Search

Hybrid nanomaterials with controlled dimensions, intriguing components and ordered structures have attracted significant attention in nanoscience and technology. Herein, we report a facile and green polyoxometallate (POM)-assisted hydrothermal carbonization strategy for synthesis of carbonaceous hybrid nanomaterials with molecularly dispersed POMs and ordered mesopores. By using various polyoxometallates such as ammonium phosphomolybdate, silicotungstic acid, and phosphotungstic acid, our approach can be generalized to synthesize ordered mesoporous hybrid nanostructures with diverse compositions and morphologies (nanosheet-assembled hierarchical architectures, nanospheres, and nanorods). Moreover, the ordered mesoporous nanosheet-assembled hierarchical hybrids with molecularly dispersed POMs exhibit remarkable catalytic activity toward the dehydration of tert-butanol with the high isobutene selectivity (100 %) and long-term catalytic durability (80 h).

Electrocatalytic carbon dioxide reduction reaction (CO

Two-dimensional (2D) organic-inorganic hybrid perovskite nanosheets (NSs) are attracting increasing research interest due to their unique properties and promising applications. Here, for the first time, we report the facile synthesis of single- and few-layer free-standing phenylethylammonium lead halide perovskite NSs, that is, (PEA)2 PbX4 (PEA=C8 H9 NH3 , X=Cl, Br, I). Importantly, their lateral size can be tuned by changing solvents. Moreover, these ultrathin 2D perovskite NSs exhibit highly efficient and tunable photoluminescence, as well as superior stability. Our study provides a simple and general method for the controlled synthesis of 2D perovskite NSs, which may offer a new avenue for their fundamental studies and optoelectronic applications.

The high-yield synthesis of 4H/face-centered cubic (fcc)-Au@Ir core-shell nanoribbons (NRBs) is achieved via the direct growth of Ir on 4H Au NRBs under ambient conditions. Importantly, this method can be used to synthesize 4H/fcc-Au@Os and 4H/fcc-Au@IrOs core-shell NRBs. Significantly, the obtained 4H/fcc-Au@Ir core-shell NRBs demonstrate an exceptional electrocatalytic activity toward the oxygen evolution reaction under acidic condition, which is much higher than that of the commercial Ir/C catalyst.

Phase engineering of nanomaterials is an effective strategy to tune the physicochemical properties of nanomaterials for various promising applications. Herein, by using the 4H-Au nanoribbons as templates, four novel magnetic nanostructures, namely 4H-Au @ 14H-Co nanobranches, 4H-Au @ 14H-Co nanoribbons, 4H-Au @ 2H-Co nanoribbons, and 4H-Au @ 2H-Ni nanoribbons, are synthesized based on the quasi-epitaxial growth. Different from the conventional epitaxial growth of metal nanomaterials, the obtained Co and Ni nanostructures possess different crystal phases from the Au template. Due to the large lattice mismatch between Au and the grown metals (i.e., Co and Ni), ordered misfit dislocations are generated at the Co/Au and Ni/Au interfaces. Notably, a new super-structure of Co is formed, denoted as 14H. Both 4H-Au @ 14H-Co nanobranches and nanoribbons are ferromagnetic at room temperature, showing similar Curie temperature. However, their magnetic behaviors exhibit distinct temperature dependence, resulting from the competition between spin and volume fluctuations as well as the unique geometry. This work paves the way to the templated synthesis of nanomaterials with unconventional crystal phases for the exploration of phase-dependent properties.

Reduced graphene oxide-wrapped MoO3M (rGO/MoO3 ) is prepared by a novel and simple method that is developed by using a metal-organic framework as the precursor. After a two-step annealing process, the obtained rGO/MoO3 composite is used for a high-performance supercapacitor electrode. Moreover, an all-solid-state flexible supercapacitor is fabricated based on the rGO/MoO3 composite, which shows stable performance under different bending states.

Exploration of low-cost and earth-abundant photocatalysts for highly efficient solar photocatalytic water splitting is of great importance. Although transition-metal dichalcogenides (TMDs) showed outstanding performance as co-catalysts for the hydrogen evolution reaction (HER), designing TMD-hybridized photocatalysts with abundant active sites for the HER still remains challenge. Here, a facile one-pot wet-chemical method is developed to prepare MS2–CdS (M=W or Mo) nanohybrids. Surprisedly, in the obtained nanohybrids, single-layer MS2 nanosheets with lateral size of 4–10 nm selectively grow on the Cd-rich (0001) surface of wurtzite CdS nanocrystals. These MS2–CdS nanohybrids possess a large number of edge sites in the MS2 layers, which are active sites for the HER. The photocatalytic performances of WS2–CdS and MoS2–CdS nanohybrids towards the HER under visible light irradiation (>420 nm) are about 16 and 12 times that of pure CdS, respectively. Importantly, the MS2–CdS nanohybrids showed enhanced stability after a long-time test (16 h), and 70 % of catalytic activity still remained.

