Search

Abstract This paper explores the response to Holocene ash inundation in different sub‐environments of two fluvio‐lacustrine systems, Las Piedritas and Totoral, focussing on the processes of volcaniclastic remobilisation. Sediment cores and outcrops were used to recognise three deposit types, noting how some differ from lahars, through sedimentological and stratigraphic analysis: (1) thick, laterally discontinuous, pumice‐dominated deposits occur overlying alluvial plain and lower terrace surfaces across both watersheds; (2) chaotic, extremely poorly sorted and matrix‐supported beds composed of both epiclastic and pyroclastic material occur as two conspicuous deposits at Las Piedritas outcrops, in a low‐gradient confined channel setting; and (3) layers with an exclusively pyroclastic composition and no flow sedimentary structures or fragment roundness were found draping each of the two chaotic intervals and intercalating with the background sediment in Las Piedritas prodelta. Thick pumice packages capping the floodplains resulted from the overflow of streams carrying a floating pumice load. Due to its positive buoyancy, the pumice is transported as a slowly moving overlying mantle without mixing with the streamflow. The disorganised pattern and poor sorting of the matrix‐rich polymictic beds are consistent with laminar, gravity‐driven, high‐concentration flows. They constitute secondary lahars, originating upstream from large run‐off processes that reworked a pyroclastic substrate. The lack of reworking features in the vitric‐rich units identified in the lake core retrieved from Las Piedritas prodelta, as well as the continuous and widespread occurrences of those interbedded in upstream outcrops, indicate an airfall origin. No reworked tephra unit is recognised in the prodelta sediment record, although various deposits from the hydrologic remobilisation of airfall tephra are found along the subaerial portion of both watersheds. Apparently, large amounts of flotation‐remobilised tephra were retained on the delta plain, while another considerable fraction would have been carried away from the creek mouth under the influence of dominant regional winds.

Abstract Planar lamination is a ubiquitous component of modern and ancient fine‐grained sediments deposited by subaqueous sediment gravity flows. These sediments commonly exhibit alternating sub‐millimetre‐thick, sharply bounded silt‐rich and clay‐rich layers that change little in thickness or sediment texture over lateral distances that range up to at least several tens of metres. Silt‐rich layers are moderately to well‐sorted and a few tens to hundreds of microns to a single silt‐grain thick. In contrast, clay‐rich layers are more poorly sorted, and a few tens to hundreds of microns thick. The thickness and regular alternation of these texturally differentiated interlayers, in addition to the absence of features suggesting transport bypass or deposition by migrating rugged bed forms, suggest alternating physical processes and related modes of deposition in the near‐bed region immediately above the bed. Previous interpretations have focussed on clay flocculation, which is difficult to reconcile with the high fluid shear conditions in the near‐bed region. Here it is suggested that in the millimetre to sub‐millimetre‐thick viscous sublayer at the base of a hydraulically smooth turbulent flow, a combination of high fluid shear and sediment concentration initially leads to shear thinning and enhanced mobility in the lower part of the flow, and for silt to continue settling to the bed forming a well‐sorted silt lamina. As silt settles and clay‐size sediment increases in concentration, hydrodynamic lubrication forces strengthen and reduce mobility of the near‐bed part of the flow. This condition is then perturbed by a bedward‐directed outer flow disturbance that dramatically increases frictional stresses and effective fluid viscosity and ultimately shear jamming that causes gelling and deposition of a poorly sorted clay‐rich layer. This process is then repeated multiple times to build up a deposit composed of alternating silt‐rich and clay‐rich laminae overlain by structureless mud deposited directly from suspension.

Abstract Jurassic and Palaeocene tidal deposits of the epeiric Western Interior Sea in Wyoming, USA, differ significantly due to their contrasting climates and tectonic, geographic and depositional settings. Tidally generated, cross‐bedded sandstone bodies contained by incisions are common to both settings and can potentially be uncritically attributed to marine flooding of fluvial systems. Key differences in lithology, ichnology and relationships with surrounding sediment reveal fundamentally different depositional settings, however. The Jurassic system occupied a low accommodation, semi‐arid environment, with geographically open shorelines as relative sea‐level fell, creating an unconformable contact with the underlying, storm wave‐dominated shelf and shoreface deposits. Siliciclastic, intertidal flats formed adjacent to coastal aeolian and fluvial environments during brief turnarounds from the degradational (forced regressive) to aggradational and retrogradational (transgressive) system tract. Basinward of these environments, metre to decimetre‐scale cross‐bedded, bioclastic, subtidal compound dunes and tidal inlet complexes accumulated in areas of minimal clastic flux and within incisions created by submarine tidal currents. By contrast, the Palaeocene tidal systems formed in a high accommodation, subtropical setting, as rising sea levels forced the fluvial to marine transition zone landward and flooded coastal swamps, forming geographically irregular, back‐barrier complexes and tidally influenced fluvial systems. High volumes of siliciclastics, terrigenous organic material and freshwater were delivered by the rivers and created physicochemical stress on the marine embayments. Sandy tidal flat deposits accumulated in lagoons and interdistributary bays, but unlike the Jurassic examples, they do not mark a turnaround from the falling stage to the transgressive system tract. The potential preservation window for tidalites is significantly greater vertically in the aggradational to retrogradational setting than in the degradational system due to greater accommodation. The preservation window is vertically smaller, but areally greater in the Jurassic, forced regressive system because of basinward enhancement of tidal currents driven by complex palaeobathymetry caused by tectonic activity of local pre‐Laramide uplifts.

Abstract Deltas are deposits directly accumulated by land‐generated gravity flows in a standing body of water. The paradigm of deltaic sedimentation has dramatically changed during recent years, from the popular very simplified ternary models of marine littoral deltas towards more realistic and comprehensive models, considering the importance of sediment‐laden river discharges. Ternary delta models were designed for clean rivers, where a stream flow drags the sediments. Depending on the basin dynamics, these littoral deposits can be modified, forming tidal‐dominated, wave‐dominated or fluvial‐dominated littoral deltas. In recent years, a new classification of delta systems was proposed, based on contrasting the salinity of the receiving water body with the bulk density of the incoming fluvial discharge. Rivers are highly dynamic systems, and their discharges can be very variable in terms of flow duration and sediment concentration. Additionally, the salinity of the receiving water body can exhibit significant variability, especially in closed lakes and epicontinental seas, ranging from freshwater to brines. This scenario allows the distinction of three major delta categories (hypopycnal, homopycnal and hyperpycnal deltas) which can be in turn subdivided, defining seven delta types. Hypopycnal deltas form when the bulk density of the incoming flow is lower than the density of the water in the basin, allowing the definition of three delta types, corresponding to hypersaline littoral deltas, marine littoral deltas and brackish littoral deltas. Homopycnal deltas form when the bulk density of the incoming flow is similar to the density of the water in the basin, defining a delta type termed homopycnal littoral deltas. Hyperpycnal deltas form when the bulk density of the incoming flow is higher than the density of the water in the basin, allowing the definition of three categories termed hyperpycnal littoral deltas, hyperpycnal subaqueous deltas and hyperpycnal fan deltas.

Abstract Mass movements are common on the continental slope, affecting not only the subsequent sea floor morphology but often substantially modifying the underlying deposits. Various styles of substrate interaction have been recognised, representing the various degrees of involvement of the underlying material and its incorporation into the mass movement. This work presents a new style of basal interaction not previously described. Based on the morphology of the basal surface of a mass transport deposit, this can be recognised both in seismic data and in an outcrop analogue. A subsurface example, from an ca 100 m thick mass transport deposit located in Santos Basin, offshore Brazil, displays a basal surface with spoon‐shaped scours or scoops. These scoops are of the order of tens up to 400 m in maximum dimension, where masses of underlying sediment have been removed and incorporated into the mass movement. Outcrops used for this work are located in La Rioja Province, Western Argentina, where the study involves a well‐exposed ca 200 m thick mass transport deposit that crops out continuously over 7 km. Its basal surface is incised irregularly into the underlying sandstones, incorporating the blocks of sandstone into the mass movement. The striking similarities observed between outcrop examples and the northern Santos Basin suggest that they can be effective analogues, facilitating a comprehensive understanding of mass transport deposit dynamics across diverse basin environments.

