccharification requirements but also an efficient way for enhancing CO2 fixation.

Recently, it has been found that two types of methanol dehydrogenases (MDHs) exist in Gram-negative bacterial methylotrophs, calcium-dependent MxaFI-MDH and lanthanide-dependent XoxF-MDH and the latter is more widespread in bacterial genomes. We aimed to isolate and characterize lanthanide-dependent methylotrophs. The growth of strain La2-4T on methanol, which was isolated from rice rhizosphere soil, was strictly lanthanide dependent. Its 16S rRNA gene sequence showed only 93.4% identity to that of Methylophilus luteus MimT , and the name Novimethylophilus kurashikiensis gen. nov. sp. nov. is proposed. Its draft genome (ca. 3.69 Mbp, G + C content 56.1 mol%) encodes 3579 putative CDSs and 84 tRNAs. The genome harbors five xoxFs but no mxaFI. XoxF4 was the major MDH in the cells grown on methanol and methylamine, evidenced by protein identification and quantitative PCR analysis. Methylamine dehydrogenase gene was absent in the La2-4T genome, while genes for the glutamate-mediated methylamine utilization pathway were detected. The genome also harbors those for the tetrahydromethanopterin and ribulose monophosphate pathways. Additionally, as known species, isolates of Burkholderia ambifaria, Cupriavidus necator and Dyadobacter endophyticus exhibited lanthanide dependent growth on methanol. Thus, lanthanide can be used as an essential growth factor for methylotrophic bacteria that do not harbor MxaFI-MDH.

LysR-type transcriptional regulators (LTTRs) are among the most abundant transcriptional regulators in bacteria. CbnR is an LTTR derived from Cupriavidus necator (formerly Alcaligenes eutrophus or Ralstonia eutropha) NH9 and is involved in transcriptional activation of the cbnABCD genes encoding chlorocatechol degradative enzymes. CbnR interacts with a cbnA promoter region of approximately 60 bp in length that contains the recognition-binding site (RBS) and activation-binding site (ABS). Upon inducer binding, CbnR seems to undergo conformational changes, leading to the activation of the transcription. Since the interaction of an LTTR with RBS is considered to be the first step of the transcriptional activation, the CbnR-RBS interaction is responsible for the selectivity of the promoter to be activated. To understand the sequence selectivity of CbnR, we determined the crystal structure of the DNA-binding domain of CbnR in complex with RBS of the cbnA promoter at 2.55 A resolution. The crystal structure revealed details of the interactions between the DNA-binding domain and the promoter DNA. A comparison with the previously reported crystal structure of the DNA-binding domain of BenM in complex with its cognate RBS showed several differences in the DNA interactions, despite the structural similarity between CbnR and BenM. These differences explain the observed promoter sequence selectivity between CbnR and BenM. Particularly, the difference between Thr33 in CbnR and Ser33 in BenM appears to affect the conformations of neighboring residues, leading to the selective interactions with DNA. Database Atomic coordinates and structure factors for the DNA-binding domain of Cupriavidus necatorNH9 CbnR in complex with RBS are available in the Protein Data Bank under the accession code 5XXP.

We show that CO2 can be converted by an engineered "Knallgas" bacterium (Cupriavidus necator) into the terpene α-humulene. Heterologous expression of the mevalonate pathway and α-humulene synthase resulted in the production of approximately 10 mg α-humulene per gram cell dry mass (CDW) under heterotrophic conditions. This first example of chemolithoautotrophic production of a terpene from carbon dioxide, hydrogen, and oxygen is a promising starting point for the production of different high-value terpene compounds from abundant and simple raw materials. Furthermore, the production system was used to produce 17 mg α-humulene per gram CDW from CO2 and electrical energy in microbial electrosynthesis (MES) mode. Given that the system can convert CO2 by using electrical energy from solar energy, it opens a new route to artificial photosynthetic systems.

PHBs have attracted much attention due to their biodegradability and biocompatibility properties. The main drawback to the commercial production of them is their high cost. The recovery of PHB from bacterial cytoplasm significantly increases total processing costs. Efficient, economical and environment-friendly extraction of PHB from cells is required for its industrial production. In the present study, several non-halogenated organic solvents (ethylene carbonate, dimethyl sulfoxide, dimethyl formamide, hexane, propanol, methanol, and acetic acid) were examined for their efficacy regarding recovery at different temperatures from culture broth containing Cupriavidus necator cells. The highest recovery percentage (98.6 %) and product purity (up to 98%) were seen to be those of ethylene carbonate-assisted extraction at 150°C within 60 min of incubation time. Average molecular weight of the recovered PHB (1.3 × 106) was not significantly affected by the extraction solvent and conditions. The melting point of PHB extracted using ethylene carbonate was measured to be 176.2°C with an enthalpy of fusion of 16.8 % and the corresponding degree of crystallinity of 59.2 %. NMR and GC analyses confirmed that the extracted biopolymer was PHB. The presented strategy can help researchers to reduce the cost to obtain the final product. This article is protected by copyright. All rights reserved

