Search

Whereas synthetic biodegradable polymers have been successfully applied for the delivery of biologics in other tissues, the anatomical complexity, poor blood supply, and reduced clearance of degradation byproducts in the rotator cuff create unique design challenges for implantable biomaterials. Here, we investigated lower molecular weight poly-lactic acid co-epsilon-caprolactone (PLA-CL) formulations with varying molecular weight and film casting concentrations as potential matrices for the therapeutic delivery of biologics in the rotator cuff. Matrices were fabricated with target footprint dimensions to facilitate controlled and protected release of model biologic (Bovine Serum Albumin), and anatomically-unhindered implantation under the acromion in a rodent model of acute rotator cuff repair. The matrix obtained from the highest polymeric-film casting concentration showed a controlled release of model biologics payload. The tested matrices rapidly degraded during the initial 4 weeks due to preferential hydrolysis of the lactide-rich regions within the polymer, and subsequently maintained a stable molecular weight due to the emergence of highly-crystalline caprolactone-rich regions. pH evaluation in the interior of the matrix showed minimal change signifying lesser accumulation of acidic degradation byproducts than seen in other bulk-degrading polymers, and maintenance of conformational stability of the model biologic payload. The context-dependent biocompatibility evaluation in a rodent model of acute rotator cuff repair showed matrix remodeling without eliciting excessive inflammatory reaction and is anticipated to completely degrade within 6 months. The engineered PLA-CL matrices offer unique advantages in controlled and protected biologic delivery, non-toxic biodegradation, and biocompatibility overcoming several limitations of commonly-used biodegradable polyesters.

A biocompatible and biodegradable scaffold with load-bearing ability is required to enhance the repair of bone defects by facilitating the attachment, and proliferation of cells, and vascularization during new bone formation. However, it is challenging to maintain the porosity and biodegradability, as well as mechanical properties (especially compressive strength), at the same time. Therefore, in the present work, a biodegradable composite structure of poly(caprolactone) (PCL) was designed using compression molding with varying amounts of poly(glycolic acid) (PGA) (25, 50, 75 wt%) and fixed amount (20 wt%) of beta tricalcium phosphate (beta TCP). It was hypothesized that the fabricated composite structure will develop porosity during the degradation of the PGA and that the corresponding decrease in mechanical properties will be compensated by new bone formation and ingrowth, in vivo. Accordingly, we have systematically studied the effects of sample composition on time-dependent dissolution and mechanical properties of the PGA/beta TCP scaffolds. The compressive strength increased up to ~92 MPa at 50% compression of the designed PCL-PGA samples. Furthermore, the dissolution rate, as well as weight loss, was observed to increase with an increase in the PGA amount in PCL. Based on the mechanical properties and dissolution data, it is concluded that the PCL-PGA scaffolds with beta TCP can be suitable candidates for bone tissue engineering applications, specifically for the reconstruction of bone defects, where strength and biodegradation are both important characteristics.

Scaffolds used for soft tissue regeneration are designed to mimic the native extracellular matrix (ECM) structurally and provide adequate mechanical strength and degradation properties. Scaffold architecture, porosity, stiffness and presence of soluble factors have been shown to influence human mesenchymal stem cells (hMSCs) differentiation along neuronal lineage. The present manuscript evaluated the performance of a composite scaffold comprised of electrospun polycaprolactone (PCL) nanofiber lattice coated with sodium alginate (SA) for neural tissue engineering. The nanofiber lattice was included in the scaffold to provide tensile strength and retain suture thread on the nerve graft. Sodium alginate was used to control matrix hydrophilicity, material stiffness and controlled release of biological molecules. The effect of SA molecular weight on the composite scaffold tensile properties, hMSCs adhesion, proliferation and neurogenic differentiation was evaluated. Both random and aligned composite scaffolds showed significantly higher tensile properties as compared to PCL fiber matrix alone indicating the reinforcement of SA hydrogel into fiber lattice. Low molecular weight SA coating because of its low viscosity resulted in uniform penetration into the fiber lattice and resulted in significantly higher tensile strength as compared to high molecular weight SA. Both composite scaffolds showed a controlled SA erosion rate and lost >95% of the SA coating over a period of 10 days under in vitro conditions. Composite scaffolds showed progressive hMSCs growth over 14 days and resulted in significantly higher amount of DNA content (almost double on day 7 and 14) as compared to control PCL fiber matrices. Immunostaining experiments showed higher and uniform expression of the neurotropic protein S-100 on composite scaffolds containing low molecular weight SA. These composite scaffolds may be suitable for peripheral nerve regeneration. Copyright © 2015 John Wiley & Sons, Ltd.