Abstract The French Flemish Coastal Plain, which extends from Denmark to France, is characterised by a topography close to sea level and protected by a system of coastal dunes. Quaternary sediments, comprised of marine, estuarine and continental deposits, accumulated by infilling and then prograding above a network of incised valleys. This study focusses on the Holocene infill of the Denna palaeoestuary, south‐west to Dunkerque. Surface geophysics (electrical conductivity and ground‐penetrating radar) and vibrocore data are used to reconstruct the landscape evolution during the last stages of sedimentation. The conductivity map highlights the last network of tidal channels, ditches and dikes of the eastern side of the palaeoestuary. Over the upper 4 m of the infill, the ground‐penetrating radar profiles show two superimposed units. The bottom unit is composed of meandering channel bars and the top unit of flat strata intersected by sparse channels, mostly infilled in place. The sediment analysis of the vibrocores shows a predominantly sandy filling of marine to estuarine origin, evidenced by sponge spicules and a fauna of bivalves and foraminifera adapted to brackish settings. The uppermost deposit exhibits an oxidation profile which marks the groundwater zone transition. Clayey sediments are also present, infilling the uppermost channels and ditches dug during reclamation, in increasing proportions towards the axis of the estuarine palaeovalley. The tidal signature of sedimentary dynamics is evidenced by heterolithic facies in some channel fills and tidal rhythmites infilling scour depressions linked to dike breaching. The abrupt decrease in channel dynamics across the unit boundary, although sedimentation remained sandy in the upper unit, coincides with the development of embankment of the estuarine border and is tentatively interpreted as a result of reclamation.

Abstract Over the past decade, there has been growing interest in the sedimentological community to use micro X‐ray computed tomography to analyse microfacies in sediment cores. However, little attention has been paid to the application of micro‐computed tomography in lithified deposits, even though this can allow their texture to be characterised in three dimensions, providing key information about sedimentary structures. A novel application of micro‐computed tomography in lithified sediment‐gravity flow deposits is presented with the objective of characterising their internal 3D sedimentary structures. This technique is applied to three deep‐marine sandstones showing different compositional properties: Cretaceous Gosau Group (Austria), Eocene Hecho Group (Spain) and the Oligocene Annot Formation (France). From micro‐computed tomography data the size of particles and their distribution throughout the sample is reconstructed in 3D permitting a better visualisation of sedimentary textures. Particle distributions computed from micro‐computed tomography are similar to those computed from thin section image analysis, corroborating the reliability of the micro‐computed tomography to evaluate grain‐size trends. Micro‐computed tomography is complemented with micro‐X‐ray fluorescence and thin section petrographic analyses. In cases where mineral composition or grain size are homogeneous or matrix and grains have similar mineral composition, sedimentary structures do not appear visible from micro‐X‐ray fluorescence or thin section analyses. By separating particles based on their computed tomography density, it is possible to isolate the coarsest fraction, highlighting the sedimentary structures. This study demonstrates (i) the potential of micro‐computed tomography in analyses of sedimentary structures from outcrop data and (ii) the importance of the mineralogical composition and degree of grain sorting in assessing the origin of structureless deposits. Considering the importance of visualising sedimentary structures when interpreting depositional processes, micro‐computed tomography is a new and reliable tool to assess the physical properties of sandstones and to analyse their internal 3D sedimentary structures.

Abstract A tufa mound developed at La Saline Lake, an oxbow of the Athabasca River in the Athabasca Oil Sands deposit of north‐east Alberta, is characterised by an unusual emplacement of a gypsum caprock. This two‐tiered architecture resulted from the bicarbonate‐saturated groundwater flow along Upper Devonian limestone being redirected deeper and encountering the halite–anhydrite dissolution trend within the underlying Middle Devonian Prairie Evaporite Formation, 175 to 200 m below. Migrations up‐section of sulphate‐saturated brine resulted in the gypsum caprock on the tufa mound and discharge of a sulphate‐saturated brine spring with total dissolved solids of ca 80,000 mg/L. The brine spring is bifurcated with flows to the south‐west and north‐west. Calcite–gypsum thrombolytic bottom sediments along the south‐western branch were covered by a halite deposit and subsequently a gypsum crust with a microbial community dominated by the cyanobacteria Coleofasciculus chthonoplastes. The thrombolite contact zone with the halite–gypsum encrustation has a more diversified community with the cyanobacteria Dactylococcopsis. Cyanobacterial mats that wrap around the bulbous gypsum crust protuberances distributed along the brine pool bottom surfaces have significant eukaryotic diversity, represented by the heterotrophic Ochrophyte Paraphysomonas. In contrast, sediments accumulated along the adjacent spring branch flow to the north‐west were thicker and clogged by abundant decomposed and fermented floral debris, unlike the deposit accumulated along the south‐western branch. This resulted in an oxygen‐depleted anaerobic environment dominated by sulphate‐reducing bacteria resulting in a calcite‐rich and sulphate‐starved anaerobic sediment with ca 20% elemental sulphur and emanation of H2S gas.

Abstract Tides are a key driver of a range of Earth system processes, and we now have the capacity to simulate tidal dynamics on a range of temporal and spatial scales. Deep‐time tidal model simulations have been used to provide insight into past ocean circulation patterns, evolution of life and the developments of the Earth‐Moon system's orbital configuration. However, these tidal model simulations are relatively poorly constrained and validated because of a lack of readily available proxies. The feasibility of using two types of proxy is explored here; (1) sedimentary deposits which can directly estimate palaeotidal ranges, and (2) black shale, to constrain three palaeotidal model simulations for different time slices. Specifically, three palaeotidal range proxies were used for the early Devonian (400 Ma), three palaeotidal range proxies and five black shales for the lower Jurassic (185 Ma), and eight black shales for the early Cretaceous (95 Ma). Both tidal proxies confirm the tidal model results in most locations. The model results for 400 Ma and 185 Ma matched 2/3 of the palaeotidal range proxies for each of these periods. The locations of black shale were compared with tidal front locations predicted by the model outputs based on the Simpson–Hunter parameter and the model results from 95 to 185 Ma agree with the black shale proxies in 10/13 of the locations. In the cases where there is a disagreement, the model resolution is probably too low to fully resolve the details of the coastal topography, or—in one case—the palaeobathymetry is incorrect. Consequently, it is argued that it is worth expanding this type of work, and that such data can be used to validate both models and reconstructions.

Abstract Landslides are among the largest mass movements on Earth. As such, the deposits of landslides, also known as mass‐transport deposits, are significant architectural elements of continental margins, especially those receiving sediment from large deltas. Landslide dams have been shown to alter the courses of rivers and submarine channels. However, there are fewer examples of landslides completely filling submarine channels and examples of the subsequent stratigraphic evolution. A three‐dimensional seismic‐reflection dataset (1500 m) Taranaki Basin, offshore the North Island of New Zealand, was used to explore the response of a sequence of channel deposits to landslide filling. The basal channel system initially meandered like a river, with successive channel positions in close proximity, as it aggraded >250 ms two‐way travel time. This systematic, organised evolution is governed by the memory of early channel evolution, which sets the sea floor geomorphology that guides channel‐forming turbidity currents. Later, a channel approximately twice as wide as underlying channels cut off a number of channel bends, probably as a result of an increase in the discharge of channel‐forming turbidity currents. This last channel was filled with submarine landslides, which transported and deposited sediment as debris flows based on the presence of blocks within a matrix comprising chaotic, lower amplitude seismic facies. These debris‐flow deposits smoothed over the sea floor, effectively wiping the memory of channel evolution. As a result, the subsequent channel pattern bears no resemblance to the basal system. Submarine‐channel resetting by landslide filling is common in settings with frequent catastrophic basin‐margin collapses, like offshore New Zealand.

