Search

The influence of epiphytic microbiota and chemical composition on fermentation quality and microbial community of Italian ryegrass silage was evaluated. Italian ryegrass harvested at the filling stage (FS) and the dough stage (DS) was sterilized by gamma-ray irradiation and inoculated as follows: (I) FS epiphytic microbiota + irradiated FS (FF); (II) FS epiphytic microbiota + irradiated DS (FD); (III) DS epiphytic microbiota + irradiated DS (DD); (IV) DS epiphytic microbiota + irradiated FS (DF).After 60 days of ensiling, silage made from irradiated FS had a lower pH and ammonia nitrogen (NHThe epiphytic microbiota played a more important role in the fermentation type, whereas the chemical composition had a great influence on the contents of fermentation end-products. However, chemical composition had a stronger effect on the microbial community of silage than the epiphytic microbiota. © 2022 Society of Chemical Industry.

To investigate the contributions of chemical and microbial diurnal variations in fermentation characteristics and bacterial community of Napier grass silage, gamma-ray irradiated Napier grass harvested at 07.00 h (AM), 12.00 h (M) and 17.00 h (PM) was inoculated with the microbiota derived from Napier grass harvested at AM, M and PM in a 3 (irradiated forage: AMNapier grass harvested at various times had different chemical compositions and epiphytic microbiota prior to ensiling. For silages inoculated with the same microbiota, the pH values, residual water soluble carbohydrates and dry matter contents increased, and lactic acid, acetic acid, propionic acid, butyric acid, ethanol and volatile fatty acids contents decreased in PMThe results indicated that chemical diurnal variation exerted an influence mainly on the extent of fermentation, whereas microbial diurnal variation affected more the bacterial community and fermentation types during Napier grass ensiling. © 2022 Society of Chemical Industry.

BACKROUND The study aims to reveal effects of hexanoic acid on microbial community, fermentation and hygienic quality of corn silages with or without fungal infection. Fungal infested (FI) and non-infested (NFI) whole-crop corn were separately ensiled without (control, CON) or with Hexanoic acid (Hex, 90% purity) at 0.2 g·kg-1 fresh weight (FW). RESULT The addition of Hex accelerated the pH decline during the first 5 d of ensiling regardless of fungal infestation. The lactic acid (LA) concentration in Hex silages was lower than that of CON during 45 d of ensiling, however the FI-Hex silage had the highest LA concentration among treatments on d 90. The Hex silage showed lower aflatoxin B1 (AFB1 ), zearalenone (ZEA), and deoxynivalenol (DON) concentrations than CON for FI silages. On d 5, the addition of Hex decreased the relative abundance of Klebsiella, Pantoea, and Enterobacter compared with CON regardless of fungal infestation, this inhibitory effect last until d 90 for NFI silages but disappeared for FI silages on d 90. The fungal infestation resulted in accumulation of Candida (34.05%) and Wickerhamomyces (19.46%). Hex decreased the relative abundance of Asperigillus, Issatchenkia and Penicillium for NFI silages on d 5, however its inhibitory effects was not observed in FI silages on d 5. CONCLUSION Fungal infestation was associated with poor fermentation and hygienic quality of corn silage, adding Hex accelerated the pH decline and maintained the antifungal activity until 90 d of ensiling, attenuating adverse effects of fungal infestation on the fermentation and preventing the accumulation of mycotoxins in corn silages. This article is protected by copyright. All rights reserved.

Aluminum–metal batteries show great potential as next-generation energy storage due to their abundant resources and intrinsic safety. However, the crucial limitations of metallic Al anodes, such as dendrite and corrosion problems in conventional aluminum–metal batteries, remain challenging and elusive. Here, we report a novel electrodeposition strategy to prepare an optimized 3D Al anode on carbon cloth with an uniform deposition morphology, low local current density, and mitigatory volume change. The symmetrical cells with the 3D Al anode show superior stable cycling (>450 h) and low-voltage hysteresis (~170 mV) at 0.5 mA cm −2. High reversibility (~99.7%) is achieved for the Al plating/stripping. The graphite | | Al-4/CC full batteries show a long lifespan of 800 cycles with 54 mAh g −1 capacity at a high current density of 1000 mA g −1, benefiting from the high capacitive-controlled distribution. This study proposes a novel strategy to design 3D Al anodes for metallic-Al-based batteries by eliminating the problems of planar Al anodes and realizing the potential applications of aluminum–graphite batteries.