Conductive polymers have found extensive application in fuel cells, sensors and more recently as scaffolds for tissueand organ regeneration. Scaffolds that can transmit electrical impulses have been shown to be beneficial inregeneration of tissues like muscle and nerve that are electroactive in nature. Most cellular events and cellfunctions are regulated by ion movement, and their imbalance is the cause of several diseases. We report synthesisand characterization of sulfonated polymers of poly(methyl vinyl ether-alt-maleic anhydride) (PMVEMA), poly(etherether ketone) (PEEK), poly(ether sulfone) (PES) and poly(phenylene oxide) (PPO) and evaluate their potential for tis-sue regeneration. The ionic conductive property stems from the presence of sulfonic groups on the polymer back-bone. The structure of the polymer was confirmed using Fourier Transform Infrared Spectroscopy and membranehydrophicity was determined by water contact angle measurement. The electrical conductivity of these sulfonatedmembranes was found to be 53.55, 35.39 and 29.51mS/cm for SPPO, SPEEK and SPMVEMA, respectively. Theconductivity was directly proportional to the sulfonic acid content on the polymer backbone. The ionic membranesnamely SPPO, SPEEK and SPMVEMA demonstrated superior cell adhesion properties (~7–10 fold higher) than cellsseeded onto tissue culture polystyrene. The sulfonated membranes exhibited static water contact angle in the rangeof 70–76°. The membranes supported the proliferation of human skin fibroblasts over 14days in culture asevidencedbyconfocaland electronmicroscopyimaging.Theionicmaterials reportedinthisstudymayserveasscaf-folds for a variety of tissue healing and drug delivery applications. Copyright © 2014 John Wiley & Sons, Ltd.Keywords: Electrically conducting polymers; Ionic conductance; Nerve regeneration; Muscle Regeneration; Biocompatibility

Polymers derived from plant (polysaccharides) and animal (proteins) kingdoms have been widely used for a variety of biomedical applications including drug delivery and tissue regeneration. These polymers due to their biochemical similarity with human extracellular matrix components are readily recognized and accepted by the body. Natural polymers inherit numerous advantages including natural abundance, relative ease of isolation, and room for chemical modification to meet varying technological needs. In addition, these polymers undergo enzymatic and/or hydrolytic degradation in biologic environments into non-toxic degradation byproducts. Polysaccharides (carbohydrates) are often isolated and purified from renewable sources including plants, animals, and microorganisms. Majority of these polymers are found in the extracellular matrix components of organisms and participate in inter and intracellular cell signaling and contribute to their growth. All these features offer polysaccharide-based biomaterials much desired biological recognition, biocompatibility, and bioactivity. In spite of many merits as biomaterials, these polysaccharides suffer from drawbacks including variations in material properties based on source, microbial contamination, uncontrolled water uptake, poor mechanical strength, and unpredictable degradation patterns. These inconsistencies have limited the usage of polysaccharides and biomedical application related technology development. Many of these polysaccharides have been chemically modified to achieve consistent physicochemical properties including mechanical stability, degradation, and bioactivity and processed into microparticles, hydrogels, and 3D porous structures for tissue regeneration applications. Presence of multiple functionalities on the polymer backbone allows easy structure modifications for the required application. The current article focuses on the application of polysaccharide-based materials in regenerative engineering and delivery. Copyright © 2014 John Wiley & Sons, Ltd.