Abstract Seafloor topography can affect turbidity current dynamics on deep‐water slopes, significantly influencing the dispersal of sediment. Despite the common occurrence of topographic complexity, there are few detailed investigations of topographic interactions and their effect on downslope flow evolution in intraslope environments. In this study, the sedimentology and architecture of an Upper Cretaceous intraslope fan succession deposited within an extensional, fault‐bound minibasin are described from a rare, well‐exposed, near‐continuous, oblique depositional‐dip outcrop of the Tres Pasos Formation, Chile. The 2 to 8 m thick studied interval transitions downslope from high‐energy heterolithic strata, including metre‐scale steep‐faced scours, to non‐amalgamated thick‐bedded sandstones. Abrupt increases in sandstone percentage, sandstone bed thickness and grain size occur on the hangingwall blocks of south‐east and north‐east‐dipping normal faults that bound the minibasin. Sandstone beds are dominated by backset or wavy low‐angle stratification proximally, contain compositional banding near faults, and are characterised by increased proportions of planar laminated and structureless turbidite divisions downslope along the transect. Experimental observations of turbidity current interactions with topography are synthesised into a qualitative framework, which is used to interpret flow processes and characteristics from deposit trends. The results reconstruct the response of Froude‐supercritical, stratified turbidity currents with denser basal layers when encountering metre‐scale fault scarps. The analysis shows that metre‐scale topographic features can substantially alter the flow properties of stratified turbidity currents, and their downslope flow evolution to include the development of transitional, depositional and flow‐stripped sediment gravity currents. However, in comparison to base‐of‐slope settings, overall flow conditions are interpreted to be more uniform over slope breaks and zones of flow expansion in a partially confined intraslope environment. These findings have considerable implications for understanding flow response to similar scale morphological features on the seafloor and the potential for flow transformations in intraslope settings.

Abstract The Triassic red beds of the Tabular Cover of the Iberian Meseta are an excellent reservoir outcrop analogue, a direct consequence of high‐quality exposures, which offer exceptional three‐dimensional outcrops, as well as a wide variability of depositional environments. Fluvial and transitional with tide‐influenced and wave‐influenced settings are recognised. Three point bar geobodies of similar scale, but influenced by different processes, were selected from this succession. Point bar geobody 1 was influenced by purely fluvial processes while geobodies 2 and 3 were tide‐influenced. Both types of geobody were developed as point bar deposits in sinuous channels. A fully integrated study was carried out on these geobodies, utilising both outcrop and subsurface‐based approaches, to characterise the key differences between fluvial and tidal point bars in the sedimentary record. The outcrop‐based component involved traditional field data collection methods alongside digital techniques and data capture, including the use of digital outcrop models. Additionally, subsurface‐based methods were employed, utilising core and wireline logs obtained from wells drilled in close proximity to the outcrop. The integration of these approaches aims to accurately differentiate the depositional settings of the three different geobodies, which while apparently very similar in many key respects also exhibit considerable differences when considered from the perspective of subsurface management of potentially similar geobodies. This study also emphasises the need to clearly distinguish high‐sinuosity deposits based on their depositional sub‐environment in order to properly evaluate their potential for subsurface management. Additionally, it highlights the presence and importance of internal baffles that may well influence fluid migration and indeed even compartmentalise geobodies. Three point bar geobodies of similar scale, but influenced by different processes, have been selected in this succession. A fully integrated study was carried out on these geobodies, utilising both outcrop‐based and subsurface‐based approaches, to characterise the key differences between fluvial and tidal point bars in the sedimentary record.

Abstract Using lake‐sediment cores to document past seismicity requires a comprehensive understanding of possible lateral variations in depositional processes. This study aims to reveal the lateral variations in earthquake‐induced event deposits throughout Lake Iznik, a large lake located on the middle strand of the North Anatolian Fault. Based on stratigraphic, sedimentological and geochemical analyses of 14 sediment cores from two subbasins across the lake, five different types of event deposits (T1–T5) were identified and characterised. One event deposit type (T5) is restricted to a delta mouth, characterised by the occurrence of authigenic Fe‐Mn carbonates and interpreted to result from flood events. The four other types of event deposits are characterised by their synchronicity between cores and their age consistency with historical earthquakes and are interpreted to be likely generated by earthquakes. The locally prominent 1065 CE historical earthquake that ruptured the sub‐lacustrine Iznik Fault produced at least three different types of event deposits. One deposit type (T2) is only observed for this very local earthquake, implying that the type of event deposit might also depend on ground‐motion parameters. At the lake scale, the occurrence of various event deposits depends on the flow distance from the source of sediment destabilisations to the coring site.

Abstract The lake‐basin‐type model classified the stratigraphic record of ancient lake systems according to rates of potential accommodation relative to sediment + water supply. The model convolved all modes and paths of water supply (direct fall, surficial, subsurface) with amounts and types of sediment supply (clastic, biogenic, chemical) into a single basin‐filling volume term (sediment + water); its major strength was its widespread applicability. This was supported by subsequent investigations confirming the utility of this approach, but it also revealed some important limitations due to simplifications in the original model. The model has been expanded here to address all inland waters (lakes, ponds, wetlands, playas) as well as adding two major subdivisions of the sediment + water term: (1) water supply paths and (2) the volume of water supply relative to sediment supply. Water supply flow paths in the subsurface are subdivided into ‘throughflow’, ‘recharge’ and ‘discharge’. Each of these groundwater hydrology states can be defined quite precisely by the ratio of net outflow to inflow, from persistently open to consistently closed. These paths can be deciphered using stable carbonate and oxygen isotope composition of primary lacustrine limestones, detailed sedimentology, stratigraphy, palaeontology and mineralogy. Distinguishing water supply paths provides additional insights into playa systems and the occurrence and character of evaporites and carbonates. The volume ratio of water to sediment supply most directly influences the water depths of lakes, ponds and wetlands, which affect water body hydrodynamics and ecosystem behaviour as well as the details of stratal stacking and depositional sequences. It helps fine‐tune estimates of the distribution of sediment texture, bedding, composition and organic matter content. The aim of this contribution is to address questions about the fundamental types of inland water bodies and to explain the new lake‐basin subtypes and provide examples that illustrate their potential to enable higher‐resolution, robust analysis of inland water systems and their stratigraphic records.

Abstract Downbursts are severe wind systems originating from thunderstorm clouds, and their strong horizontal outflows can pose serious hazards to natural and built environments. In the context of the activities of the European project THUNDERR—Detection, simulation, modelling and loading of thunderstorm outflows to design wind‐safer and cost‐efficient structures—a comprehensive database of full‐scale downburst measurements was built. All records were acquired by bi‐ or tri‐axial ultrasonic anemometers installed in the main ports of the High Tyrrhenian Sea, namely Genova, Livorno and La Spezia, within the European projects ‘Wind and Ports’ and ‘Wind, Ports and Sea’. The very limited space and time structure of downburst outflows makes the available records in nature inadequate for developing models that could be used in the atmospheric science and engineering communities. The database described herein represents a step forward in attempting to fill this gap. The downburst nature of all events contained in the dataset was verified through detailed meteorological analyses, including comparisons with radar and satellite images and lightning recordings. The wind speed records associated with the events detected by the anemometric network are made publicly available through the online repository Zenodo and can be reused for multiple purposes. The dataset is expected to convey an important impulse towards the physical characterization and modelling of downburst winds and their codification into design tools for the assessment of wind loading and its effects on structures and infrastructure. Furthermore, it could serve as a promising, essential tool for researchers and risk‐related insurance companies.

