Search

Surface defects have been a key constraint for perovskite photovoltaics. Herein, 1,3‐dimethyl‐3‐imidazolium hexafluorophosphate (DMIMPF6) ionic liquid (IL) is adopted to passivate the surface of a formamidinium‐cesium lead iodide perovskite (Cs0.08FA0.92PbI3) and also reduce the energy barrier between the perovskite and hole transport layer. Theoretical simulations and experimental results demonstrate that Pb‐cluster and Pb‐I antisite defects can be effectively passivated by [DMIM]+ bonding with the Pb2+ ion on the perovskite surface, leading to significantly suppressed non‐radiative recombination. As a result, the solar cell efficiency was increased to 23.25 % from 21.09 %. Meanwhile, the DMIMPF6‐treated perovskite device demonstrated long‐term stability because the hydrophobic DMIMPF6 layer blocked moisture permeation. [ABSTRACT FROM AUTHOR]

Flexible perovskite solar cells have attracted widespread research effort because of their potential in portable electronics. The efficiency has exceeded 18 % owing to the high‐quality perovskite film achieved by various low‐temperature fabrication methods and matching of the interface and electrode materials. This Review focuses on recent progress in flexible perovskite solar cells concerning low‐temperature fabrication methods to improve the properties of perovskite films, such as full coverage, uniform morphology, and good crystallinity; demonstrated interface layers used in flexible perovskite solar cells, considering key figures‐of‐merit such as high transmittance, high carrier mobility, suitable band gap, and easy fabrication via low‐temperature methods; flexible transparent electrode materials developed to enhance the mechanical stability of the devices; mechanical and long‐term environmental stability; an outlook of flexible perovskite solar cells in portable electronic devices; and perspectives of commercialization for flexible perovskite solar cells based on cost. Flexible perovskite solar cells have attracted significant attention owing to their promising potential in practical applications. This Review discusses the prerequisite conditions for flexible perovskite solar cells, provides an outlook of flexible perovskite devices in portable electronic products, and estimates their production cost by roll‐to‐roll vacuum deposition for commercialization. [ABSTRACT FROM AUTHOR]

Multijunction/tandem solar cells have naturally attracted great attention because they are not subject to the Shockley–Queisser limit. Perovskite solar cells are ideal candidates for the top cell in multijunction/tandem devices due to the high power conversion efficiency (PCE) and relatively low voltage loss. Herein, sandwiched gold nanomesh between MoO3 layers is designed as a transparent electrode. The large surface tension of MoO3 effectively improves wettability for gold, resulting in Frank–van der Merwe growth to produce an ultrathin gold nanomesh layer, which guarantees not only excellent conductivity but also great optical transparency, which is particularly important for a multijunction/tandem solar cell. The top MoO3 layer reduces the reflection at the gold layer to further increase light transmission. As a result, the semitransparent perovskite cell shows an 18.3% efficiency, the highest reported for this type of device. When the semitransparent perovskite device is mechanically stacked with a heterojunction silicon solar cell of 23.3% PCE, it yields a combined efficiency of 27.0%, higher than those of both the sub‐cells. This breakthrough in elevating the efficiency of semitransparent and multijunction/tandem devices can help to break the Shockley–Queisser limit. [ABSTRACT FROM AUTHOR]

The power conversion efficiency (PCE) of inverted perovskite solar cells (i‐PSCs) is lower than that of the normal structures. The low efficiency is mainly ascribed to the inferior properties of commonly used [6,6]‐phenyl C61 butyric acid methyl ester (PCBM) electron transport layers (ETLs) such as complexity in achieving high‐quality films, low electron mobility, imperfect energy level for electron extraction, and large electron capture region. Herein, the bulk heterojunction (BHJ) ETLs composed of PCBM and polymers are developed. The electron mobility of the BHJ film is enhanced by more than three times compared with PCBM, leading to efficient electron extraction. The electron capture region of the BHJ film decreases to 1.20 × 10−18 from 3.70 × 10−17 cm−3 for PCBM due to increased relative permittivity, which reduces the trap‐assistant recombination at the interface. Meanwhile, the devices with BHJ exhibit good stability regardless of illumination and dark storage conditions owing to the more hydrophobic BHJ films and full coverage of perovskite surface, which effectively prevent the moisture permeation into the perovskite devices. It is believed that this breakthrough provides a suitable approach to improve the efficiency and stability of i‐PSCs. [ABSTRACT FROM AUTHOR]