Search

A silicon oxide (SiO2) nanoparticles‐decorated short carbon fiber (SCF) hybrid (SCF‐SiO2) was designed to improve the weak interfacial bonding between fibers and matrix. Nano‐SiO2 was grafted onto carbon fibers by introducing amino group and epoxy group on the surface of carbon fibers and SiO2, respectively. The chemical composition of SCF‐SiO2 was analyzed by Fourier transform infrared spectrometer and energy‐dispersive spectrometry, the microstructure of SCF‐SiO2 were investigated by scanning electron microscope, and then the hybrid filler was introduced into Poly(ether ether ketone) (PEEK). Due to the strong interfacial interaction between filler and matrix, the mechanical and tribological properties of SCF‐SiO2/PEEK composites were significantly better than SCF/PEEK composites. In order to further improve the tribological properties of the composites, micrometer‐sized cenosphere (CS) particles were introduced into the aforementioned system to prepare multicomponent composites. The test results of friction and wear indicate that the CS/SCF‐SiO2/PEEK composites have the optimal tribological properties. Compared with pure PEEK, the friction coefficient of CS/SCF‐SiO2/PEEK composites under 200 N load decreases by 56.4% and the specific wear rate decreases by 87.4%. Meanwhile, the thermal decomposition temperature of CS/SCF‐SiO2/PEEK composites is increased by 40 °C compared to pure PEEK. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48749. [ABSTRACT FROM AUTHOR]

The article presents a study regarding the thermal conductivity in epoxy molding compounds (EMCs). The study used epoxy resin and multi-fillers of Si3N4 matrix and SiO2 filler. Results showed that the microstructure and morphology of the top of EMC indicated the formation of continuous network that anticipates heat conductivity. Moreover, the dielectric constant of EMC samples increased with Si3N4 content.

This investigation focuses on the effects of cenosphere fillers on tribological properties of carbon fiber reinforced PEEK composites. Dry sliding wear behavior of 15 wt % short carbon fiber (SCF) reinforced PEEK composites filled with 5, 10, 15, and 20 wt % cenosphere was reported in this study, pure PEEK and 15 wt % SCF reinforced PEEK composites were also prepared for comparative analysis. Friction and wear experiments were conducted on a ring‐on‐block apparatus under different loads (100–400 N). The experimental results showed that all the composites exhibited lower coefficient of friction and better wear resistance than the matrix resin under different load conditions. It is noted that 10 wt % of the cenosphere particles filled SCF reinforced PEEK composites show superior tribological properties when compared to the other composites in this study. The morphologies of the worn surface and the fracture surface were analyzed by scanning electron microscopy and the transfer film was observed by optical microscope to understand the dominant wear mechanisms. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47245. [ABSTRACT FROM AUTHOR]