Increasing soybean [Glycine max (L.) Merr.] yield has become a worldwide scientific problem in the world. Many studies have shown that ubiquitination plays a key role in stress response and yield formation. In the UniProtKB database, 2,429 ubiquitin-related proteins were predicted in soybean, however,20 were studied. One key way to address this lack of progress in increasing soybean yield will be a deeper understanding of the ubiquitin-proteasome system (UPS) in soybean. In this review, we summarized the current knowledge about soybean ubiquitin-related proteins and discussed the method of combining phenotype, mutant library, transgenic system, genomics, and proteomics approaches to facilitate the exploration of the soybean UPS. We also proposed the strategy of applying the UPS in soybean improvement based on related studies in model plants. Our review will be helpful for soybean scientists to learn current research progress of the soybean UPS and further lay a theoretical reference for the molecular improvement of soybean in future research by use of this knowledge.

Molecular motions are closely associated with the behaviors and properties of organic materials. However, monitoring molecular motions is challenging. Herein, a chiral supramolecular system consisting of L-/D-phenylalanine (LPF/DPF) as a chiral inducer and an achiral tetraphenylethene derivative (TPEF) as a molecular rotor has been proposed and explored for real-time discriminating the supramolecular motions by the visualization of circularly polarized luminescence (CPL) signal variations. Derived from the ordered molecular motions of TPEF induced by LPF/DPF, highly organized aggregates have been progressively assembled in a controlled manner with differentiated morphologies, including spherical particles, one-dimensional fibers, and floor-shaped supercrystals. Notably, increasing level of ordered aggregates, in turn, led to quenching emissions, while the CPL signals have been dramatically amplified accompanying by a sharp enhancement of luminescence dissymmetry factors (g

Obesity, a burgeoning worldwide health system challenge, is associated with several comorbidities, including non-alcoholic fatty liver disease (NAFLD), diabetes, atherosclerosis, and osteoarthritis, leading to serious problems to people's health. Adenosine is a critical extracellular signaling molecule that has essential functions in regulating most organ systems by binding to four G-protein-coupled adenosine receptors, denoted A

Self-activated Ca5 Mg3 Zn(VO4 )6 and Ca5 Mg3 Zn(VO4 )6 :xEu3+ phosphors were synthesized via a high-temperature solid-state reaction route. The crystalline structure and luminescence properties of the phosphors were analyzed using an X-ray diffractometer and a photoluminescence spectrometer. The explored results indicated that by varying calcination temperature and the raw material ratio of Ca2+ /Mg2+ /Zn2+ , the phosphors could be developed with different phases, crystallinity, and various fluorescence performances. The fluorescence spectrum of Ca5 Mg3 Zn(VO4 )6 showed a broad emission band over the range 400-650 nm under an excitation wavelength of 330 nm, as well as green light emission. Furthermore, after introduction of Eu3+ ions in Eu(VO4 )4 , the luminescence intensity of the Eu3+ ions greatly increased as the Eu3+ ion concentration increased at the 393 nm excitation wavelength, showing green-yellow light emission simultaneously. Therefore, the obtained phosphors could be used as a potential green-yellow-emitting luminescent material in a white light-emitting diode device.

The inner and surface morphology of the polyphenylene sulfide membrane could be well optimized by controlling the phase separation during the thermally induced phase separation process.