Abstract Maritime historical documentary sources of weather and state of sea surface including sea ice can aid in filling a known climate knowledge gap for the Southern Ocean and Antarctica for the first half of the 20th century. This study presents a data set of marine climate, sea ice and icebergs recovered from a collection of logbooks from mainly Norwegian whaling factory ships that operated in the Southern Ocean during 1929–1940. The data set comprises some 8000 weather and 4000 sea ice/open sea records from austral summers of the study period. This paper further discusses the structure and content of most common Norwegian maritime documentary sources of the period along with the practices of logging information relevant for the study, such as time keeping, positioning and making weather observations. An emphasis was made on recovery of notes on sea ice and icebergs and their interpretation in terms of WMO categories of sea ice concentration. Data, including ship‐related metadata from all individual documents are homogenized and structured to a common machine‐readable format that simplifies its ingestion into relevant climate data depositories.

Abstract Although the Carpathian Mts. area is considered as extremely prone to surface erosion which results in capacity loss of the dammed reservoirs, a lack of data to follow details of this process is perceivable. The research of the selected sediment fractions transport tracking was conducted using the capabilities of the digital platform—Macromodel DNS (Discharge‐Nutrient‐Sea) for the catchment with drinking water reservoir in the Polish part of Western Carpathian. The continuity of sediment transport simulation in two hydrologically different elements of the catchment—the river and the reservoir—was possible due to consolidation of two models in the platform—SWAT (Soil & Water Assessment Tool) and AdH/PTM (Adaptive Hydraulics Model/Particle Tracking Model). The result of those modules' integration was a database for tracking the individual sediment fractions delivered to the reservoir and deposited in specific reservoir zones. The implementation of climate and land use change scenarios allowed additionally to analyse the estimation of those processes in the future. The simulation outcomes consist of daily flows and monthly sediment loads at the reservoir inflow and the individual sediment particle fractions deposition location inside of the reservoir.

Abstract The Qinling‐Dabie‐Sulu orogen is the eastern part of the Central China Orogenic Belt. Looking back on previous studies of the sedimentary record we systematically compiled the dataset of detrital zircon U–Pb ages and Hf isotopes for this orogenic belt. The dataset incorporates a comprehensive compilation of 32,449 detrital zircon U–Pb ages and 979 Hf isotopes. The findings demonstrate that distinct tectonic units within the orogenic belt exhibit unique tectonic evolution histories during various geological epochs. This dataset can be used to constrain the tectonic framework and orogenic evolution including ocean subduction, continental collision and orogen exhumation. It can be integrated with other geological datasets to improve our understanding of the Central Orogenic Belt in China, and possibly plate tectonics globally.

Abstract This article describes a novel dataset on non‐diamondiferous eclogite and garnet pyroxenite xenoliths from four kimberlite pipes of the Ekati Diamond Mine (Central Slave Craton, Canada). Xenoliths brought to the surface by kimberlite eruptions are direct sources of information on the composition and evolution of the Earth's mantle. Eclogite and garnet pyroxenite xenoliths, specifically, are testimony of subduction into, and metasomatism of, the mantle beneath cratons. Furthermore, these rocks are major hosts for diamond and thus an important part of the deep carbon cycle. The sample suite consists of 41 small xenoliths (2–5 cm) recovered from drill cores. The dataset includes major and trace element concentrations for garnet, clinopyroxene and ilmenite, as well as stable oxygen isotope compositions of garnets. Strontium and neodymium isotopic compositions are reported for garnet and clinopyroxene for four samples which were large enough to allow for analysis. Overall, this dataset significantly expands and complements existing datasets on diamondiferous and non‐diamondiferous xenoliths from the Slave Craton in Canada, furthering our understanding of the composition of the Slave subcratonic lithosphere. The dataset includes several samples with rare mineral assemblages, including an olivine‐bearing eclogite as well as ilmenite and apatite‐bearing garnet‐pyroxenites, and thus provides data shedding light on rarely reported compositional nuances in xenolith suites found in kimberlites.

Abstract Geomorphic environments play a crucial role in influencing the preservation and characteristics of tsunami deposits. This paper introduces a global database of tsunami deposits, encompassing information on deposit locations, thematic data such as geomorphic environments and proxies and bibliographic details. Additionally, the database features maps incorporating environmental parameters and the precise locations of tsunami deposits. The primary utility of this database lies in assessing progress and identifying gaps in knowledge. It also involves analysing the relationship between environmental parameters and interpreting areas with varying probabilities of tsunami deposit preservation. The files are readily compatible with GIS software and can seamlessly integrate into spatial databases associated with tsunamis or other hazards. This contributes significantly to disaster risk management, enhancing preparedness and response efforts by providing a comprehensive historical dataset on tsunamis. Future applications of the database include the incorporation of modern deposits, boulders and new data from paleotsunami and historical studies. By enhancing data with thematic information, such as dating techniques and creating timelines, the database facilitates a more comprehensive understanding. The correlation between geomorphic environments and proxies aids in selecting sampling sites and identifying suitable proxies for analysis. Encouraging an open‐access approach, this database invites all interested researchers to include and modify additional information. The information compiled for this database serves multiple purposes: (1) assessing the global distribution of tsunami deposits; (2) identifying knowledge gaps in tsunami deposits; (3) guiding the selection of study areas for further research and finally; (4) enabling a meta‐analysis of the information gathered.

Abstract Detrital zircon U–Pb chronology database of Precambrian deposits provides a context for the interpretation of the origin and evolution of ancient crust. Here, we tried to summarize the published literature containing detrital zircon U–Pb ages and Hf isotope data of Precambrian deposits in South China and then established a database, which contains details of information, such as reference, sample ID, locality, rock type, research institution, GPS coordinates, U–Pb ages and εHf(t) values. The data statistics of this paper rely on the OneSediment Working Group of The Deep‐time Digital Earth program (DDE). By November 2022, 610 samples with 38,278 U–Pb ages and 8,798 Lu‐Hf isotope data were collected from 136 papers, and these data can be downloaded from DDE Data Publish & Repository website, https://repository.deep‐time.org/. The purpose of the establishment of the dataset is to provide guidance and convenience for the research direction of future generations in South China and to improve the previous studies through the integrated data to avoid the waste of resources caused by a large number of repeated studies.

Abstract Source‐to‐sink analysis examines the effects of source areas and basin (sink) dynamics on the generation, transport, composition, distribution and deposition of sediment in modern and ancient sedimentary systems. Detrital zircon, as one of the most stable detrital minerals, its U–Pb geochronology and geochemistry is pivotal for sedimentary provenance analysis and reconstructing palaeogeography. The South China Sea (SCS), as the largest marginal sea in the Southeast Asia, is closely related to the uplift of the Tibetan Plateau and the evolution of Chinese rivers. In this study, we mainly collect published detrital zircon of Cenozoic sediments in the SCS (include Hainan and Taiwan Islands). These detrital zircon were concentrated on Cenozoic multiple episodic rift basins in the northern part of the SCS. A total of 21,760 detrital zircon U–Pb data from 293 samples and 995 detrital zircon Lu‐Hf isotope data from 22 samples were collected in this dataset, with the main study epochs being the Palaeogene and Neogene. Best ages of these grains are range from 4,691 to 10 Ma and more than half of them within age less than 500 Ma. The 176Hf/177Hf ratios of the SCS samples ranging from 0.280509 to 0.28306 and the εHf(t) values from −63.8 to 24.6. The main age group of the SCS Cenozoic sediments were at 130–95 Ma, 175–130 Ma and 265–230 Ma. The detrital zircon U–Pb age and Lu–Hf isotope data contained in this dataset is an important geological record of the sedimentary and tectonic evolution of the SCS and the evolution of rivers such as the ancient Pearl River and the ancient Red River, which can provide a basis and important clues or exploring the source of sediments in the SCS, the dynamical processes of basin evolution, the evolution of the coastal drainage system and the tectonic uplift of the Tibetan Plateau.