Remains of a medieval foundry were excavated by archaeologists in 2013 in Verdun (France). Ancient workshops specialized in brass and copper alloys were found with an activity between 13th to 16th c. Levels of Cu, Zn and Pb reached 20000, 7000 and 6000 mg kg-1 (dw), respectively, in several soil horizons. The objective of the present work was to examine the microbial community in this contaminated site. A total of 8-22 106 reads were obtained by shotgun metagenomics in four soil horizons. Bioinformatic analyses suggest the presence of complex bacterial communities dominated by Proteobacteria. The structure of the community was not affected by metals, contrary to the set of metal-resistance genes. Using selective media, a novel strain of Cupriavidus necator (eutrophus), strain B9, was isolated. Its genome was sequenced and a novel metal resistance gene cluster with Hg resistance genes (merRTPCA) followed by 24 copper-resistance genes (actP, cusCBAF, silP, copK1, copH4QLOFGJH3IDCBARS, copH2H1, copK2) was found. This cluster is partly homologous to the cop genes of Cupriavidus gilardii CR3 and C. metallidurans CH34. Proteomics indicated that the four copH genes were differentially expressed: CopH1 and CopH2 were mostly induced by Cd while CopH4 was highly expressed by Cu.

The coupling of recombinantly expressed oxidoreductases to endogenous hydrogenases for cofactor recycling permits the omission of organic cosubstrates as sacrificial electron donors in whole-cell biotransformations. This increases atom efficiency and simplifies the reaction. A recombinant ene-reductase was expressed in the hydrogen-oxidizing proteobacterium Cupriavidus necator H16. In hydrogen-driven biotransformations, whole cells catalyzed asymmetric C=C bond reduction of unsaturated cyclic ketones with stereoselectivities up to >99 % enantiomeric excess. The use of hydrogen as a substrate for growth and cofactor regeneration is particularly attractive because it represents a strategy for improving atom efficiency and reducing side product formation associated with the recycling of organic cofactors.

The aim of this study was to evaluate the production and properties of novel extracellular polymeric substances (EPS) from glucose (EPS 1) and crude glycerol (CG) from castor beans oil (EPS 2). Cupriavidus necator IPT 027 cultivated with glucose and CG (35 °C, 150 rpm, 72 hr, pH 7, shaker) produced approximately 1.60 ± 0.01 and 2.83 ± 0.02 g l−1 EPS, respectively, with high-molecular weight (3.89 × 105 and 1.89 × 107 Da) and constituted of different functional groups such as uronic acid, monosaccharides (glucose, mannose, arabinose, and fucose) and primary amine group. The composition of the fermentable substrate influenced the melting temperature (221.11 and 230.18 °C), crystallinity (34.36% and 37.11%), degradation temperature (255.06 and 296.62 °C) and morphology. EPS showed pseudoplastic non-Newtonian fluid behavior in the aqueous solutions, presenting potential applicability biotechnological and industrial mainly in food industry as emulsifiers and biosurfactants. This is the first study on the production and characterization of EPS obtained by C. necator IPT 027 in culture with glucose and CG. Copyright © 2016 John Wiley & Sons, Ltd.

UNLABELLED Recapturing atmospheric CO2 is key to reducing global warming and increasing biological carbon availability. Ralstonia eutropha is a biotechnologically useful aerobic bacterium that uses the Calvin-Benson-Bassham (CBB) cycle and the enzyme ribulose 1,5-bisphosphate carboxylase/oxygenase (RubisCO) for CO2 utilization, suggesting that it may be a useful host to bioselect RubisCO molecules with improved CO2 -capture capabilities. A host strain of R. eutropha was constructed for this purpose after deleting endogenous genes encoding two related RubisCOs. This strain could be complemented for CO2 -dependent growth by introducing native or heterologous RubisCO genes. Mutagenesis and suppressor selection identified amino acid substitutions in a hydrophobic region that specifically influences RubisCO's interaction with its substrates, particularly O2 , which competes with CO2 at the active site. Unlike most RubisCOs, the R. eutropha enzyme has evolved to retain optimal CO2 -fixation rates in a fast-growing host, despite the presence of high levels of competing O2 . Yet its structure-function properties resemble those of several commonly found RubisCOs, including the higher plant enzymes, allowing strategies to engineer analogous enzymes. Because R. eutropha can be cultured rapidly under harsh environmental conditions (e.g., with toxic industrial flue gas), in the presence of near saturation levels of oxygen, artificial selection and directed evolution studies in this organism could potentially impact efforts toward improving RubisCO-dependent biological CO2 utilization in aerobic environments. ENZYMES d-ribulose 1,5-bisphosphate carboxylase/oxygenase, EC 4.1.1.39; phosphoribulokinase, EC 2.7.1.19.