MoS2, TaS2, TiS2, WSe2 and TaSe2 nanobelts decorated with a PtAg alloy or Pt NPs have been successfully synthesized by etching the 2D nanosheets under a mild reaction condition followed by the subsequent nanosheet-to-nanobelt transformation mediated by the PVP template. The PtAg-MoS2 hybrid nanobelt coated with PVP is used as the active material in a memory device, which exhibits the hysteresis behavior with the function of dynamic random access memory.

The electrochemical performance of supercapacitors relies not only on the exploitation of high-capacity active materials, but also on the rational design of superior electrode architectures. Herein, a novel supercapacitor electrode comprising 3D hierarchical mixed-oxide nanostructured arrays (NAs) of C/CoNi3 O4 is reported. The network-like C/CoNi3 O4 NAs exhibit a relatively high specific surface area; it is fabricated from ultra-robust Co-Ni hydroxide carbonate precursors through glucose-coating and calcination processes. Thanks to their interconnected three-dimensionally arrayed architecture and mesoporous nature, the C/CoNi3 O4 NA electrode exhibits a large specific capacitance of 1299 F/g and a superior rate performance, demonstrating 78% capacity retention even when the discharge current jumps by 100 times. An optimized asymmetric supercapacitor with the C/CoNi3 O4 NAs as the positive electrode is fabricated. This asymmetric supercapacitor can reversibly cycle at a high potential of 1.8 V, showing excellent cycling durability and also enabling a remarkable power density of ∼13 kW/kg with a high energy density of ∼19.2 W·h/kg. Two such supercapacitors linked in series can simultaneously power four distinct light-emitting diode indicators; they can also drive the motor of remote-controlled model planes. This work not only presents the potential of C/CoNi3 O4 NAs in thin-film supercapacitor applications, but it also demonstrates the superiority of electrodes with such a 3D hierarchical architecture.

The functional properties of noble metal nanomaterials are determined by their size, shape, composition, architecture and crystal structure/phase. In recent years, the crystal phase control of noble metal nanomaterials has emerged as an efficient and versatile strategy to tune their properties. In this tutorial review, we will give an overview of the latest research progress in the crystal phase-controlled synthesis of noble metal nanomaterials. Moreover, the crystal phase-dependent chemical and physical properties (e.g. chemical stability, magnetic, electrical and optical properties) and catalytic applications (e.g. oxygen reduction reaction, and oxidation reactions of formic acid, methanol and carbon monoxide) of noble metal nanomaterials are also briefly introduced. Finally, based on the current research status of the crystal phase-controlled synthesis of noble metal nanomaterials, we will provide some perspectives on the challenges and opportunities in this emerging research field.

Graphene, the thinnest two dimensional carbon material, has become the subject of intensive investigation in various research fields because of its remarkable electronic, mechanical, optical and thermal properties. Graphene-based electrodes, fabricated from mechanically cleaved graphene, chemical vapor deposition (CVD) grown graphene, or massively produced graphene derivatives from bulk graphite, have been applied in a broad range of applications, such as in light emitting diodes, touch screens, field-effect transistors, solar cells, supercapacitors, batteries, and sensors. In this Review, after a short introduction to the properties and synthetic methods of graphene and its derivatives, we will discuss the importance of graphene-based electrodes, their fabrication techniques, and application areas.

Two-dimensional nanomaterials, especially graphene and single- or few-layer transition metal dichalcogenide nanosheets, have attracted great research interest in recent years due to their distinctive physical, chemical and electronic properties as well as their great potentials for a broad range of applications. Recently, great efforts have also been devoted to the controlled synthesis of thin nanostructures of metals, one of the most studied traditional materials, for various applications. In this minireview, we review the recent progress in the synthesis and applications of thin metal nanostructures with a focus on metal nanoplates and nanosheets. First of all, various methods for the synthesis of metal nanoplates and nanosheets are summarized. After a brief introduction of their properties, some applications of metal nanoplates and nanosheets, such as catalysis, surface enhanced Raman scattering (SERS), sensing and near-infrared photothermal therapy are described.