Abstract The transboundary Arun River Basin (ARB) spreads across Nepal and Tibet. Nearly 95% of the basin lies in Tibet through which the Pumqu River flows, forming the Arun River once it enters Nepal. The ARB has five large hydropower projects undergoing construction or planned for the future. Rainfall and earthquake‐induced landslides, landslide‐dammed lakes and landslide‐induced glacial lake outburst floods pose major risks to smooth operation of these projects. To safeguard upcoming hydropower projects, areas susceptible to landslides in the ARB must be identified. We used high‐resolution satellite imagery and open‐source tools to generate a multitemporal landslide inventory for the basin. The rigorously quality‐controlled inventory represents a yearly record of landslides from 2011 to 2020. A data‐driven approach was used to map areas susceptible to landslides within the ARB. The multitemporal landslide inventory combined with other readily available Earth observation‐based variables was used to create a landslide susceptibility map. The susceptibility analysis provides a valuable initial estimate of where landslides are likely to initiate. These landslide products could form the basis of more comprehensive local studies to inform hydropower project development.

Abstract The Standardized Precipitation Evapotranspiration Index (SPEI) is a widely recognized and effective tool for monitoring meteorological droughts. However, existing SPEI datasets suffer from spatial discontinuity or coarse spatial resolution problems, which limits their applications at the local level for drought monitoring research. Therefore, we calculated the SPEI index at meteorological stations, combined with the Global Precipitation Measurement (GPM) Precipitation (Pre), Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature (LST), ERA5‐Land Shortwave Radiation (SR), Shuttle Radar Topography Mission (SRTM) Digital Elevation Model (DEM) datasets and Random Forest Regression (RFR) model, developed a high spatial resolution (1 km) SPEI (HSPEI) datasets with multiple time scales in mainland China from 2001 to 2022. Compared to other SPEI datasets, the HSPEI datasets have higher spatial resolution and can effectively identify the detailed characteristics of drought in mainland China from 2001 to 2022. Overall, the HSPEI datasets can be effectively applied to the research of different droughts in China from 2001 to 2022.

Abstract High‐resolution climate projections are valuable resources for understanding the regional impacts of climate change and developing appropriate adaptation/mitigation strategies. In this study, we developed a 10‐km gridded hydrometeorological dataset over India by dynamic downscaling of the bias‐corrected Community Earth System Model (CESMv1) climate projections under RCP8.5 scenario using the state‐of‐the‐art Weather Research and Forecasting (WRF) model. The downscaled CESM dataset (DSCESM) is archived in the World Data Center for Climate (WDCC) portal at three temporal resolutions (daily, monthly and monthly climatology) for current (2006–2015), mid‐century (2041–2050) and end‐century (2091–2100) periods. The dataset includes 2‐m air temperature, total accumulated precipitation, wind speed, relative humidity, sensible and latent heat fluxes, along with surface shortwave and outgoing longwave radiation. All the DSCESM variables were evaluated against reanalysis data and station observations for the period 2006–2015. This dataset can help us quantitatively understand regional climate change in India. It can also be used in conjunction with agricultural, hydrological, fire and other application models for climate change impact assessment on various sectors to help develop effective adaptation/mitigation strategies.

Abstract We installed a meteorological recording system at Badwater (elev. −75 m), the lowest point in Death Valley, California and recorded data over the period 1998–2019. A second station (the Outhouse Station) was established nearby from 2014 to 2019. Here, we report on and publicly archive the data from these two stations. Of interest was the comparison between two air temperature measurements at the Badwater Station, the first with an aspirated platinum resistance temperature device and the second with a thermistor probe in a passive sun shield. During the hottest periods of the summer when temperatures were typically between 30°C at night and 50°C daily peak, the passively shielded sensor indicated up to 0.5°C warmer than the aspirated temperature sensor due to radiative effects. The data suggest a correction for radiative heating of (T–35)/30, for T > 35°C, where, T, is the uncorrected temperature reading of a passively shielded sensor subtracted after any calibration at lower temperatures. Our station was the first precision temperature measurements at Badwater. A longer record exists for the reporting station near the visitor's centre at the Furnace Creek. The summer temperature maxima at the Badwater site correlate well with the values the same day from the Furnace Creek site. The daily maximum temperatures in winter at the Badwater site appear to be about 1°C lower than at the Furnace Creek site. The largest differences are in the minimum temperatures for which the Badwater site averages about 2–3°C warmer than the Furnace Creek site.

Abstract Improvements in analytical technique and data processing lead to a large deposit of detrital zircon U–Pb and Hf isotopic data in published journal articles, thesis and reports. With the support of Deep‐time Digital Earth Big Science Program, OneSediment Project conducted a team‐working effort to assemble the detrital zircon U–Pb and Hf isotopic data for mainland China and adjacent regions. Entity‐relationship diagram was constructed for detrital zircon data to determine what information need to be collected. Researchers and students from 13 institutions were organized together to fulfil this task and generated 13 detrital zircon datasets. The assembled datasets totally include 6635 samples and 560,596 analyses. The samples were checked in terms of lithology and stratigraphy according to the latest stratigraphic framework. Collected detrital zircon U–Pb and Hf isotopic data were recalculated for the best U–Pb age and εHf(t) values. They can be used to track crustal growth, tectonic evolution, provenance analysis and palaeogeographical change in regional and, when combined with other dataset, global scales.

Abstract In the case of modern river sediments, source rocks, tectonic setting, and climatic and geomorphological conditions are fully known, diagenetic effects are by definition none, and physical and chemical processes during erosion, transport, and deposition can be investigated directly in any required detail. Their study thus provides the fundamental information needed to understand the impact of various controls on sediment generation and sediment routing systems in diverse geological settings. With the growing interest in source‐to‐sink sedimentary systems for economic purposes, researchers have focused more and more on modern environments, producing an ever‐increasing amount of compositional data on river sediments. To better integrate and utilize these large datasets, we systematically compiled a global database of 4,208 fluvial sediment samples compiled from 100 published papers, book chapters, and dissertations and included 3,747 petrographic and 1,943 heavy‐mineral analyses. The analysed samples are mostly located in Asia, Africa, Europe, and South America, with fewer examples from North America and Oceania. Each sample is complemented by metadata describing references, river name, geographic location, sampling date, analytical method, and grain size, so that samples can be grouped and filtered to meet different needs including comparison with other datasets.

Abstract For more than three decades, satellite altimetry has provided valuable measurement data for the monitoring and analysis of ocean and inland water surfaces. Since 1992, there have always been at least two simultaneous missions providing continuous measurement data, starting with TOPEX/Poseidon and ERS‐1 in the early 1990s and continuing with about 10 satellites active today, including ICESat‐2, Sentinel‐6A and SWOT. Most mission data are freely available, but in different formats, processing levels and with respect to different references (e.g. ellipsoid or time), making common multi‐mission applications difficult. In addition, the derivation of ready‐to‐use and high‐quality scientific products requires expertise that not every user is willing to acquire. Over the years, DGFI‐TUM has developed and maintained an Open Altimeter Database (OpenADB) that allows consistent data management and combination. It consists of the internal Multi‐Version Altimetry (MVA) data repository and the OpenADB web portal. OpenADB provides user‐friendly access to derived along‐track products, such as sea surface heights and ocean tides. It also provides general information about the satellite altimetry missions, their observing configurations and about the data provided in the database. All products are freely available on the OpenADB web portal (https://openadb.dgfi.tum.de) after registration.

Abstract The seismic‐electromagnetic phenomenon entails the generation of transient electromagnetic signals, which can be observed both simultaneously (co‐seismic) and preceding (pre‐seismic) a seismic wave arrival. Following the most accredited hypothesis, these signals are mainly due to electrokinetic effects, generated on microscopic scale in porous media containing electrolytic fluids. Thus, the seismic‐electromagnetic signals are expected to be suitable for the detection and tracking of crustal fluids. Despite the growing interest in this phenomenon, there is a lack of freely available observational database of earthquake‐related electromagnetic signals recorded at co‐located seismic and magnetotelluric stations. To fill this gap, we set up two multicomponent monitoring stations in two seismically active areas of Southern Italy: the Gargano Promontory and the High Agri Valley. This work is both aimed to systematically analyse earthquake‐generated seismic‐electromagnetic recordings and to make the collected database accessible to the scientific community.