Mixtures of crude palm kernel oil (CPKO) and oil palm tree trunk sap (OPTS) as carbon sources for the biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(3HB-co-3HHx)) by the recombinant Cupriavidus necator strain Re2058/pCB113 were investigated. Shake flask cultures using CPKO as the sole carbon source produced 5.82 g/L of cell dry weight (CDW) with 73 wt% of PHA content and 44 mol% of 3-hydroxyhexanoate (3HHx). When the total CPKO concentration in the cultures was increased from 2.5 to 7.5 g/L, a general pattern of decreasing 3HHx molar fraction (from 42 to 27 mol%) was observed in the resulting copolymer. In order to produce biopolymer with properties that resemble commodity plastics, the 3HHx molar fraction should be lowered to an optimal level of ∼12–20 mol%. The lowest 3HHx molar fraction (14 mol%) was obtained when a mixture of 4% (w/v) OPTS sugars and 1.5 g/L CPKO was used as the carbon source. The highest molar fraction of 3HHx produced (42 mol%) was observed when the cells were cultivated in 5 g/L of CPKO. 1H-NMR and 13C-NMR analyses confirmed the structure and monomer fraction of the different P(3HB-co-3HHx) polymers. This study has established a method to control the monomer molar fractions in P(3HB-co-3HHx) produced using a mixture of CPKO and sugars from OPTS.

This work demonstrates a significant advance in bioprocessing for a high-melting lipid polymer. A novel and environmental friendly solvent mixture, acetone/ethanol/propylene carbonate (A/E/P, 1:1:1 v/v/v) was identified for extracting poly-hydroxybutyrate (PHB), a high-value biopolymer, from Cupriavidus necator. A set of solubility curves of PHB in various solvents was established. PHB recovery of 85% and purity of 92% were obtained from defatted dry biomass (DDB) using A/E/P. This solvent mixture is compatible with water, and from non-defatted wet biomass, PHB recovery of 83% and purity of 90% were achieved. Water and hexane were evaluated as anti-solvents to assist PHB precipitation, and hexane improved recovery of PHB from biomass to 92% and the purity to 93%. A scale-up extraction and separation reactor was designed, built and successfully tested. Properties of PHB recovered were not significantly affected by the extraction solvent and conditions, as shown by average molecular weight (1.4 × 10(6) ) and melting point (175.2°C) not being different from PHB extracted using chloroform. Therefore, this biorenewable solvent system was effective and versatile for extracting PHB biopolymers. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:678-685, 2016.

[NiFe] hydrogenases are metalloenzymes catalyzing the reversible heterolytic cleavage of hydrogen into protons and electrons. Gas tunnels make the deeply buried active site accessible to substrates and inhibitors. Understanding the architecture and function of the tunnels is pivotal to modulating the feature of O2 tolerance in a subgroup of these [NiFe] hydrogenases, as they are interesting for developments in renewable energy technologies. Here we describe the crystal structure of the O2 -tolerant membrane-bound [NiFe] hydrogenase of Ralstonia eutropha (ReMBH), using krypton-pressurized crystals. The positions of the krypton atoms allow a comprehensive description of the tunnel network within the enzyme. A detailed overview of tunnel sizes, lengths, and routes is presented from tunnel calculations. A comparison of the ReMBH tunnel characteristics with crystal structures of other O2 -tolerant and O2 -sensitive [NiFe] hydrogenases revealed considerable differences in tunnel size and quantity between the two groups, which might be related to the striking feature of O2 tolerance.

Crude glycerol (CG), a by-product from biodiesel production, is a carbon source with potential as feedstock for polyhydroxyalkanoate (PHA) production. PHAs are biological macromolecules synthesized by microorganisms as intracellular carbon and energy storage granules. PHA production and its properties were investigated using Cupriavidus necator IPT 029 and Bacillus megaterium IPT 429 cultivated with CGs from different origins. The highest PHA extraction percentage (71.56% [w/v]) occurred when C. necator IPT 029 metabolized CG 3 (from the processing of biodiesel from castor bean oil). The gas chromatography–mass spectrometry analyses revealed novel PHA constituents as building blocks of medium (3-hydroxytetradecanoate) and long (11-hydroxyoctadecanoate) chains. Molar mass distribution revealed range of 121–6900 kDa. The initial degradation temperature ranged from 181.83 to 287.50°C and the crystallinity ranged from 35.30 to 66.70%. The results obtained indicate that C. necator IPT 029 from CG 3 could produce copolymers with industrially applicable thermophysical properties. Copyright © 2015 John Wiley & Sons, Ltd.

A number of metalloenzymes harbor unique cofactors, which are incorporated into the apo-enzymes via protein-assisted maturation. In the case of [NiFe]-hydrogenases, minimally seven maturation factors (HypABCDEF and a specific endopeptidase) are involved, making these enzymes an excellent example for studying metallocenter assembly in general. Here, we describe an innovative toolbox to study maturation involving multiple putative gene products. The two core elements of the system are a modular, combinatorial cloning system and a cell-free maturation system, which is based on recombinant Escherichia coli extracts and/or purified maturases. Taking maturation of the soluble, oxygen-tolerant [NiFe]-hydrogenase (SH) from Cupriavidus necator as an example, the capacities of the toolbox are illustrated. In total 18 genes from C. necator were analyzed, including four SH-structural genes, the SH-dedicated hyp-genes and a second set of hyp-genes putatively involved in maturation of the Actinobacterium-like hydrogenase (AH). The two hyp-sets were either expressed in their entirety from single vectors or split into functional modules, which enabled flexible approaches to investigate limitations, specificities and the capabilities of individual constituents to functionally substitute each other. Affinity-tagged Hyp-Proteins were used in pull-down experiments to demonstrate direct interactions between dedicated or non-related constituents. The dedicated Hyp-set from C. necator exhibited the highest maturation efficiency in vitro. Constituents of non-related maturation machineries were found to interact with and to accomplish partial activation of SH. In contrast to homologues of the Hyp-family, omission of the SH-specific endopeptidase HoxW completely abolished in vitro maturation. We detected stoichiometric imbalances inside the recombinant production system, which point to limitations by the cyanylation complex HypEF and the premature subunit HoxH. Purification of HoxW revealed strong indications for the presence of a putative [4Fe-4S]-cluster, which is unique among this class of maturases. Results are discussed in the context of [NiFe]-hydrogenase maturation, and in light of the capacity of the novel toolbox.

