Search

Trap states in organic solar cells (OSCs) can capture free charges, leading to a reduction in current density and significant energy loss. Since charge collection is primarily dependent on the interface layer, minimizing trap states at interfaces can effectively suppress energy losses, a topic that has been rarely explored. Herein, an interface strategy is proposed by combining Me‐4PACz and PEDOT:PSS to mitigate the trap‐assisted nonradiative recombination at the hole transport layer (HTL). OSCs based on the Me‐4PACz/PEDOT:PSS exhibit reduced trap densities and low energy losses compared to devices fabricated with a single‐layer HTL. This reduction can be attributed to a lower nonradiative recombination rate during hole transport at the interface. Changes in the work function of the two interlayers due to contact result in the existence of a built‐in potential inside the composite interlayer, promoting charge collection and reducing energy loss from charge recombination. Furthermore, the composite HTL interface induces vertical phase separation of active layer, leading to significant improvements of the fill factor for OSCs. As a result, high power conversion efficiencies (PCEs) of 18.70% and 19.02% are achieved for binary all‐polymer solar cells and polymer donor/small molecule acceptor solar cells, respectively. [ABSTRACT FROM AUTHOR]

The development of high‐efficiency organic solar cells (OSCs) processed from non‐halogenated solvents is crucially important for their scale‐up industry production. However, owing to the difficulty of regulating molecular aggregation, there is a huge efficiency gap between non‐halogenated and halogenated solvent processed OSCs. Herein, we fabricate o‐xylene processed OSCs with approaching 20 % efficiency by incorporating a trimeric guest acceptor named Tri‐V into the PM6:L8‐BO‐X host blend. The incorporation of Tri‐V effectively restricts the excessive aggregation of L8‐BO‐X, regulates the molecular packing and optimizes the phase‐separation morphology, which leads to mitigated trap density states, reduced energy loss and suppressed charge recombination. Consequently, the PM6:L8‐BO‐X:Tri‐V‐based device achieves an efficiency of 19.82 %, representing the highest efficiency for non‐halogenated solvent‐processed OSCs reported to date. Noticeably, with the addition of Tri‐V, the ternary device shows an improved photostability than binary PM6:L8‐BO‐X‐based device, and maintains 80 % of the initial efficiency after continuous illumination for 1380 h. This work provides a feasible approach for fabricating high‐efficiency, stable, eco‐friendly OSCs, and sheds new light on the large‐scale industrial production of OSCs. [ABSTRACT FROM AUTHOR]

Nowadays, it is still a great challenge to obtain high‐performance green‐solvent‐processed organic solar cells (OSCs). In this study, a ternary blend strategy (one donor and two acceptors, 1D/2A) is developed to solve the difficulty of film morphology modulation during the fabrication of high‐performance green‐solvent‐processed OSCs. A typical high‐performance halogenated‐solvent processable binary system D18:BTP‐eC9‐4F is selected as the host, its green‐solvents‐processed devices show an inferior power conversion efficiency (PCE) of ≈16%. SM16 with two 3D shape persistent end groups is selected as the third component due to its high fluorescence quantum yield, reduced intermolecular interaction, good solubility, and moderate crystallinity. As a result, the ternary devices display bicontinuous interpenetrating networks, reduced energy loss, and suppressed charge carrier recombination losses. Hence, an excellent PCE of 18.20% is achieved for the D18:BTP‐eC9‐4F:SM16 ternary devices, which is much higher than D18:BTP‐eC9‐4F‐based binary ones and also one of the highest PCEs for the green‐solvents‐processed OSCs. Besides, this strategy also demonstrates a good universality for other binary systems and becomes an effective pathway for the development of green‐solvent processable high‐performance OSCs. [ABSTRACT FROM AUTHOR]

The large energy loss (Eloss) is one of the main obstacles to further improve the photovoltaic performance of organic solar cells (OSCs), which is closely related to the charge transfer (CT) state. Herein, ternary donor alloy strategy is used to precisely tune the energy of CT state (ECT) and thus the Eloss for boosting the efficiency of OSCs. The elevated ECT in the ternary OSCs reduce the energy loss for charge generation (ΔECT), and promote the hybridization between localized excitation state and CT state to reduce the nonradiative energy loss (ΔEnonrad). Together with the optimal morphology, the ternary OSCs afford an impressive power conversion efficiency of 19.22% with a significantly improved open‐circuit voltage (Voc) of 0.910 V without sacrificing short‐cicuit density (Jsc) and fill factor (FF) in comparison to the binary ones. This contribution reveals that precisely tuning the ECT via donor alloy strategy is an efficient way to minimize Eloss and improve the photovoltaic performance of OSCs. [ABSTRACT FROM AUTHOR]

