Search

Abstract In this study, a surface plasmon resonance sensor for detecting haemoglobin concentration based on a D‐type optical fibre with a graphene‐gold surface architecture is proposed. The graphene‐gold surface architecture included a 50 nm thick gold film and monolayer graphene film, which were decorated on a 10 mm long D‐type sensing region. The proposed sensor worked in wavelength interrogation mode, with the light wavelength ranging from 400 to 1100 nm. The authors realised the D‐type optical fibre surface polishing process, the gold film vacuum coating process, and the chemical‐vapour‐deposited graphene's wet transfer process. Furthermore, the fabricated sensors were used to detect the refractive index (RI) of haemoglobin samples, which varied from 1.331 to 1.346. Experiment results show that the fitted RI sensitivity of the sensor decorated with gold and graphene reaches 1874.41 nm/RIU, 4.995% higher than that of the sensor decorated only with gold. The concentration sensitivity of the sensor coated with gold and graphene film is 4.96 nm/(g/dL), and the proposed sensor can provide a resolution of 20.2 mg/dL for haemoglobin concentration detection.

The Sn-Bi base lead-free solders are proposed as one of the most popular alloys due to the low melting temperature (eutectic point: 139°C) and low cost. However, they are not widely used because of the lower wettability, fatigue resistance, and elongation compared to traditional Sn-Pb solders. So the alloying is considered as an effective way to improve the properties of Sn-Bi solders with the addition of elements (Al, Cu, Zn, Ga, Ag, In, Sb, and rare earth) and nanoparticles. In this paper, the development of Sn-Bi lead-free solders bearing elements and nanoparticles was reviewed. The variation of wettability, melting characteristic, electromigration, mechanical properties, microstructures, intermetallic compounds reaction, and creep behaviors was analyzed systematically, which can provide a reference for investigation of Sn-Bi base solders.