3-Hydroxypropionic acid (3-HP) can be produced in microorganisms as a versatile platform chemical. However, owing to the toxicity of the intermediate product 3-hydroxypropionaldehyde (3-HPA), the minimization of 3-HPA accumulation is critical for enhancing the productivity of 3-HP. In this study, we identified a novel aldehyde dehydrogenase, GabD4 from Cupriavidus necator, and found that it possessed the highest enzyme activity toward 3-HPA reported to date. To augment the activity of GabD4, several variants were obtained by site-directed and saturation mutagenesis based on homology modeling. Escherichia coli transformed with the mutant GabD4_E209Q/E269Q showed the highest enzyme activity, which was 1.4-fold higher than that of wild type GabD4, and produced up to 71.9 g L−1 of 3-HP with a productivity of 1.8 g L−1 h−1. To the best of our knowledge, these are the highest 3-HP titer and productivity values among those reported in the literature. Additionally, our study demonstrates that GabD4 can be a key enzyme for the development of industrial 3-HP-producing microbial strains, and provides further insight into the mechanism of aldehyde dehydrogenase activity. Biotechnol. Bioeng. 2015;112: 356–364. © 2014 Wiley Periodicals, Inc.

Summary Formic acid, acting as both carbon and energy source, is a safe alternative to a carbon dioxide, hydrogen and dioxygen mix for studying the conversion of carbon through the Calvin–Benson–Bassham (CBB) cycle into value-added chemical compounds by non-photosynthetic microorganisms. In this work, organoautotrophic growth of Ralstonia eutropha on formic acid was studied using an approach combining stoichiometric modeling and controlled cultures in bioreactors. A strain deleted of its polyhydroxyalkanoate production pathway was used in order to carry out a physiological characterization. The maximal growth yield was determined at 0.16 Cmole Cmole−1 in a formate-limited continuous culture. The measured yield corresponded to 76% to 85% of the theoretical yield (later confirmed in pH-controlled fed-batch cultures). The stoichiometric study highlighted the imbalance between carbon and energy provided by formic acid and explained the low growth yields measured. Fed-batch cultures were also used to determine the maximum specific growth rate (μmax = 0.18 h−1) and to study the impact of increasing formic acid concentrations on growth yields. High formic acid sensitivity was found in R eutropha since a linear decrease in the biomass yield with increasing residual formic acid concentrations was observed between 0 and 1.5 g l−1.

Poly-(3-hydroxybutyrate) [P(3HB)] is a polyester synthesized as a carbon and energy reserve material by a wide number of bacteria. This polymer is characterized by its thermo-plastic properties similar to plastics derived from petrochemical industry, such as polyethylene and polypropylene. Furthermore, P(3HB) is an inert, biocompatible and biodegradable material which has been proposed for several uses in medical and biomedical areas. Currently, only few bacterial species such as Cupriavidus necator, Azohydromonas lata and recombinant Escherichia coli have been successfully used for P(3HB) production at industrial level. Nevertheless, in recent years, several fermentation strategies using other microbial models such as Azotobacter vinelandii, A. chroococcum, as well as some methane-utilizing species, have been developed in order to improve the P(3HB) production and also its mean molecular weight.

Polyhydroxyalkanoate (PHA) copolyesters were synthesized by Cupriavidus necator cells in continuous feeding of cosubstrates. During the PHA accumulation phase, the composition of 3-hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), and 4-hydroxyvalerate (4HV) of the copolyesters changed with time, resulting in a change in their miscibility. The as-produced PHA finally became a miscible blend of copolymers with a broad chemical composition distribution. The good miscibility and low crystallinity of the natural P(3HB-co-3HV-co-4HV) blend lead to a remarkable increase in ductility and elongation at break. It indicates that the material properties of copolyesters can be tailored via feeding control of cosubstrates. It was also found that the fractions of natural PHA blend exhibited distinctive thermal behavior and the overall behavior of the as-produced PHA blend was primarily dependent on a fraction of high 3HB content. The material properties of a PHA blend are therefore not determined by its overall chemical composition but more likely by the combined effect of individual copolyesters or fractions. Moreover, the degree of X-ray crystallinity of random P(3HB-co-3HV-co-4HV) blend declined significantly with the increase of 3HV and 4HV content, in contrast to the high crystallinity of well-known P(3HB-co-3HV) copolyesters. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