Abstract Historical weather records from Europe indicate that the Earth experienced substantial climate variability, which caused, for instance, the Little Ice Age and the global crisis in the period between the 14th and 19th centuries. However, it is still unclear how global this climate variability was because of the scarce meteorological data availability in other regions including East Asia, especially around the 17th century. In this context, Seungjeongwon Ilgi, a daily record of the Royal Secretariat of the Joseon Dynasty of Korea, is a precious source of historical meteorological records for the Korean Peninsula, as it covers 288 years of weather observations made during 1623–1910. We used the digital database of Seungjeongwon Ilgi to construct a machine‐readable weather condition dataset. To this end, we extracted valid weather information from the original weather description text and compiled them into pre‐defined weather categories. Additionally, we attempted to improve the usability of dataset by converting the reported dates in the traditional calendar system to those in the Gregorian calendar. Finally, we outlined promising implications of this dataset for meteorological and climatological studies, while describing the limitations of the dataset. Overall, future studies focusing on the climate and weather of the past could use this meteorological database for investigating long‐term climate variability. Our datasets are publicly available at 10.5281/zenodo.8382243.

Abstract We describe the transcription and quality control processes for rescuing around 570,000 sub‐daily and daily weather observations which were recorded in the UK Met Office Daily Weather Reports during the 1861–1875 period. These data are from the start of coordinated weather observations and were collected with the aim of making the first‐ever weather forecasts. The observations were rescued thanks to 3500 volunteers and include sub‐daily sea‐level pressure, dry and wet bulb temperatures, daily maximum and minimum temperatures, and daily rainfall amounts from 70 different locations across Western Europe, and one in Canada. We highlight how these observations will be used to fill gaps in existing pressure and temperature datasets and use two case studies to show how the pressure observations will likely better constrain the atmospheric circulation during two severe storms. We also compare a sub‐sample of the newly rescued observations with data that were previously digitized for a small number of locations for the same dates, finding good agreement in general, although some discrepancies remain.

Abstract U–Pb dating of detrital zircon is widely used in geology to identify the source of sediments and constrain palaeogeography and tectonic history. We collected the detrital zircon from the Paleoproterozoic to early Palaeozoic strata to understand the North China Craton's geological chronological characteristics. After screening and sorting out data information, we managed and analysed 84 papers from 2006 to 2022. Three hundred seventy‐nine samples comprising 29,431 pieces of U–Pb ages of detrital zircons gathered from the Proterozoic to Ordovician sedimentary rocks in North China Craton (NCC). Detrital zircons within five areas in the NCC, i. e., Xuhuai Basin, Zhaertai‐Bayan Obo‐Huade Basin, Yanliao Basin, Xiong'er Basin and Alxa Block, are discussed in detail. Meanwhile, we collected 2,588 pieces of Lu‐Hf detrital zircon data in the study. This Database can be helpful in understanding and explaining the tectonic evolution of the NCC from the Paleoproterozoic to the Early Palaeozoic.

Abstract Complications of detrital zircons databases provide a means for statistically analysing a variety of significant geological problems. In this work, we tried to collect a database about the South China Phanerozoic detrital zircon geochronology data. The data statistics of this paper rely on the OneSediment Working Group of The Deep‐time Digital Earth program (DDE). By November 2022, the database contains a total of 699 samples with 55,532 U–Pb ages and 3,770 effective Hf isotope data, from 130 papers. Abundant information including reference title, sample ID, locality, rock type, research institution, GPS coordinates, U–Pb ages, εHf(t) values, etc., have been involved in our database, and all data can be downloaded from DDE Data Publish & Repository website, https://repository.deep‐time.org/. Through the integrated data, we can improve the previous studies and avoid the waste of resources caused by a large number of repeated studies.

Abstract Phenology reflects the life cycle of vegetation, crucial for monitoring global vegetation diversity, ecosystem stability, and agricultural security. However, there is currently no dataset related to phenology. The 24 solar terms (24STs), based on the Sun's annual motion, reflect the changing seasons, temperature fluctuations, and phenological phenomena. They serve as a vital means to characterize vegetation phenology. This study generate a global Normalized Difference Vegetation Index (NDVI) product based on 24STs using Moderate Resolution Imaging Spectroradiometer (MODIS) on the Google Earth Engine (GEE). The 24STs NDVI dataset adopted the maximum value compositing (MVC) to process the NDVI values between two adjacent 24STs. The product has a spatial resolution of 250 m, covering the period from 2001 to 2022. Comparing with the MOD13Q1, good spatiotemporal consistency between the two datasets was observed, confirming the reliability of the 24STs product. However, the 24STs product holds distinct phenological meanings. This product introduces, for the first time, a vegetation index dataset based on the 24STs, enriching the vegetation index dataset and facilitating further research on phenology.

Abstract Analysis of hydro‐climatological time series and spatiotemporal dynamics of meteorological variables has become critical in the context of climate change, especially in Southern African countries where rain‐fed agriculture is predominant. In this work, we compared modern unsupervised time series and segmentation approaches and commonly used time series models to analyse rainfall regime changes in the coastal, sub‐humid and semi‐arid regions of Southern Africa. Rainfall regimes change modelling and prediction inform farming strategies especially when choosing measures for mixed crop–livestock farming systems, as farmers can decide to do rainwater harvesting and moisture conservation or supplementary irrigation if water resources are available. The main goal of this study was to predict/identify rainfall cluster trends over time using regression with hidden logistic process (RHLP) or hidden Markov model regression (HMMR) supplemented by autoregressive integrated moving average (ARIMA) and Facebook Prophet models. Historical time series rainfall data was sourced from meteorological services departments for selected site over an average period of 55 years. Commonly used approaches forecasted an upward rainfall trend in the coastal and sub‐humid regions and a declining trend in semi‐arid areas with high variability between and within seasons. For all sites, Ljung‐Box Test Statistics suggested the existence of autocorrelation in rainfall time series data. Prediction capabilities were investigated using the root mean square error (RMSE), mean absolute error (MAE) and mean absolute percentage error (MAPE) which indicated not much difference between ARIMA and Facebook Prophet models. RHLP and HMMR offered a unique clustering and segmentation approach examining between and within‐season rainfall variability. A maximum of 20 unique rainfall clusters with similar trend characteristics were determined as going beyond this brought non‐significant difference to regime changes. A clear trend was exhibited from 1980 going backwards as compared to recent years signifying how unpredictable is rainfall in Southern Africa. The unsupervised approaches predicted a clear cluster trend in coastal than in sub‐humid and semi‐arid and the performance was assessed using Akaike information criteria and log‐likelihood which showed improvement in prediction power as the number of segmentation clusters approaches 20.

Abstract To prepare for a hotter future, information on intra‐urban temperature distributions is crucial for cities worldwide. In recent years, different methods to compute high‐resolution temperature datasets have been developed. Such datasets commonly originate from downscaling techniques, which are applied to enhance the spatial resolution of existing data. In this study, we present an approach based on a fine‐scaled low‐cost urban temperature measurement network and a formerly developed land use regression approach. The dataset covers mean nocturnal temperatures of 16 summers (2007–2022) of a medium‐sized urban area with adapted land cover data for each year. It has a high spatial (50 m) and temporal (daily) resolution and performs well in validation (RMSEs of 0.70 and 0.69 K and mean biases of +0.41 and −0.19 K for two validation years). The dataset can be used to examine very detailed statistics in space and time, such as first heatwave per year, cumulative heat risks or inter‐annual variability. Here, we evaluate the dataset with two application cases regarding urban planning and heat risk assessment, which are of high interest for both researchers and practitioners. Due to potential biases of the low‐cost measurement devices during daytime, the dataset is currently limited to night‐time temperatures. With minor adaptions, the presented approach is transferable to cities worldwide in order to set a basis for researchers, city administrations and private stakeholders to address their heat mitigation and adaptation strategies.