A novel polymer poly(caprolactone triol succinate) (PPCLSu) was synthesized from monomers polycaprolactone triol and succinic acid by direct polycondensation. The tensile strength of PPCLSu was found to be 0.33 60.03 MPa with an elongation of 47.8 61.9%. These elastomers lost about 7% of their original mass in an in vitro degradation study conducted in phosphate-buffered saline (PBS) at 37 � C up to 10 weeks. Three-dimensional (3D) porous scaffolds were created by a porogen-leaching method and these constructs were evaluated for primary rat osteoblast (PRO) proliferation and phenotype development in vitro. This elastomer pro- moted primary rat osteoblast adhesion, proliferation and increased expression of alkaline phosphatase, an early marker of osteoblastic phenotype. These preliminary results suggest that PPCLSu may be a good candidate material for scaffolding applications in tissue regeneration. V C 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3770-3777, 2013

Successful bone regeneration benefits from three-dimensional (3D) bioresorbable scaffolds that mimic the hierarchical architecture and mechanical characteristics of native tissue extracellular matrix (ECM). A scaffold platform that integrates unique material chemistry with nanotopography while mimicking the 3D hierarchical bone architecture and bone mechanics is reported. A biocompatible dipeptide polyphosphazene-polyester blend is electrospun to produce fibers in the diameter range of 50–500 nm to emulate dimensions of collagen fibrils present in the natural bone ECM. Various electrospinning and process parameters are optimized to produce blend nanofibers with good uniformity, appropriate mechanical strength, and suitable porosity. Biomimetic 3D scaffolds are created by orienting blend nanofiber matrices in a concentric manner with an open central cavity to replicate bone marrow cavity, as well as the lamellar structure of bone. This biomimicry results in scaffold stress–strain curve similar to that of native bone with a compressive modulus in the mid-range of values for human trabecular bone. Blend nanofiber matrices support adhesion and proliferation of osteoblasts and show an elevated phenotype expression compared to polyester nanofibers. Furthermore, the 3D structure encourages osteoblast infiltration and ECM secretion, bridging the gaps of scaffold concentric walls during in vitro culture. The results also highlight the importance of in situ ECM secretion by cells in maintaining scaffold mechanical properties following scaffold degradation with time. This study for the first time demonstrates the feasibility of developing a mechanically competent nanofiber matrix via a biomimetic strategy and the advantages of polyphosphazene blends in promoting osteoblast phenotype progression for bone regeneration.

Synthetic biodegradable polymers serve as temporary substrates that accommodate cell infiltration and tissue in-growth in regenerative medicine. To allow tissue in-growth and nutrient transport, traditional three-dimensional (3D) scaffolds must be prefabricated with an interconnected porous structure. Here we demonstrated for the first time a unique polymer erosion process through which polymer matrices evolve from a solid coherent film to an assemblage of microspheres with an interconnected 3D porous structure. This polymer system was developed on the highly versatile platform of polyphosphazene-polyester blends. Co-substituting a polyphosphazene backbone with both hydrophilic glycylglycine dipeptide and hydrophobic 4-phenylphenoxy group generated a polymer with strong hydrogen bonding capacity. Rapid hydrolysis of the polyester component permitted the formation of 3D void space filled with self-assembled polyphosphazene spheres. Characterization of such self-assembled porous structures revealed macropores (10-100 μm) between spheres as well as micro- and nanopores on the sphere surface. A similar degradation pattern was confirmed in vivo using a rat subcutaneous implantation model. 12 weeks of implantation resulted in an interconnected porous structure with 82-87% porosity. Cell infiltration and collagen tissue in-growth between microspheres observed by histology confirmed the formation of an in situ 3D interconnected porous structure. It was determined that the in situ porous structure resulted from unique hydrogen bonding in the blend promoting a three-stage degradation mechanism. The robust tissue in-growth of this dynamic pore forming scaffold attests to the utility of this system as a new strategy in regenerative medicine for developing solid matrices that balance degradation with tissue formation.

Biodegradable polymeric scaffolds are being investigated as scaffolding materials for use in regenerative medicine. While the in vivo evaluation of various three-dimensional (3D), porous, biodegradable polymeric scaffolds has been reported, most studies are ≤3 months in duration, which is typically prior to bulk polymer degradation, a critical event that may initiate an inflammatory response and inhibit tissue formation. Here, a 6 month in vitro degradation and corresponding in vivo studies that characterized scaffold changes during complete degradation of an amorphous, 3D poly(lactide-co-glycolide) (3D-PLAGA) scaffold and near-complete degradation of a semi-crystalline 3D-PLAGA scaffold are reported. Using sintered microsphere matrix technology, constructs were fabricated in a tubular shape, with the longitudinal axis void and a median pore size that mimicked the architecture of native bone. Long-term quantitative measurements of molecular weight, mechanical properties, and porosity provided a basis for theorization of the scaffold degradation process. Following implantation in a critical size ulnar defect model, histological analysis and quantitative microCT indicated early solubilization of the semi-crystalline polymer created an acidic microenvironment that inhibited mineralized tissue formation. Thus, the use of amorphous over semi-crystalline PLAGA materials is advocated for applications in regenerative medicine.