This opinion of the EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (CEF Panel) deals with the safety assessment of Poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate), Chemical Abstracts Service (CAS) No 147398-31-0 and food contact material (FCM) substance No 1059, to produce packaging for contact with fresh whole fruits and vegetables. This biodegradable (co)polymer is produced by fermentation of genetically modified microorganisms (Cupriavidus necator) using palm oil. Specific migration was not tested because it is currently not foreseen by Regulation (EU) No 10/2011 for FCM for these two food groups. Overall migration was lower than 1 mg/dm2. No genotoxicity data are required for Poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) because of its high molecular weight. Its low molecular weight fraction below 1,000 Da is 0.5% and its migration is expected to be negligible. The polymer's major unit (89–99%), 3-hydroxybutyric acid, is an intermediate in fatty acid metabolism. Its minor unit (1–11%), 3-hydroxyhexanoic acid, was tested negative for bacterial gene mutations. Degradation products, which may be present in the (co)polymer, are crotonic acid and (E)-2-hexenoic acid. Crotonic acid is authorised for use in FCM with a specific migration limit (SML) of 0.05 mg/kg food; for (E)-2-hexenoic acid no indication for genotoxicity was identified by the EFSA CEF Panel in its 2010 group evaluation of flavouring substances in FGE.05Rev2. The CEF Panel concluded that the substance Poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) is not of safety concern if used alone or in blends with other polymers for contact with unpeeled/uncut fruits and vegetables, according to food groups Ref. nos 04.01 and 04.04 as specified in Regulation (EU) No 10/2011. Migration of crotonic acid should not exceed 0.05 mg/kg food and if this SML is met, then migration of (E)-2-hexenoic acid will also not exceed 0.05 mg/kg food.

Poly(3-hydroxybutyrate) (P(3HB)) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV), are biodegradable thermoplastic polymers. They are members of the polyhydroxyalkanoate (PHA) family, synthesized and accumulated as a carbon and energy reserve by a variety of microorganisms. The aim of this study was to evaluate the use of the proteases Corolase® L10, Alcalase® 2.4L, Corolase® 7089 and Protemax® FC and glycosidases Celumax® BC, Rohament® CL and Rohalase® Barley for the recovery of P(3HB) and P(3HB-co-3HV) synthesized by Cupriavidus necator. The enzyme Celumax® BC provided better lysis of the bacterial cell membrane and the results for the optimization of the operating conditions showed that this enzyme is most stable in acetate buffer at pH 4.0, bath at 60°C, hydrolysis time of 1 h and concentration of 0.02% (w/w). The optimization of the operating conditions showed that the enzyme Celumax® BC provided better lysis of the bacterial cell in acetate buffer at pH 4.0, bath at 60°C, hydrolysis time of 1 h and concentration of 0.02% (w/w). These conditions resulted in lysis of the membrane of the bacteria with a recovery of 93.2% P(3HB-co-3HV) with 94% purity. The results showed that the use of enzymes for the polymer extraction is an efficient process that assists in the cell disruption of Cupriavidus necator. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012

Biooxidation of benzoic acid by Ralstonia eutropha B9 provides an unusual cyclohexadiene carboxy diol that contains a quaternary stereocentre. Tricarbonyliron derivatives of this chiron, on treatment with acid, give two isomeric η(5)-cyclohexadienyl complexes as observed by NMR spectroscopy. Both of these can be subjected to the addition of nucleophiles to provide isomeric cyclohexadiene complexes with new substituent patterns, several of which have been characterised crystallographically. De-metallation of these provides a versatile library of cyclohexadiene building blocks, the utility of which is demonstrated by formal syntheses of oseltamivir. The mechanism of product formation and its stereochemical implications are discussed, as are the procedures undertaken to establish the enantiopurity of a representative cyclohexadiene product.

Transmission imaging with an environmental scanning electron microscope (ESEM) (Wet STEM) is a recent development in the field of electron microscopy, combining the simple preparation inherent to ESEM work with an alternate form of contrast available through a STEM detector. Because the technique is relatively new, there is little information available on how best to apply this technique and which samples it is best suited for. This work is a description of the sample preparation and microscopy employed by the authors for imaging bacteria with Wet STEM (scanning transmission electron microscopy). Three different bacterial samples will be presented in this study: first, used as a model system, is Escherichia coli for which the contrast mechanisms of STEM are demonstrated along with the visual effects of a dehydration-induced collapse. This collapse, although clearly in some sense artifactual, is thought to lead to structurally meaningful morphological information. Second, Wet STEM is applied to two distinct bacterial systems to demonstrate the novel types of information accessible by this approach: the plastic-producing Cupriavidus necator along with wild-type and ΔmreC knockout mutants of Salmonella enterica serovar Typhimurium. Cupriavidus necator is shown to exhibit clear internal differences between bacteria with and without plastic granules, while the ΔmreC mutant of S. Typhimurium has an internal morphology distinct from that of the wild type.