Two new fused‐ring electron acceptor (FREA) isomers with nonlinear and linear molecular conformation, m‐BAIDIC and p‐BAIDIC, are designed and synthesized. Despite the similar light absorption range and energy levels, the two isomers exhibit distinct electron reorganization energies and molecular packing motifs, which are directly related to the molecular conformation. Compared with the nonlinear acceptor, the linear p‐BAIDIC shows more ordered molecular packing and higher crystallinity. Furthermore, p‐BAIDIC‐based devices exhibit reduced nonradiative energy loss and improved charge transport mobilities. It is beneficial to enhance the open‐circuit voltage (VOC) and short‐current current density (JSC) of the devices. Therefore, the linear FREA, p‐BAIDIC yields a relatively higher efficiency of 7.71% in the binary device with PM6, in comparison with the nonlinear m‐BAIDIC. When p‐BAIDIC is incorporated into the binary PM6/BO‐4Cl system to form a ternary system, synergistic enhancements in VOC, JSC, fill factor (FF), and ultimately a high efficiency of 17.6% are achieved. [ABSTRACT FROM AUTHOR]

The donor/acceptor interaction in non‐fullerene organic photovoltaics leads to the mixing domain that dictates the morphology and electronic structure of the blended thin film. Initiative effort is paid to understand how these domain properties affect the device performances on high‐efficiency PM6:Y6 blends. Different fullerenes acceptors are used to manipulate the feature of mixing domain. It is seen that a tight packing in the mixing region is critical, which could effectively enhance the hole transfer and lead to the enlarged and narrow electron density of state (DOS). As a result, short‐circuit current (JSC) and fill factor (FF) are improved. The distribution of DOS and energy levels strongly influences open‐circuit voltage (VOC). The raised filling state of electron Fermi level is seen to be key in determining device VOC. Energy disorder is found to be a key factor to energy loss, which is highly correlated with the intermolecular distance in the mixing region. A 17.53% efficiency is obtained for optimized ternary devices, which is the highest value for similar systems. The current results indicate that a delicate optimization of the mixing domain property is an effective route to improve the VOC, JSC, and FF simultaneously, which provides new guidelines for morphology control toward high‐performance organic solar cells. [ABSTRACT FROM AUTHOR]

The electron donor/acceptor (D/A) heterojunction is the core for photocharge generation and recombination in organic photovoltaics (OPVs). Developing practical methods for the D/A heterojunction modification remains challenging and is rarely discussed in OPV research. Herein, the roles of molecular doping at the D/A heterojunction in the charge‐transfer exciton dissociation and detailed energy loss are investigated, and new insights are gained into the functions of doping on the OPV performance. Heterojunction doping simultaneously enhances all three OPV parameters, especially the short‐circuit current (Jsc). It is shown that the Jsc improvement is due to the combined effects of strengthened electric field and reduced activation energy, which is regulated via an entropy‐related mechanism. The performance enhancement is further demonstrated in homojunction devices showing the great potential of interfacial doping to overcome the intrinsic limitation between high Jsc and open‐circuit voltage (Voc) in OPVs. [ABSTRACT FROM AUTHOR]

Fused‐ring electron acceptors have made significant progress in recent years, while the development of fully non‐fused ring acceptors has been unsatisfactory. Here, two fully non‐fused ring acceptors, o‐4TBC‐2F and m‐4TBC‐2F, were designed and synthesized. By regulating the location of the hexyloxy chains, o‐4TBC‐2F formed planar backbones, while m‐4TBC‐2F displayed a twisted backbone. Additionally, the o‐4TBC‐2F film showed a markedly red‐shifted absorption after thermal annealing, which indicated the formation of J‐aggregates. For fabrication of organic solar cells (OSCs), PBDB‐T was used as a donor and blended with the two acceptors. The o‐4TBC‐2F‐based blend films displayed higher charge mobilities, lower energy loss and a higher power conversion efficiency (PCE). The optimized devices based on o‐4TBC‐2F gave a PCE of 10.26 %, which was much higher than those based on m‐4TBC‐2F at 2.63 %, and it is one of the highest reported PCE values for fully non‐fused ring electron acceptors. [ABSTRACT FROM AUTHOR]