Bone is a nanocomposite material comprised of hierarchically arranged collagen fibrils, hydroxyapatite and proteoglycans in the nanometer scale. Cells are accustomed to interact with nanostructures, thus providing the cells with a natural bone-like environment that potentially enhance bone tissue regeneration/repair. In this direction, nanotechnology provides opportunities to fabricate as well as explore novel properties and phenomena of functional materials, devices, and systems at the nanometer-length scale. Recent studies have provided significant insights into the influence of topographical features in regulating cell behavior. Topographical features provide essential chemical and physical cues that cells can recognize and elicit desired cellular functions including preferential adhesion, migration, proliferation, and expression of specific cell phenotype to bring desired effects. The current article will address some of the nanotechnology implications in addressing issues related to orthopedic implants performance and tissue engineering approach to bone repair/regeneration.

The compatibility and biological efficacy of biomedical implants can be enhanced by coating their surface with appropriate agents. For predictable functioning of implants in situ, it is often desirable to obtain an extremely uniform coating thickness without effects on component dimensions or functions. Conventional coating techniques require rigorous processing conditions and often have limited adhesion and composition properties. In the present study, the authors report a novel precision electrospraying technique that allows both degradable and nondegradable coatings to be placed. Thin metallic slabs, springs, and biodegradable sintered microsphere scaffolds were coated with poly(lactide-co-glycolide) (PLAGA) using this technique. The effects of process parameters such as coating material concentration and applied voltage were studied using PLAGA and poly(ethylene glycol) coatings. Morphologies of coated surfaces were qualitatively characterized by scanning electron microscopy. Qualitative observations suggested that the coatings were composed of particles of various size/shape and agglomerates with different porous architectures. PLAGA coatings of uniform thickness were observed on all surfaces. Spherical nanoparticle poly(ethylene glycol) coatings (462-930 nm) were observed at all concentrations studied. This study found that the precision electrospraying technique is elegant, rapid, and reproducible with precise control over coating thickness (mum to mm) and is a useful alternative method for surface modification of biomedical implants.

Grafting of acrylamide onto guar gum is achieved by Ce(IV) induced free-radical polymerization to prepare interpenetrating polymer network (IPN) beads of polyacrylamide-g-guar gum with sodium alginate by crosslinking with glutaraldehyde. Two widely used pesticides, solid chlorpyrifos and liquid fenvelarate, are loaded up to 60–70% efficiency in the IPN beads. The polymer and beads are characterized by Fourier transform IR spectroscopy to confirm grafting and to understand the possible interactions between the pesticides and the polymer matrix. Scanning electron microscopy is used to study the morphology of the beads. Equilibrium swelling experiments indicate that the swelling of the beads decreases with an increase in crosslinking, as well as an increase in pesticide loading. The in vitro release studies are performed under static conditions, and the release data are fitted to an empirical relationship to evaluate the transport parameters. Diffusion coefficients are calculated for the transport of pesticides through the polymeric beads using the initial and later time approximation methods. These values show a decrease with increasing crosslinking and increasing pesticide loading. Long-term diffusion coefficients as computed by Fick's equations are found to be smaller in magnitude when compared to the initial time diffusion coefficients. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 451–457, 2003