Organophosphorus pesticides (OP) are highly toxic and are widely used as insecticides. Bacterial organophosphohydrolases which hydrolyze a variety of OPs have been considered for the clean-up of polluted environments. This study describes the engineering of Escherichia coli towards the overproduction of the organophosphohydrolase (OpdA) from Agrobacterium radiobacter at the surface of polyester inclusions. The OpdA was N-terminally fused via a designed linker region to the C-terminus of polyester inclusion-forming enzyme PhaC of Ralstonia eutropha. The PhaC-L-OpdA fusion protein was overproduced by using the strong T7 promoter and when coexpressed with genes phaA (encoding β-ketothiolase) and phaB (encoding acetoacetyl-CoA reductase) from R. eutropha this led to formation of polyester inclusions abundantly displaying OpdA. These OpdA beads showed organophosphohydrolase activity of 1,840 U/g wet polyester beads or 4,412 U/g protein. Steady state kinetics revealed that when compared with free OpdA the k(cat) (s(-1)) of 139 of immobilized OpdA was reduced by about 16.5-fold while the K(M) (M) of 2.5 × 10(-4) was increased by 1.6-fold. The immobilized OpdA showed increased temperature stability. Moreover, the stability of OpdA immobilized to polyester beads was assessed by incubating OpdA beads at 25°C for up to 11 days and no significant loss in enzyme activity was detected. The application performance of the OpdA beads with respect to hydrolysis of OPs in contaminated environments was demonstrated in wool scour spiked with fluorescent coumaphos. This study demonstrated a new strategy toward the efficient recombinant production of immobilized organophosphohydrolase, the OpdA, suitable for bioremediation applications.

Summary FurX is a tetrameric Zn-dependent alcohol dehydrogenase (ADH) from Cupriavidus necator JMP134. The enzyme rapidly reduces furfural with NADH as the reducing power. For the first time among characterized ADHs, the high-resolution structures of all reaction steps were obtained in a time-resolved manner, thereby illustrating the complete catalytic events of NADH-dependent reduction of furfural and the dynamic Zn2+ coordination among Glu66, water, substrate and product. In the fully closed conformation of the NADH complex, the catalytic turnover proved faster than observed for the partially closed conformation due to an effective proton transfer network. The domain motion triggered by NAD(H) association/dissociation appeared to facilitate dynamic interchanges in Zn2+ coordination with substrate and product molecules, ultimately increasing the enzymatic turnover rate. NAD+ dissociation appeared to be a slow process, involving multiple steps in concert with a domain opening and reconfiguration of Glu66. This agrees with the report that the cofactor is not dissociated from FurX during ethanol-dependent reduction of furfural, in which ethanol reduces NAD+ to NADH that is subsequently used for furfural reduction.

Summary A two-hybrid approach was applied to screen for proteins with the ability to interact with PHB synthase (PhaC1) of Ralstonia eutropha. The H16_A0141 gene (phaM) was identified in the majority of positive clones. PhaM (26.6 kDa) strongly interacted with PhaC1 and with phasin PhaP5 but not with PhaP1 or other PHB granule-associated proteins. A ΔphaM mutant accumulated only one or two large PHB granules instead of three to six medium-sized PHB granules of the wild type, and distribution of granules to daughter cells was disordered. All three phenotypes (number, size and distribution of PHB granules) were reversed by reintroduction of phaM. Purified PhaM revealed DNA-binding properties in gel mobility shift experiments. Expression of a fusion of the yellow fluorescent protein (eYfp) with PhaM resulted in formation of many small fluorescent granules that were bound to the nucleoid region. Remarkably, an eYfp–PhaP5 fusion localized at the cell poles in a PHB-negative background and overexpression of eYfp–PhaP5 in the wild type conferred binding of PHB granules to the cell poles. In conclusion, subcellular localization of PHB granules in R. eutropha depends on a concerted expression of at least three PHB granule-associated proteins, namely PhaM, PhaP5 and PHB synthase PhaC1.

The regulatory Ni-Fe hydrogenase (RH) from the H(2)-oxidizing bacterium Ralstonia eutropha functions as an oxygen-resistant hydrogen sensor, which is composed of the large, active-site-containing HoxC subunit and the small subunit HoxB carrying Fe-S clusters. In vivo, the HoxBC subunits form a dimer designated as RH(wt). The RH(wt) protein transmits its signals to the histidine protein kinase HoxJ, which itself forms a homotetramer and a stable complex with RH(wt) (RH(wt)-HoxJ(wt)), located in the cytoplasm. In this study, we used X-ray absorption (XAS), electron paramagnetic resonance (EPR), and Fourier transform infrared (FTIR) spectroscopy to investigate the impact of various complexes between RH and HoxJ on the structural and electronic properties of the Ni-Fe active site and the Fe-S clusters. Aside from the RH(wt) protein and the RH(wt)-HoxJ(wt) complex, we investigated the RH(stop) protein, which consists of only one HoxB and HoxC unit due to the missing C-terminus of HoxB, as well as RH(wt)-HoxJ(Deltakinase), in which the histidine protein kinase lacks the transmitter domain. All constructs reacted with H(2), leading to the formation of the EPR-detectable Ni(III)-C state of the active site and to the reduction of Fe-S clusters detectable by XAS, thus corroborating that H(2) cleavage is independent of the presence of the HoxJ protein. In RH(stop), presumably one Fe-S cluster was lost during the preparation procedure. The coordination of the active site Ni in RH(stop) differed from that in RH(wt) and the RH(wt)-HoxJ complexes, in which additional Ni--O bonds were detected by XAS. The Ni--O bonds caused only very minor changes of the EPR g-values of the Ni-C and Ni-L states and of the IR vibrational frequencies of the diatomic CN(-) and CO ligands at the active-site Fe ion. Both one Fe-S cluster in HoxB and an oxygen-rich Ni coordination seem to be stabilized by RH dimerization involving the C-terminus of HoxB and by complex formation with HoxJ.