The distant metastasis in papillary thyroid carcinoma (PTC) is a major threat for PTC patients. Moreover, the involvement of long noncoding RNAs (lncRNAs) in the regulation of PTC progression has been extensively investigated. The aim of this study was to underscore whether lncRNA RP11-476D10.1 affects the proliferation, apoptosis and autophagy of PTC cells. Initially, we determined that lncRNA RP11-476D10.1 and LRRK2 were highly expressed in PTC cells. Meanwhile, through experimentation, miR-138-5p was confirmed to bind with lncRNA RP11-476D10.1 and LRRK2. It was also revealed that lncRNA RP11-476D10.1 downregulated the miR-138-5p expression, thereby upregulating the LRRK2 expression. After that, PTC cells were transfected with siRNA against RP11-476D10.1, or inhibitor or mimic of miR-138-5p to evaluate the influence of lncRNA RP11-476D10.1 on the PTC cell proliferation, apoptosis, and autophagy in vitro and on the tumor formation ability in vivo. The results showed that silenced lncRNA RP11-476D10.1 or overexpressed miR-138-5p enhanced the apoptosis and autophagy of PTC cells while reducing cell proliferation, with increased levels of Bax, LC3B, and Beclin1 and decreased Bcl-2 level were observed. The inhibitory role of silenced lncRNA RP11-476D10.1 role in the PTC development was further verified by the reduced tumor formation ability in nude mice. Our results demonstrated that lncRNA RP11-476D10.1 could bind to miR-138-5p and promote LRRK2 expression. Moreover, the silencing of lncRNA RP11-476D10.1 may inhibit the development of PTC, highlighting a novel insight for the development of superior therapeutic targets for PTC treatment.

The objective of this experiment was to characterize the dynamics of nitrogen (N) transformations in alfalfa and red clover and their mixture during ensiling. Alfalfa, red clover and a mixture of them (1:1 on fresh weight) were ensiled for 3, 5, 7, 14 and 30 days. The fermentation qualities and dynamic change of N components of the three silages were determined. Red clover and mixed silages showed better fermentation qualities, indicated by lower (p

This study was aimed to examine the characteristics of three isolated lactic acid bacteria (LAB) strains (HG24, M1, and TG1), and to evaluate their effects on fermentation characteristics, nutritive value, and in vitro digestibility in a variety of substrates. The experiments were conducted with Italian ryegrass (Lolium multiflorum Lam.), tall fescue (Festuca arundinacea Schred.), and oat (Avena sativa L.) in laboratory silo (1 L) for ensiling 30 days. All the treated silages had significantly (p

On the reported TCP-OH (See Scheme 1), other two star-shaped molecules are theoretically designed by replacement of side group of TCP-OH by N,N-di(4-methoxyphenyl)aniline for TPAP-OH and oxygen-bridged triarylamine for TBOPP-OH. The core group, phenol, is kept in three molecules. Their potential to be hole transport material in perovskite solar cells without dopants is evaluated by multiscale simulations. The properties of isolated molecules are estimated by the frontier molecular orbital, absorption spectrum, and hole mobility. After that, the HTM@CH3 NH3 PbI3 adsorbed system is studied to consider the influence of adsorption on HTM performance. Besides the primary judgment, the glass transition temperature is also simulated to determine the stability of amorphous film. Not only the chemical stability is evaluated but also the amorphous film stability is considered. The latter is almost neglected in previous theoretical studies to evaluate the properties of HTMs. The performance of a designed molecule is evaluated from both the isolated molecules and HTM@CH3 NH3 PbI3 adsorbed system including aforementioned items, which is favorable to build reliable structure-property relationship.

Melatonin functions as an endogenous protective molecule in multiple vascular diseases, whereas its effects on thoracic aortic aneurysm and dissection (TAAD) and underlying mechanisms have not been reported. In this study, TAAD mouse model was successfully induced by β-aminopropionitrile fumarate (BAPN). We found that melatonin treatment remarkably prevented the deterioration of TAAD, evidenced by decreased incidence, ameliorated aneurysmal dilation and vascular stiffness, improved aortic morphology, and inhibited elastin degradation, macrophage infiltration, and matrix metalloproteinase expression. Moreover, melatonin blunted oxidative stress damage and vascular smooth muscle cell (VSMC) loss. Notably, BAPN induced a decrease in SIRT1 expression and activity of mouse aorta, whereas melatonin treatment reversed it. Further mechanistic study demonstrated that blocking SIRT1 signaling partially inhibited these beneficial effects of melatonin on TAAD. Additionally, the melatonin receptor was involved in this phenomenon. Our study is the first to report that melatonin exerts therapeutic effects against TAAD by reducing oxidative stress and VSMC loss via activation of SIRT1 signaling in a receptor-dependent manner, thus suggesting a novel therapeutic strategy for TAAD.

