Search

Fused-Core particles have recently been introduced as an alternative to using sub-2-microm particles in chromatographic separations. Fused-Core particles are composed of a 1.7 microm solid core surrounded by a 0.5 microm porous silica layer (d(p) = 2.7 microm) to reduce mass transfer and increase peak efficiency. The performance of two commercially available Fused-Core particles (Advanced Materials Technology Halo C18 and Supelco Ascentis Express C18) was compared with sub-2-microm particles from Waters, Agilent, and Thermo Scientific. Although the peak efficiencies were only approximately 80% of those obtained by the Waters Acquity particles, the 50% lower backpressure allowed columns to be coupled in series to increase peak efficiency to 92,750 plates. The low backpressure and high efficiencies of the Fused-Core particles offer a viable alternative to using sub-2-microm particles and very-high-pressure LC instrumentation.

The evolution of chromatography has led to the reduction in the size of the packing materials used to fabricate HPLC columns. The increase in the backpressure required has led to this technique being referred to as ultrahigh-pressure liquid chromatography (UHPLC) when the column backpressure exceeds 10000 psi (approximately 700 bar). Until recently, columns packed with sub-2-microm materials have generally fitted into two classes; either short (less than 5 cm) columns designed for use on traditional HPLC systems at pressures less than 5000 psi (350 bar), or capillary columns (inner diameters less than 100 microm). By using packing materials with diameters

Four different column packing techniques were used to pack capillary columns for comparison in capillary electrochromatography (CEC); the techniques were slurry pressure packing, using supercritical CO2, electrokinetic packing, and packing with centripetal forces. Capillary columns of 50 μm ID were packed with each technique and evaluated under electrochromatographic conditions. An initial evaluation suggested that among the packing techniques, supercritical CO2 packing and packing with centripetal forces produced the most efficient packed capillaries. However, examining the various protocols in detail revealed that experience of the practitioner and familiarity with packing equipment are critical factors in column fabrication. Upon further investigation of the packing techniques and optimization of the column fabrication protocol, columns packed by the four packing techniques showed similar performance when operated under CEC conditions. Efficiencies of 270,000–300,000 plates/m were observed for 50 μm ID capillary columns packed with 3 μm packing material.

We have prepared a series of bovine serum albumins (BSA) that have been site-selectively labeled at cysteine-34 with one of four different sulfhydryl-selective boron dipyrromethene difluoride (BODIPY) fluorescent probes (BODIPY FL IA, BODIPY FL C1 IA, BODIPY 530/550 IA, and BODIPY 493/503 MB). We determine how the choice of extrinsic probe structure dictates the recovered BSA-BODIPY dynamics under thermal (10–80°C) and chemical (0–5M guanidine hydrochloride) denaturation conditions. The results of these experiments show that the global protein dynamics are sensed equally by each fluorescent probe; however, the probe itself influences the local probe dynamics within the cybotactic region that surrounds cysteine-34. Thus, it seems inappropriate to think of these extrinsic fluorescent probes as passive, nonparticipatory viewers of local protein dynamics. © 2001 John Wiley & Sons, Inc. Biopolymers 59: 502–511, 2001

Capillary electrochromatography (CEC) continues to captivate many separation scientists. A remarkable activity is apparent from the numerous publications in the literature using CEC. A review of the most recent progress in CEC is presented herein, covering an extensive fraction of the literature on CEC published from the year 1997 until the beginning of 2000. Most of the recent developments have concentrated on column technology.

Capillary columns have been packed for capillary electrochromatography (CEC) using centripetal forces. The packed columns were maintained under wet conditions or they were dried with nitrogen gas prior to forming the retaining frits. Upon fabrication of the retaining frits, the dried columns were resolvated with the mobile phase. The performance of the columns was evaluated to determine the effect of the drying step during the packing procedure. The columns submitted to the drying step showed improved separation efficiencies and stronger retention characteristics than those kept under wet conditions. The drying step allows the silica-based packing material to be better accommodated inside the capillary column. Upon solvation, the packing material "swells," resulting in a greater packing density, which allows for a stronger retention and improved separation efficiencies. The drying step led to a 13% increase in retention on columns packed with isopropanol. An increase of 15-20% in theoretical plates for the most retained compounds was also observed in such columns.