Noble-metal nanomaterials are attracting increasing research interest due to their promising applications in electrochemical catalysis, for example. Although great efforts have been devoted to the size-, shape-, and architecture-controlled synthesis of noble-metal nanomaterials, their crystal-phase-controlled synthesis is still in its infancy. Here, for the first time, this study reports high-yield synthesis of Au nanorods (NRs) with alternating 4H/face-centered cubic (fcc) crystal-phase heterostructures via a one-pot wet-chemical method. The coexistence of 4H and fcc phases is relatively stable, and the 4H/fcc Au NRs can serve as templates for crystal-phase-controlled epitaxial growth of other metals. As an example, bimetallic 4H/fcc Au@Pd core-shell NRs are synthesized via the epitaxial growth of Pd on 4H/fcc Au NRs. Significantly, the 4H/fcc Au@Pd NRs show superior mass activity toward the ethanol oxidation reaction, i.e., 6.2 and 4.9 times those of commercial Pd black and Pt/C catalysts, respectively. It is believed that this new synthetic strategy can be used to prepare other novel catalysts for various promising applications.

Hierarchically porous carbons are attracting tremendous attention in sustainable energy systems, such as lithium ion battery (LIB) and fuel cell, due to their excellent transport properties that arise from the high surface area and rich porosity. The state-of-the-art approaches for synthesizing hierarchically porous carbons normally require chemical- and/or template-assisted activation techniques, which is complicate, time consuming, and not feasible for large scale production. Here, a molecular-level design principle toward large-scale synthesis of nitrogen and phosphorus codoped hierarchically porous carbon (NPHPC) through an in situ self-activation process is proposed. The material is fabricated based on the direct pyrolysis of a well-designed polymer, melamine polyphosphate, which is capable of in situ self-activation to generate large specific surface area (1479 m2 g−1) and hierarchical pores in the final NPHPC. As an anode material for LIB, NPHPC delivers a high reversible capacity of 1073 mAh g−1 and an excellent cyclic stability for 300 cycles with negligible capacity decay. The peculiar structural properties and synergistic effect of N and P codopants also enable NPHPC a promising electrocatalyst for oxygen reduction reaction, a key cathodic reaction process of many energy conversion devices (for example, fuel cells and metal air batteries). Electrochemical measurements show NPHPC a comparable electrocatalytic performance to commercial Pt/C catalyst (onset potential of 0.88 V vs reversible hydrogen electrode in alkaline medium) with excellent stability (89.8% retention after 20 000 s continuous operation) and superior methanol tolerance.

Graphene, the thinnest two dimensional carbon material, has become the subject of intensive investigation in various research fields because of its remarkable electronic, mechanical, optical and thermal properties. Graphene-based electrodes, fabricated from mechanically cleaved graphene, chemical vapor deposition (CVD) grown graphene, or massively produced graphene derivatives from bulk graphite, have been applied in a broad range of applications, such as in light emitting diodes, touch screens, field-effect transistors, solar cells, supercapacitors, batteries, and sensors. In this Review, after a short introduction to the properties and synthetic methods of graphene and its derivatives, we will discuss the importance of graphene-based electrodes, their fabrication techniques, and application areas.

A novel strategy of utilizing supramolecular polymerization for fabricating nitrogen doped porous graphene (NPG) with high doping level of 12 atom% as the anode material for lithium ion batteries is reported for the first time. The introduction of supramolecular polymer (melamine cyanurate) functions not only as a spacer to prevent the restacking of graphene sheets but also as a sacrificial template to generate porous structures, as well as a nitrogen source to induce in situ N doping. Therefore, pores and loose-packed graphene thin layers with high N doping level are very effectively formed in NPG after the annealing process. Such highly desired structures immediately offer remarkably improved Li storage performance including high reversible capacity (900 mAh g−1 after 150 cycles) with good cycling and rate performances. The effects of annealing temperature and heating rates on the final electrochemical performance of NPG are also investigated. Furthermore, the low cost, facile, and scalable features of this novel strategy may be helpful for the rational design of functionalized graphene-based materials for diverse applications.

Graphene quantum dots prove useful in lithium-ion batteries. This work introduces graphene quantum dots for the first time as surface coating material for lithium-ion battery electrodes, exemplified by copper oxide nanowires. The high-rate capability, initial columbic efficiency, and cycle life are improved by the surface coating. ASTAR (Agency for Sci., Tech. and Research, S’pore) Accepted version