Search

We herein disclose a mild and efficient access to chiral 3‐azabicyclo[3.1.0]hexanes via a Pd‐catalyzed asymmetric 5‐exo‐trig cyclization/cyclopropanation/carbonylation of 1,6‐enynes. Various nucleophiles, such as alcohols, phenols, amines and water, are well compatible with the reaction system. This reaction forms three C−C bonds, two rings, two adjacent quaternary carbon stereocenters as well as one C−O/C−N bond with excellent regio‐ and enantioselectivities. The products could be further functionalized to generate a library of 3‐azabicyclo[3.1.0]hexane frameworks. [ABSTRACT FROM AUTHOR]

Organic–inorganic halide perovskite solar cells (PSCs) are a new class of photovoltaic devices, which have attracted increasing interests due to high efficiency, low cost, and simple fabrication process. Although a remarkable enhancement in power conversion efficiency (PCE) has been achieved in the last decade, the stability issue, including high water/heat sensitivity and UV light‐induced degradation, has become one of the main obstacles for practical applications of PSCs. Herein, hydrophobic butyl acrylate with CO and CC groups is reported as a new additive to enhance the PCE and moisture/thermal stability of CH3NH3PbI3‐based PSCs, which improves the quality of the perovskite film by promoting defect passivation, constructing a suitable energy‐level alignment, and increasing the charge carrier lifetime in PSCs. Such an additive is easily introduced into PSCs without the need for thermal treatment, which is typically required by other additives, causing a negative effect on the efficiency. The CH3NH3PbI3‐based PSC with butyl acrylate additive shows a superior PCE of 20.0%, 19% higher than that of the unmodified device (16.8%), as well as much improved moisture/thermal stability. Herein, a facile way is provided to enhance the PCE and stability of CH3NH3PbI3‐based PSCs simultaneously, which facilitates the commercialization of PSCs. [ABSTRACT FROM AUTHOR]

A rechargeable hybrid zinc battery is developed for reaching high power density and high energy density simultaneously by introducing an alkaline Zn–transition metal compound (Zn–MX) battery function into a Zn–air battery. However, the conventional single‐layer electrode design cannot satisfy the requirements of both a hydrophilic interface for facilitating ionic transfer to maximize the Zn–MX battery function and a hydrophobic interface for promoting gas diffusion to maximize the Zn–air battery function. Here, a function‐separated design is proposed, which allocates the two battery functions to the two faces of the cathode. The electrode is composed of a hydrophobic MnS layer decorated with Ni–Co–S nanoclusters that allows for smooth gas diffusion and efficient oxygen electrocatalysis and a hydrophilic NixCo1−xS2 layer that favors fast ionic transfer and superior performance for energy storage. The battery with the function‐separated electrode shows a high short‐term discharge voltage of ≈1.7 V, an excellent high‐rate galvanostatic discharge–charge with a power density up to 153 mW cm−2 at 100 mA cm−2, a good round‐trip efficiency of 75% at 5 mA cm−2, and a robust cycling stability for 330 h with an excellent voltage gap of ≈0.7 V at 5 mA cm−2. [ABSTRACT FROM AUTHOR]

Perovskite solar cells (PSCs) are highly promising next‐generation photovoltaic devices because of the cheap raw materials, ideal band gap of ≈1.5 eV, broad absorption range, and high absorption coefficient. Although lead‐based inorganic‐organic PSC has achieved the highest power conversion efficiency (PCE) of 25.2%, the toxic nature of lead and poor stability strongly limits the commercialization. Lead‐free inorganic PSCs are potential alternatives to toxic and unstable organic‐inorganic PSCs. Particularly, double‐perovskite Cs2AgBiBr6‐based PSC has received interests for its all inorganic and lead‐free features. However, the PCE is limited by the inherent and extrinsic defects of Cs2AgBiBr6 films. Herein, an effective and facile strategy is reported for improving the PCE and stability by introducing an N719 dye interlayer, which plays multifunctional roles such as broadening the absorption spectrum, suppressing the charge carrier recombination, accelerating the hole extraction, and constructing an appropriate energy level alignment. Consequently, the optimizing cell delivers an outstanding PCE of 2.84%, much improved as compared with other Cs2AgBiBr6‐based PSCs reported so far in the literature. Moreover, the N719 interlayer greatly enhances the stability of PSCs under ambient conditions. This work highlights a useful strategy to boost the PCE and stability of lead‐free Cs2AgBiBr6‐based PSCs simultaneously, accelerating the commercialization of PSC technology. [ABSTRACT FROM AUTHOR]

Organic–inorganic hybrid perovskite solar cells (PSCs) have become a promising candidate in the photovoltaic field due to their high power conversion efficiency and low material cost. However, the development of PSCs is limited by their poor stability under practical conditions in the presence of oxygen, moisture, sunlight, heat, and the current–voltage (I–V) hysteresis. In particular, the hysteretic I–V issue casts doubt on the validity of the photovoltaic performance results that are achieved, making it difficult to evaluate the authentic performance of PSCs. This review article focuses on understanding the I–V hysteresis behavior in PSCs and on exploring the possible reasons leading to this hysteresis phenomenon. The various strategies attempted to suppress the I–V hysteresis in PSCs are summarized, and a brief future recommendation is provided. One of the problems that restrict the further development of perovskite solar cells (PSCs) is hysteresis, making it difficult to evaluate the reliable performance of PSCs. Recent process regarding the strategies to efficiently reduce hysteresis in PSCs is reviewed. The influential factors and possible reasons are also outlined. [ABSTRACT FROM AUTHOR]