Search

To overcome the heat removal problem encountered in methanol synthesis at high syngas concentrations in the gas phase, a three-phase nonwetted catalytic system was established by introducing an inert liquid medium into a fixed-bed reactor. To form a repellent interface between the liquid and the catalyst, the catalyst was modified into hydrophobic, while the liquid medium was chosen as a room temperature ionic liquid with hydroxyl groups. The liquid-solid contact angle was measured to be 115°, and only 20% of the catalyst external surface was wetted by the liquid. Under three-phase condition, the reaction rate was measured to be 60%-70% of gas-phase reaction, while it was merely 10%-20% for the fully wetted catalyst. From the resistance analysis on the mass transfer and reaction steps, the overall reaction rate is expected to increase further if the surface could be more wet proofed. © 2016 American Institute of Chemical Engineers AIChE J, 63: 226-237, 2017 [ABSTRACT FROM AUTHOR]

The reaction kinetics of the pyrolysis of heavy oil in the presence of supercritical water (SCW) and high pressure N2 were measured. At any reaction temperature applied, the pyrolysis under SCW environments is faster than that under N2 environments. Meanwhile, at lower temperatures the pyrolysis under both environments is accelerated by the introduction of coke into the feedstock. On the basis of a first-order four-lump reaction network consisting of the sequential condensation of maltenes and asphaltenes, the pyrolysis in whichever medium can be preferably described either by the lumped reaction kinetic model modified with autocatalysis and pseudoequilibrium or by the model modified solely with pseudoequilibrium. Benefited from the reduced limitation of diffusion to reaction kinetics, the pyrolysis in the SCW phase is more sensitive to the increase in reaction temperature than that in the oil phase, disengaging readily from the dependence on autocatalysis at a lower temperature. [ABSTRACT FROM AUTHOR]

In the presence of supercritical water (SCW) and N2, the pyrolysis of heavy oil was investigated to distinguish the difference in the reaction kinetics between the upgrading in the SCW and oil phases. The pyrolysis in the SCW phase is faster than that in the oil phase, but the reaction in whichever phase is retarded by vigorous stirring. The pyrolysis can be preferably described by a four-lump kinetic model consisting of the condensation of maltenes and asphaltenes in series. In the SCW phase, highly dispersed asphaltenes are isolated by water clusters from maltenes dissolved in SCW surroundings, by which the condensation of asphaltenes is drastically accelerated. Benefited from excellent mass transfer environments in SCW, the condensation of maltenes is promoted simultaneously. The introduction of SCW into the pyrolysis of heavy oil results in an effectively increased upgrading efficiency, but its influence on the properties of equilibrium liquid products is minor. © 2014 American Institute of Chemical Engineers AIChE J, 61: 857-866, 2015 [ABSTRACT FROM AUTHOR]

A stochastic model was developed to describe the liquid radial dispersion in a trickle-bed reactor, which has conventionally been modeled by the effective diffusion model. To establish the stochastic model, the column was divided into some layers of particles in the axial direction and several annulus rings in each layer in the radial direction. The liquid spreading was regarded as a fluid transport process and the matrix of transfer probability was derived based on the coordinates of the particle network in the cross-section of the column. With this transfer probability matrix and the initial liquid distribution, the liquid distribution in the downstream was predicted. In order to evaluate the model parameters, experimental data of the liquid dispersion were obtained from electrical capacitance tomography images and tracer injection. Good agreement was obtained between the stochastic model and the experimental liquid distribution data. [ABSTRACT FROM AUTHOR]

The radial profiles of axial liquid velocity and gas hold-ups are investigated in the riser of a pilot plant scale external loop airlift reactor (ELAR) using a modified Pavlov tube and differential pressure technique. The experimental investigation reveals that there exist two different kinds of liquid circulation structures in an ELAR, which has rarely been reported in the literature, namely internal liquid circulation, which exists only in the riser and external liquid circulation, which circulates through the downcomer. A power-law relationship is used to correlate the gas hold-up and superficial gas velocity, which gives good agreement with experimental data. Experiments for axial liquid velocity profiles are analysed in analogy to a model described for a conventional bubble column. The results predicted by the model are in excellent agreement with the experimental data obtained under various operating conditions. © 2011 Canadian Society for Chemical Engineering [ABSTRACT FROM AUTHOR]

A three-region model was proposed, which considers the bed cross section being composed of a stagnant liquid region, a liquid film region, and a rivulet flow region. To estimate the fractions of the three regions, the fraction of film flow was evaluated first, by transforming the complex trickling flow texture into pure liquid film flow. Through the measurements of liquid holdup and pressure drop for the film flow, a relationship between relative permeability and gas saturation was established, and from which the fraction of film flow region was obtained. It shows packing size is most important to the faction of rivulet flow. The external wetting efficiency of the packing was correlated as the sum of two-third power of the liquid film fraction and the rivulet flow fraction, besides, a correlation based on Reynolds and Galileo numbers of the two phases in the form of [ABSTRACT FROM AUTHOR]