Abstract Quaternary unconsolidated sediments are pronouncedly widespread features on the planetary surface, documenting significant geological signals of earth surface processes, climate change and biogeochemical cycles. The extensive unconsolidated deposits play a vital role in natural hazards and Anthropogenic activities, especially in alpine regions where massive unconsolidated materials are produced. However, the spatial distribution and total volume of unconsolidated sediments across the Yarlung Tsangpo River Basin (YTRB) remain largely unknown due to the limitation of traditional field surveys and on‐site measurements as well as the complex landscape in the remote area. This study presents the datasets for the systematic distribution and spatial accumulation of unconsolidated sediments across the Yarlung Tsangpo River Basin, southern Tibet. Combining remotely sensed data with numerous field investigations, an integrated method based on image processing and kriging interpolation‐pixel integration was performed to semi‐automatically classify and quantify the unconsolidated sediments. Eleven categories of sediments were mapped and their total accumulation is estimated at approximately 4.97 × 1011 t. Ultimately, 17 groups of classification and thickness maps were derived, revealing the distribution and volume of unconsolidated and Quaternary sediments. The datasets fill the gaps in comprehensive investigations of unconsolidated sediments for YTRB, and provide a fundamental database to support the scientific understanding of potential linkages between the distribution of unconsolidated sediments with environmental changes and human activities.

Abstract This paper introduces a community‐accessible dataset comprising daily hydroclimatic variables (precipitation, temperature, and streamflow) observed in 50 catchments in Sweden (median size of 1019 km2). The dataset covers a 60‐year period (1961–2020) and includes information on geographical location, landcover, soil classes, hydrologic signatures, and regulation for each catchment. Data were collected from various sources, such as the Swedish Meteorological and Hydrological Institute, the Swedish Geological Survey, and several Copernicus products provided by the European Environment Agency. The compiled, spatially‐matched, and processed data are publicly available online through the Swedish National Data Service (https://snd.se/en), contributing a new region to the collection of existing CAMELS (Catchment Attributes and Meteorology for Large‐sample Studies) datasets. The CAMELS‐SE dataset spans a wide range of hydroclimatic, topographic, and environmental catchment properties, making it a valuable resource for researchers and practitioners to study hydrological processes, climate dynamics, environmental impacts, and sustainable water management strategies in Nordic regions.

Abstract Climate change no longer involves and affects just a few people or communities. However, most of them need climate change detection studies to adapt to the current and future climate conditions efficiently. The present research aimed to detect climate changes by considering the shift in climate conditions from one region to another over different periods based on a similarity index in the Carpathians basin using the new ClimShift toolbox, specially created for this purpose. Developed in R, based on the cosine similarity index and using a set of 32 climate indices (temperature and precipitation), ClimShift uses NC raster format (NetCDF files) as input data. The application is compatible with Microsoft and Unix/Linux environments. The toolbox allows the detection of forward and backward climate shifts. The results can be employed as a Climate Service and are extremely helpful for an efficient process of adaption to climate changes at a local/regional scale. A user‐friendly interface and a tutorial on how to use the toolbox are also available. The toolbox was tested for four locations in the Carpathians Basin (Vienna, Bekes, Cluj‐Napoca and Kosice) using 1961–1990 as a base period and 1991–2021 as an analysis period for the forward climate shift analysis. For Cluj‐Napoca, the application was also tested for the backward climate shift, using 1991–2021 as the base period and 1961–1990 as the analysis period, identifying the region where present climate conditions were specific during the older period. The scientific results indicated a significant shift towards the east and northeast from the older period to the most recent one and a low percentage (6%–10%) in the overlapping area with highly similar conditions between the two periods.

Abstract Lack of a long‐term time series of dataset with a high spatiotemporal resolution at a global scale poses a great challenge to clarify the characteristics of DOC in space and depth, and its trend in time. Thus, there is an urgent need for the development of a global DOC gridded dataset in space, time and depth. The Biogeochemical Argo (BGC‐Argo) provides an important data source for obtaining global DOC, but is limited by irregular spatial sampling locations. Besides, BGC‐Argo has shorter time series coverage and fewer profiles compared to Core‐Argo. Thus, this manuscript aims at reconstructing the DOC profiles based on the Core‐Argo and BGC‐Argo profiles and then developing a spatial, temporal and depth‐specific gridded DOC dataset, named G4D‐DOC. Validation results demonstrate that G4D‐DOC has a good overall consistency with WOA18 and GLODAPv2 datasets, particularly at depths of 10 dbar and 1000 dbar, where it surpasses consistency at other standard depths. In addition, compared to WOA18, G4D‐DOC has achieved a breakthrough in a temporal resolution from a climatological monthly to monthly, and compared to GLODAPv2, G4D‐DOC has achieved a breakthrough in space from irregular discrete locations to regular grids. Further, G4D‐DOC can be widely used to conduct the characteristics of DOC in space and depth and its trends at global and regional scales. The metadata of G4D‐DOC is as follows: four dimensions mean two dimensions in space (longitude and latitude), one in time and one in depth; data format is standard Hierarchical Data Format Version 4 (HDF4) with a spatial resolution of 1 degree and temporal resolutions of annual, seasonal and monthly intervals at 26 standard layers above 2000 dbar in depth; the spatial coverage is global and the time period is from 2005 to 2022.

Abstract The majority of available climate data in global digital archives consist of data only from the 1940s or 1950s onwards, and many of these series have gaps and/or are available for only a subset of the variables which were actually observed. However, there exist billions of historical weather observations from the 1700s, 1800s, and early 1900s that are still in hard‐copy form and are at risk of being lost forever due to deterioration. An assessment of changes in climate extremes in several IPCC regions was not possible in IPCC AR6 WGI owing, in many cases, to the lack of available data. One such region is Africa, where the climate impact research and the ability to predict climate change impacts are hindered by the paucity of access to consistent good‐quality historical observational data. The aim of this innovative project was to use classroom‐based participatory learning to help transcribe some of the many meteorological observations from Africa that are thus far unavailable to researchers. This project transcribed quickly and effectively station series by enrolling the help of second‐year undergraduate students at Maynooth University in Ireland. The newly digitized African data will increase the temporal and spatial coverage of data in this important data‐sparse region. Students gained new skills while helping the global scientific community unearth new insight into past African climate. The project managed to transcribe 79 months of data at Andapa in Madagascar and 56 months of data for Macenta in Guinea. The digitized data will be openly and freely shared with the scientific and wider community via the Pangaea data repository, the C3S Climate Data Store, and the National Oceanic and Atmospheric Administration's (NOAA) National Centers for Environmental Information (NCEI) data centre in the US. The project model has the potential for a broader roll‐out to other educational contexts and there is no shortage of data to be rescued. This paper provides details of the project, and all supporting information such as project guidelines and templates to enable other organizations to instigate similar programs.