[NiFe] hydrogenases are widespread among microorganisms and catalyze the reversible cleavage of molecular hydrogen. However, only a few bacteria, such as Ralstonia eutropha H16 (Re), synthesize [NiFe] hydrogenases that perform H(2) cycling in the presence of O(2). These enzymes are of special interest for biotechnological applications. To gain further insight into the mechanism(s) responsible for the remarkable O(2) tolerance, we employ FTIR and EPR spectroscopy to study mutant variants of the membrane-bound hydrogenase (MBH) of Re-carrying substitutions of a particular cysteine residue in the vicinity of the [NiFe] active site that is characteristic of O(2)-tolerant membrane-bound [NiFe] hydrogenases. We demonstrate that these MBH variants, despite minor changes in the electronic structure and in the interaction behavior with the embedding protein matrix, display all relevant catalytic and noncatalytic states of the wild-type enzyme, as long as they are still located in the cytoplasmic membrane. Notably, in the oxidized Ni(r)-B state and the fully reduced forms, the CO stretching frequency increases with increasing polarity of the respective amino acid residue at the specific position of the cysteine residue. We purified the MBH mutant protein with a cysteine-to-alanine exchange to apparent homogeneity as dimeric enzyme after detergent solubilization from the membrane. This purified version displays increased oxygen sensitivity, which is reflected by detection of the oxygen-inhibited Ni(u)-A state, an irreversible inactive redox state, and the light-induced Ni(a)-L state even at room temperature.

For the synthesis of polylactic acid (PLA) and its copolymers by one-step fermentation process, heterologous pathways involving Clostridium propionicum propionate CoA transferase (Pct(Cp)) and Pseudomonas sp. MBEL 6-19 polyhydroxyalkanoate (PHA) synthase 1 (PhaC1(Ps6-19)) were introduced into Escherichia coli for the generation of lactyl-CoA endogenously and incorporation of lactyl-CoA into the polymer, respectively. Since the wild-type PhaC1(Ps6-19) did not efficiently accept lactyl-CoA as a substrate, site directed mutagenesis as well as saturation mutagenesis were performed to improve the enzyme. The wild-type Pct(Cp) was not able to efficiently convert lactate to lactyl-CoA and was found to exert inhibitory effect on cell growth, random mutagenesis by error-prone PCR was carried out. By employing engineered PhaC1(Ps6-19) and Pct(Cp), poly(3-hydroxybutyrate-co-lactate), P(3HB-co-LA), containing 20-49 mol% lactate could be produced up to 62 wt% from glucose and 3HB. By controlling the 3HB concentration in the medium, PLA homopolymer and P(3HB-co-LA) containing lactate as a major monomer unit could be synthesized. Also, P(3HB-co-LA) copolymers containing various lactate fractions could be produced from glucose alone by introducing the Cupriavidus necator beta-ketothiolase and acetoacetyl-CoA reductase genes. Fed-batch cultures were performed to produce P(3HB-co-LA) copolymers having 9-64 mol% of lactate, and their molecular weights, thermal properties, and melt flow properties were determined.

An integrated procedure for the recovery of polyhydroxybutyrate (PHB) produced by Cupriavidus necator based on the extraction with 1,2-propylene carbonate was evaluated. The effect of temperature (100-145°C) and contact time ( 15-45 min), precipitation period, and biomass pretreatments (pH shock and/or thermal treatments) on PHB extraction efficiency and polymer properties was evaluated. The highest yield (95%) and purity (84%) were obtained with the combination of a temperature of 130°C and a contact time of 30 min, with a precipitation period of 48 h. Under these conditions, PHB had a molecular weight of 7.4 x 10 5 , which was the highest value obtained. Lower values (2.2 x 10 5 ) were obtained for higher temperatures (145°C), while lower temperatures resulted in incomplete extraction yields (45-54%). No further yield improvement was achieved with the pH/heat pretreatments, but the polymer's molecular weight was increased to 1.3 x 10 6 . The PHB physical properties were not significantly affected by any of the tested procedures, as shown by the narrow ranges obtained for the glass transition temperature (4.8-5.0°C), melting temperature (170.1-180.1°C), melting enthalpy (77.8―88.5 J/g) and crystallinity (55-62%). 1,2-Propylene carbonate was shown to be an efficient solvent for the extraction of PHB from biomass. The precipitation procedure was found to highly influence the polymer recovery and its molecular weight. Although polymer molecular weight and purity were improved by applying pH/heat pretreatment to the biomass, the procedure involves the use of large amounts of chemicals, which increases the recovery costs and makes the process environmentally unfriendly.