The grafting of acrylamide onto a chitosan backbone was carried out at three acrylamide concentrations (polymer/monomer ratio = 1:1, 1:2, and 1:3). The synthesis of the grafted polymer was achieved by K2S2O8-induced free-radical polymerization. Microspheres of polyacrylamide-g-chitosan crosslinked with glutaraldehyde were prepared to encapsulate nifedipine (NFD), a calcium channel blocker and an antihypertensive drug. The microspheres of polyacrylamide-g-chitosan were produced by a water-in-oil emulsion technique with three different concentrations of glutaraldehyde as the crosslinking agent. Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) were used to characterize the grafted copolymers, and the microspheres were prepared from them. FTIR and DSC were also used to analyze the extent of crosslinking. The microspheres were characterized by the particle size; the water transport into these microspheres, as well as the equilibrium water uptake, were studied. Scanning electron microscopy confirmed the spherical nature of the particles, which had a mean particle size of 450 μm. Individual particle dynamic swelling experiments suggested that with an increase in crosslinking, the transport became case II. The release of NFD depended on the crosslinking of the network and on the amount of drug loading. Calculating the drug diffusion coefficients with the initial time and later time approximation method further supported this. The drug release in all 27 formulations followed case II transport, and this suggested that the time dependence of the NFD release followed zero-order kinetics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2940–2949, 2003

Electrospun nanofiber matrices have attracted a great deal of attention as matrices for skin repair and regeneration. The current manuscript reports the fabrication and characterization of a bioactive polycaprolactone (PCL) fiber matrix for its ability to deliver multiple factors. Bioactive PCL matrices were created by incorporating a model angiogenic factor and a model antibiotic drug. Chitosan coating on the fiber matrices significantly improved the ability to hold moisture and contributed to antibiotic activity. These fiber matrices have a modulus of 5.8 61.3 MPa and matrices subjected to degradation over 4 weeks did not lose their tensile properties due to slow degradation rate. Chitosan coating avoided the initial burst release commonly associated with fiber matrices and only 60% of the encapsulated drug was released over a period of 15 days. Control PCL-chitosan matrices were able to reduce Staphylococcus aureus (S. aureus) growth both in static and dynamic condition as compared to formulations with 50 mg gentamicin. In general, all the fiber matrices were able to support fibroblast growth and maintained normal cell morphology. Such bioactive ban- dages may serve as versatile and less expensive alternatives for the treatment of complex wounds. V C 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41879.

Microspheres of polyacrylamide-grafted-chitosan crosslinked with glutaraldehyde were prepared and used to encapsulate indomethacin, a nonsteroidal anti-inflammatory drug. The microspheres were produced by the water/oil emulsion technique and encapsulation of indomethacin was carried out before crosslinking of the matrix. The extent of crosslinking was analyzed by Fourier transform infrared spectroscopy and differential scanning calorimetry. Microspheres were characterized for drug-entrapment efficiency, particle size, and water transport into the polymeric matrix as well as for drug-release kinetics. Scanning electron microscopy confirmed the spherical nature and surface morphology of the particles with a mean particle size of 525 μm. Dynamic swelling experiments suggested that, with an increase in crosslinking, the transport mechanism changed from Fickian to non-Fickian. The release of indomethacin depends upon the crosslinking of the network and also on the amount of drug loading. This was further supported by the calculation of drug-diffusion coefficients using the initial time approximation. The drug release in all the formulations followed a non-Fickian trend and the diffusion was relaxation-controlled. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1525–1536, 2003

Acrylic-based copolymers of methyl methacrylate (MMA) and methacrylic acid (MAA) have been prepared by solution and bulk polymerization techniques using benzoyl peroxide (BPO) as an initiator. Three polymers were prepared with a varying ratio of MMA/MAA. In an effort to increase the hydrophilicity of the matrix, one MMA/MAA polymer was prepared by adding an additional amount of 2-hydroxy ethyl methacrylate (HEMA). All the polymers were crosslinked in situ by ethylene glycol dimethacrylate (EGDMA). These polymers were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. Viscous flow characteristics were determined from solution viscosity and rheological measurements. Dynamic and equilibrium swelling experiments were carried out under varying pH conditions (i.e., 0.1N NaOH, 0.1N HCl, and double-distilled water). Partially crosslinked hydrogels show varying hydrophilicity because of the presence of carboxylic acid groups making them pH-responsive. Swelling increased with an increasing number of —COOH groups on the polymer backbone and the hydrophilicity varied with changing pH. Cypermethrin, a widely used pesticide, and cupric sulfate, a model micronutrient, were loaded into these pH-sensitive hydrogels to investigate their controlled release characteristics. The in vitro release rates of both compounds have been carried out under static dissolution conditions at 30°C. Release data have been fitted to an empirical relation to estimate transport parameters. The release results have been discussed in terms of the varying hydrophilicity of the hydrogel network polymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 394–403, 2003