Abstract The regional climate of New Zealand's South Island is shaped by the interaction of the Southern Hemisphere westerlies with the complex orography of the Southern Alps. Due to its isolated geographical setting in the south‐west Pacific, the influence of the surrounding oceans on the atmospheric circulation is strong. Therefore, variations in sea surface temperature (SST) impact various spatial and temporal scales and are statistically detectable down to temperature anomalies and glacier mass changes in the high mountains of the Southern Alps. To enable future studies on the processes that govern the link between large‐scale SST and local‐scale high‐mountain climate, we utilized dynamical downscaling with the Weather Research and Forecasting (WRF) model to produce a regional atmospheric modelling dataset for the South Island of New Zealand over a 16‐year period between 2005 and 2020. The 2 km horizontal resolution ensures realistic representation of high‐mountain topography and glaciers, as well as explicit simulation of convection. The dataset is extensively evaluated against observations, including weather station and satellite data, on both regional (in the inner domain) and local (on Brewster Glacier in the Southern Alps) scales. Variability in both atmospheric water content and near‐surface meteorological conditions is well captured, with minor seasonal and spatial biases. The local high‐mountain climate at Brewster Glacier, where land use and topographic model settings have been optimized, yields remarkable accuracy on both monthly and daily time scales. The data provide a valuable resource to researchers from various disciplines studying the local and regional impacts of climate variability on society, economies and ecosystems in New Zealand. The model output from the highest resolution model domain is available for download in daily temporal resolution from a public repository at the German Climate Computation Center (DKRZ) in Hamburg, Germany (Kropač et al., 2023; 16‐year WRF simulation for the Southern Alps of New Zealand, World Data Center for Climate (WDCC) at DKRZ [data set]. https://doi.org/10.26050/WDCC/NZ‐PROXY_16yrWRF).

Abstract The distribution of industrial heat sources (IHSs) is a crucial indicator for evaluating energy consumption and air pollution levels. However, there is a notable lack of IHS datasets in China that are frequently updated, span long periods, contain detailed characteristic information, have been individually validated and are publicly available. In this study, IHS datasets from China between 2012 and 2021 were constructed using the Visible Infrared Imaging Radiometer Suite (VIIRS) I Band 375 m NRT Active Fire/Hotspots (ACF) Product (VNP14IMGTDL_NRT) to monitor and analyse large‐scale IHSs. First, a density segmentation method based on an improved K‐means algorithm using ACF data and spatial topological correlation analysis was conducted to construct the IHS. Then, 4410 records covering China between 2012 and 2021, with 21 attributes, were obtained and verified, with an individual identification precision of 95.08% via manual verification based on high‐resolution remote‐sensing images and point of interest (POI) data. Finally, the trend of the spatiotemporal variation in IHSs was analysed using a long time series. The results showed that the spatial distribution of IHSs in China from 2012 to 2021 exhibited local aggregation and a gradual shift from east to west. In addition, the number of IHSs in China showed an initial increasing trend from 2012 to 2014, followed by a decrease since 2014, consistent with national energy reform‐related policies. The results of this study indicate the temporal variation in IHSs, enhance the precision of identifying fire location categories and demonstrate the potential for improving energy efficiency, reducing emissions and ensuring sustainable development in China.

Abstract Paleogeography is the merger of sediment and volcanic facies, depositional settings, tectonic plate movements, topography, climate patterns and ecosystems through time. The construction of paleogeographic maps on tectonic plate reconstruction models requires a team effort to compile databases, data sharing standards and map projection methods. Two goals of the Paleogeography Working Group of the International Union of Geological Sciences (IUGS) program for Deep‐Time Digital Earth (DDE) are: (1) to interlink online national lexicons for all sedimentary and volcanic formations, and develop online ones for nations that currently lack these; (2) to target specific regions and intervals for testing/showcasing paleogeography output from the merger of these databases. Following those goals, we developed and applied new cloud‐based lexicon data services and interactive visualization techniques to regions in East Asia. This has been a successful collaboration among computer engineers and plate modellers and has involved stratigraphers in India (ONGC), China (Chengdu Univ. Tech., and Chinese Acad. Geol. Sci.), United States (Paleomap Project, and Purdue Univ.), Australia (GPlates visualization team) and Vietnam (Vietnam Nat. Univ.). Independent online lexicons with map‐based and stratigraphy‐based user interfaces have been developed (as of the date of this submission in March 2022) for all Proterozoic to Quaternary formations on the Indian Plate (over 800) and Vietnam (over 200), the majority of the Devonian through Neogene of China (ca. 2000) and partially for Thailand. A multi‐database search system returns all geologic formations of a desired geologic time from these four independent databases. With one click, users can plot the regional extent of one or of all of those regional formations on different plate reconstruction models of that desired age, and these polygons are filled with the lithologic facies pattern.

Abstract Since the advent of detrital geochronology, significant progress has been made in the study of sedimentary sources. The detrital zircon U–Pb age spectrum, especially when combined with zircon Hf isotopes, provides a powerful tool for determining the provenance location, nature, and evolutionary history of sediments. The Western Qinling–Songpan tectonic junction, located in central China, is a giant structure on the crustal scale. A total of 20,640 zircon U–Pb ages of 281 sandstone samples from the Songpan–Ganzi and Western Qinling terranes were obtained. Among these, 1,636 zircons from 33 samples contained Hf isotopic data. Moreover, we compiled data on papers, samples, analytical methods, and results and obtained a total of 76 zircon U–Pb and 60 Hf isotope data heads. The obtained dataset has multiple data interfaces, which can be well associated with research or applications in different fields, for provenance analysis, climate change, and paleogeographic reconstruction studies.

Abstract Chert is a sedimentary rock abundant and conspicuous throughout the geologic record. It serves as an essential geological archive and is vital for palaeogeographic reconstruction. The Chert Database Working Group is part of the OneSediment Working Groups of the Deep‐time Digital Earth (DDE) Big Science Program. To facilitate the sharing of chert information and promote chert research, we have compiled a summary of literature containing chert information worldwide and established the Global Chert Database (GCDB). The main body of the current database consists of seven data tables, each providing details on references, lithology, depositional age, geographic location, depositional environment and geochemical information for each sample. As of December 2023, the GCDB contains 8417 sample data from 617 pieces of literature, which can be downloaded from the ‘DDE Data Publish & Repository’.

Abstract The construction of databases of detrital zircon is important for Earth science research. A total of 27,915 U–Pb ages and 4,968 Hf isotopic compositions of detrital zircons from the upper Paleozoic–Mesozoic strata of the North China Block were compiled from articles in the Web of Science and the China National Knowledge Infrastructure. This dataset yields five age groups, at 3.9–1.0 Ga, 1,000–540 Ma, 540–360 Ma, 360–240 Ma and 240–95 Ma. The 3.9–1.0 Ga group has two peaks at ~2.5 and ~ 1.85 Ga. The 1,000–540 Ma and 540–380 Ma groups have three peaks at ~920 Ma, 780–750 Ma and ~ 440 Ma. Detrital zircon grains with ages of 360–240 Ma have multiple age peaks at ~380, ~320, ~280 and ~250 Ma. The group with ages of 240–95 Ma yields four peak ages at ~220, ~180, ~160 and ~120 Ma. Corresponding εHf(t) values range from −81.3 to +41.9, with two‐stage Hf model ages (TDM2) of 4,335–204 Ma. This dataset provides a comprehensive and systematic archive of detrital zircon data for Paleozoic–Mesozoic successions in the North China Block, which can be used to track tectono‐sedimentary and crustal evolution. In using this dataset, two issues need to be considered. First, the number of detrital zircon analyses from each sample varies markedly, which may influence the interpretation of the dataset. Second, there may be large uncertainties in the stratigraphic ages assigned to the samples.

Abstract In this article, we present a brief introduction to the procedure, methods and results of the collection and summarization of an updated detrital zircon U–Pb geochronology database for the Qilian‐Qaidam‐Kunlun collage in northern Tibet. A total of 620 samples with 59,830 raw data were compiled from 121 published papers, including 70 samples with in‐situ detrital zircon Lu–Hf isotopes. Samples from seven different geologic subunits are categorized. For sediments with different ages of deposition, we highlight the characteristics of age spans, probability density distributions, major peaks and εHf(t) values. Further syntheses of this metadata collection, the detailed raw data of which will be periodically accessible in the Deep‐Time Digital Earth repository, would be effectively applied to a variety of scientific attempts concerning the geologic history of the Qilian‐Qaidam‐Kunlun collage, in particular, provenance analyses, crustal evolution studies and supercontinent reconstructions.