Crude glycerol - a by-product of the large scale production of diesel oil from rape - is examined for its possible use as a cheap feedstock for the biotechnological synthesis of poly(3-hydroxybutyrate) (PHB). The glycerol samples of various manufacturers differ in their contamination with salts (NaCl or K 2 SO 4 ), methanol or fatty acids. At high cell density fermentation these pollutants could possibly accumulate to inhibiting concentrations. The bacteria used were Paracoccus denitrificans and Cupriavidus necator JMP 134, which accumulate PHB from pure glycerol to a content of 70 % of cell dry mass. When using crude glycerol containing 5.5 % NaCl, a reduced PHB content of 48 % was observed at a bacterial dry mass of 50 g/L. Furthermore the PHB yield coefficient was reduced, obviously due to osmoregulation. The effect of glycerol contaminated with K 2 SO 4 was less pronounced. The molecular weight of PHB produced with P. denitrificans or C. necator from crude glycerol varies between 620000 and 750000 g/mol which allows the processing by common techniques of the polymer industry.

Periplasmic membrane-bound [NiFe]-hydrogenases undergo a complex maturation pathway, including cofactor incorporation, subunit assembly, and finally twin-arginine-dependent membrane translocation (Tat). In this study, the role of the two accessory proteins HoxO and HoxQ in the maturation of the membrane-bound [NiFe]-hydrogenase (MBH) of Ralstonia eutropha H16 was investigated. MBH activity was absent in soluble as well as membrane fractions of cells with deletions in the respective genes. The absence of HoxO and HoxQ led to degradation of the small subunit precursor (preHoxK) of the MBH. The two accessory proteins directly interacted with preHoxK prior to assembly of active MBH dimer in the cytoplasm. MBH mutants with modified Tat signal peptides were disrupted in preHoxK/HoxO/HoxQ complex formation. Isolated HoxO and HoxQ proteins formed a complex in vitro with the chemically synthesized HoxK Tat signal peptide. Two functions of the two chaperones are discussed: (i) protection of the Fe-S cluster containing HoxK subunit under oxygenic conditions, and (ii) avoidance of HoxK export prior to dimerization with the large MBH subunit HoxG.

A series of P(3HB-co-3MP)s with different 3MP unit content was biosynthesized by the fermentation of W. eutropha in a medium containing sodium gluconate and DTDP as carbon sources at different pH conditions ranging from pH 6.0 to 8.0. The P(3HB-co-3MP) samples were fractioned using the solvent/nonsolvent mixed solvent chloroform/heptane and the comonomer unit composition was investigated. It was found that W. eutropha produces P(3HB-co-3MP)s with extremely different 3MP unit content ranging from 3.6 to 70.0 mol-%, depending on the pH value of the fermentation medium. The copolyester samples produced in mild basic medium have a considerably narrower compositional distribution than the samples from acidic medium. The highest polymer yield was obtained at pH 8.0.DSC diagram for P(3HB-co-3MP)s biosynthesized in different pH medium. [graph: see text] DSC diagram for P(3HB-co-3MP)s biosynthesized in different pH medium.

Highly efficient separation and purification of polyhydroxyalkanoates (PHAs) from PHA-containing cell mass is essential to production of the bioplastics from renewable resources in a cost-effective, environmentally friendly way. Based on selective dissolution of non-PHA cell mass (NPCM) by protons in aqueous solution and crystallization kinetics of PHA biopolymers, a simple process is developed and demonstrated to recover PHAs from cell mass to high purity (>97 wt %) with high yield (>95 wt %). The average molecular weight of biopolyesters is controlled, which follows an exponential function of process severity, a combined factor of processing conditions. Compared with conventional chemical treatment such as sequential surfactant and hypochlorite treatment, this new technology substantially reduces the chemical cost for PHA recovery and purification from PHA-containing cell mass.

Under adjusted experimental conditions, open-to-air cultures of lux gene-engineered Ralstonia eutropha (wholecell biosensors of copper) exhibit bioconvection, which accounts for fluctuating bioluminescence. The power spectrum of bioluminescence intensity fluctuations recorded from a cylindrical sample 9 mm in diameter and approximately 10 mm in height is characterized by a dominant low-frequency oscillation (with a characteristic period of approximately 8-12 min), which is occasionally accompanied by a few weaker oscillations. The corresponding spectral peaks emerge on a high-noise background. The spectra of bioluminescence intensity fluctuations qualitatively resemble the spectra of temperature or fluid velocity fluctuations in an appropriate turbulent thermal convection system. It has been suggested that in a bioconvective system, like in thermal convection systems, the emergence of oscillation reflects the large-scale convective circulation that spans the height of the cylindrical cell. The velocity of large-scale bioconvective circulation was estimated to be 37-48 microm/s. The occasional emergence of weaker-than-dominant oscillations was explained through the coexistence and interaction of the large-scale circulation with, presumably, a gene-expression-related cyclic process (with a characteristic period of approximately 25-50 min).