Polyacrylamide-grafted sodium alginate (PAAm-g-Na-Alg) copolymeric membranes have been prepared, characterized, and used in the pervaporation separation of 10–80 mass % water-containing tetrahydrofuran mixtures. Totally three membranes were prepared: (1) neat Na-Alg with 10 mass % of polyethylene glycol (PEG) and 5 mass % of polyvinyl alcohol (PVA), (2) 46 % grafted PAAm-g-Na-Alg membrane containing 10 mass % of PEG and 5 mass % of PVA, and (3) 93 % grafted PAAm-g-Na-Alg membrane containing 10 mass % of PEG and 5 mass % of PVA. Using the transport data, important parameters like permeation flux, selectivity, pervaporation separation index, swelling index, and diffusion coefficient have been calculated at 30°C. Diffusion coefficients were also calculated from sorption gravimetric data of water–tetrahydrofuran mixtures using Fick's equation. Arrhenius activation parameters for the transport processes were calculated for 10 mass % of water in the feed mixture using flux and diffusion data obtained at 30, 35, and 40°C. The separation selectivity of the membranes ranged between 216 and 591. The highest permeation flux of 0.677 kg/m2 h was observed for 93% grafted membrane at 80 mass % of water in the feed mixture. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 272–281, 2002

Interpenetrating network polymeric beads of poly(vinyl alcohol)-grafted-acrylamide with sodium alginate have been prepared by crosslinking with glutaraldehyde. Cypermethrin, a widely used pesticide, was loaded with 80% efficiency in these hydrogel beads. The beads were characterized by Fourier transform infrared spectroscopy to confirm the grafting. Scanning electron microscopy was used to know the morphology of the beads. Equilibrium swelling experiments indicated that swelling of the beads decreased with an increase in crosslinking. The in vitro release studies were performed under static conditions and the release data have been fitted to an empirical relation to estimate the transport parameters. The diffusion coefficients have been calculated for the transport of pesticide through the polymeric beads using the initial time approximation method. These values showed decrease with increasing crosslinking as well as increasing pesticide loading. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 552–560, 2002; DOI 10.1002/app.10306

This article presents our preliminary experimental data on the release kinetics and encapsulation efficiency of urea formaldehyde (UF) crosslinked matrices of starch (St), guar gum (GG), and starch + guar gum (St + GG) for the controlled release of solid (chlorpyrifos) and liquid (neem seed oil) pesticides. The data reveal variable release rates in relation to the polymer type and especially the pesticide type. It is possible to slow the release rates of pesticides using cheaply available materials such as starch and guar gum. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2863–2866, 2001

Injectable hydrogels have attracted a great deal of attention as cell carriers and bioactive agents in regenerative medicine due to their ability to fill complex three-dimensional (3D) tissue gaps and relative ease of in vivo administration. Polysaccharide-based hydrogels can provide microenvironments that favor tissue regeneration and biocompatibility due to their chemical similarities with native extracellular matrix components. This manuscript reports the in vitro application of an injectable chitosan-based polysaccharide hydrogel for cell and protein delivery. Crosslinked hydrogels were produced by the reaction between the amino functionality of chitosan and the aldehyde of dextran aldehyde resulting in an imine bond (Schiff's base) formation in aqueous solutions. This approach eliminated the use of additional crosslinking agents which may pose undesired side effects regarding cytotoxicity and biocompatibility. Additionally, we demonstrate versatility of the gel in terms of its fabrication, and ability to alter mechanical properties by changing the crosslinking extent due to aldehyde content. Bovine serum albumin (BSA), used as a model protein, followed a steady release pattern from the gel. BSA release was dependent on the extent of hydrogel crosslinking. Increase in crosslinking extent resulted in improved mechanical properties and sustained release of BSA. Human fetal osteoblasts encapsulated into the hydrogel showed at least 70% viability and continued to proliferate under in vitro culture. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 39934.