BACKGROUND Silages produced with grass and legume mixtures may have positive associative effects on silage quality and animal performance when ruminants are fed the silages. The present study aimed to determine the preservation characteristics, in vitro rumen fermentation profile and microbial abundance of silages, produced with mixtures of sweet sorghum (SS) and alfalfa (AF) in different ratios: 100:0 (Control), 75:25 (SA25), 50:50 (SA50), 25:75 (SA75) and 0:100 (SA100) on a fresh weight basis. RESULTS As the proportion of AF increased in the silages, pH, acetic acid, ammonia nitrogen and crude protein (CP) concentrations, and aerobic stability increased (P

A laboratory-silo study was conducted to evaluate the fermentation quality, feed-nutritive value and aerobic stability of sweet sorghum silage with or without oil-extracted microalgae supplementation. Sweet sorghum was mixed with four microalgae levels (0%, 1%, 2% and 3% on a dry matter basis; control, M1, M2 and M3, respectively) and ensiled for 45 d. Further, the four experimental silages were subjected to an aerobic stability test lasting 7 d.; Results: All the silages except M3 silage had good fermentative characteristics with low pH and ammonia nitrogen concentrations, and high lactic acid concentrations and favorable microbial parameters. Meanwhile, oil-extracted microalgae supplementation improved the feed-nutritional value of sweet sorghum silage. Fibre (neutral detergent fibre, acid detergent fibre, acid detergent lignin and cellulose) concentrations decreased, while dry matter and crude protein levels markedly increased (P

Eight lactic acid bacteria (LAB) strains isolated from five naturally fermented silages of different ensilage materials on the Tibetan Plateau were characterized, and their effects on the silage quality of common vetch (Vicia sativa L.) were studied. These LAB isolates were evaluated using morphological, physiological and biochemical tests. The eight isolated strains and one commercial inoculant (Lactobacillus plantarum MTD‐1) were subsequently added to common vetch for ensiling 60 days. All the isolated strains (LW4, M1, WG27, O30, I2, LCG3, LCG9, CG35) could grow normally at 5–20°C, pH 3.5–6.0 and NaCl (3.0%, 6.5%), and they were identified as Lactobacillus plantarum and Pediococcus pentosaceus by sequencing 16S rDNA. All the LAB inoculants improved the silage quality of common vetch, indicated by significantly (p

γ-aluminum oxynitride (γ-AlON) with spinel structure has attracted much attention for structural and functional application. γ-AlON powders were successfully prepared by direct nitridation method of Al/Al(OH)3 starting mixture in ammonia and then calcined at high temperature. XRD, SEM, TEM, EDX, and photoluminescence were conducted to investigate the detail procedure and the optical properties of AlON: xEu phosphors. Nitrogen was introduced by the nitridation of metallic aluminum, appropriate Al amount and nitridation condition was necessary to obtain phase pure γ-AlON. The as-prepared AlON powders exhibited multifaceted grain morphology with fine particle size (1-5 μm). Eu2O3 activator was reduced and transformed to EuAl12O19 by reaction with alumina, which remained in the product when x > 0.25%. Under 331 nm excitation, AlON: xEu phosphors exhibited emission bands of 475 and 410 nm. 475 nm band reached a plateau at x = 0.25% due to the solubility of Eu2+ ion in AlON, whereas 410 nm band showed a linear increase in intensity with Eu2+ doping amount, which was believed to be the contribution of EuAl12O19. The present approach combination of direct nitridation in ammonia and postcalcination process showed potential application for AlON ceramic and AlON phosphors.