Search

Inverted (p‐i‐n) perovskite solar cells (PSCs) are advantageous in terms of easy fabrication, low‐temperature processibility, negligible hysteresis, and excellent compatibility with the tandem devices in comparison with the regular (n‐i‐p) counterparts. Hole‐blocking layer is crucial for efficient electron transport of inverted PSCs, and only a single hole‐blocking layer of bathocuproine (BCP) is used typically. Herein, bis[2‐(diphenylphosphino)phenyl] ether oxide (DPEPO) with a deep highest occupied molecular orbital (HOMO) energy level is incorporated atop of perovskite film as an auxiliary hole‐blocking layer, resulting in an enhanced electron transport of inverted PSC devices. The P=O group within DPEPO can coordinate with Pb2+ cations of perovskite, leading to passivation of surface defects of perovskite. Besides, incorporation of DPEPO hole‐blocking layer prohibits undesired hole transport from perovskite to PCBM electron transport layer (ETL), thus suppressing non‐radiative electron–hole recombination. As a result, combined with BCP hole‐blocking layer, inverted PSC devices based on double hole‐blocking layers exhibit a decent power conversion efficiency (PCE) of 24.17% with a high open‐circuit voltage (Voc) of 1.15 V which dramatically surpasses that based on single hole‐blocking layer (22.26%). Moreover, incorporation of hydrophobic DPEPO helps to improve the ambient and thermal stabilities of inverted PSC devices. [ABSTRACT FROM AUTHOR]

Organic semiconductors with noncovalently conformational locks (OSNCs) are promising building blocks for hole‐transporting materials (HTMs). However, lack of satisfied neighboring building blocks negatively impacts the optoelectronic properties of OSNCs‐based HTMs and imperils the stability of perovskite solar cells (PSCs). To address this limitation, we introduce the benzothieno[3,2‐b]thiophene (BTT) to construct a new OSNC, and the resulting HTM ZS13 shows improved intermolecular charge extraction/transport properties, proper energy level, efficient surface passivation effect. Consequently, the champion devices based on doped ZS13 yield an efficiency of 24.39 % and 20.95 % for aperture areas of 0.1 and 1.01 cm2, respectively. Furthermore, ZS13 shows good thermal stability and the capability of inhibiting I− ion migration, thus, leading to enhanced device stability. The success in neighboring‐group engineering can triggered a strong interest in developing thienoacene‐based OSNCs toward efficient and stable PSCs. [ABSTRACT FROM AUTHOR]

In the past decade, metal‐halide perovskites have attracted increasing attention in optoelectronics, due to their superior optoelectronic properties. However, inherent instabilities of conventional three‐dimensional (3D) perovskites over moisture, heat, and light remain a severe challenge before the realization of commercial application of metal‐halide perovskites. Interestingly, when the dimensions of metal‐halide perovskites are reduced to two dimensions (2D), many of the novel properties will arise, such as enlarged bandgap, high photoluminescence quantum yield, and large exciton binding energy. As a result, 2D metal‐halide perovskite‐based optoelectronic devices display excellent performance, particularly as ambient stable solar cells with excellent power conversion efficiency (PCE), high‐performance light‐emitting diodes (LEDs) with sharp emission peak, and high‐sensitive photodetectors. In this review, we first introduce the synthesis, structure, and physical properties of 2D perovskites. Then, the 2D perovskite‐based solar cells, LEDs, and photodetectors are discussed. Finally, a brief overview of the opportunities and challenges for 2D perovskite optoelectronics is presented. [ABSTRACT FROM AUTHOR]

Photovoltaic power‐conversion systems can harvest energy from sunlight almost perpetually whenever sunrays are accessible. Meanwhile, as indispensable energy storage units used in advanced technologies such as portable electronics, electric vehicles, and renewable/smart grids, batteries are energy‐limited closed systems and require constant recharging. Fusing these two essential technologies into a single device would create a sustainable power source. Here, it is demonstrated that such an integrated device can be realized by fusing a rear‐illuminated single‐junction perovskite solar cell with Li4Ti5O12‐LiCoO2 Li‐ion batteries, whose photocharging is enabled by an electronic converter via voltage matching. This design facilitates a straightforward monolithic stacking of the battery on the solar cell using a common metal substrate, which provides a robust mechanical isolation between the two systems while simultaneously providing an efficient electrical interconnection. This system delivers a high overall photoelectric conversion‐storage efficiency of 7.3%, outperforming previous efforts on stackable integrated architectures with organic–inorganic photovoltaics. Furthermore, converter electronics facilitates system control with battery management and maximum power point tracking, which are inevitable for efficient, safe, and reliable operation of practical loads. This work presents a significant advancement toward integrated photorechargeable energy storage systems as next‐generation power sources. [ABSTRACT FROM AUTHOR]

Ionic defects at the surfaces of organolead halide perovskite films are detrimental to both the efficiency and stability of perovskite solar cells (PSCs). Herein, sodium p‐toluenesulfonate (STS) is applied during the surface modification of perovskite layer for the first time, leading to the efficient surface passivation of the perovskite film and consequently significant enhancements in both efficiency and stability of mixed‐cation PSC devices. Upon incorporating STS atop the perovskite layer, the power conversion efficiency of the Cs0.05MA0.12FA0.83PbI2.55Br0.45 (abbreviated as CsMAFA) mesoporous‐structure mixed‐cation PSC devices improves from 18.70% to 20.05% with reduced hysteresis. The sulfonate (–SO3−) anion of STS coordinates with the Pb2+ of CsMAFA perovskite, and the Na+ cation of STS electrostatically interacts with the anions (I−/Br−) of CsMAFA perovskite, resulting in the surface passivation of the CsMAFA perovskite film with reduced electron and hole trap state densities. In addition, STS modification induces an upshift of the valence band of perovskite, facilitating hole extraction from the perovskite layer to the hole transport layer with suppressed interfacial charge recombination. Moreover, such a trap state passivation of perovskite film leads to improvement of the ambient stability of PSC devices. [ABSTRACT FROM AUTHOR]

Perovskite solar cells (PSCs) based on planar SnO2 (p‐SnO2) demonstrate excellent performance due to the superior properties of SnO2 as electron transporting layer (ETL). However, at present mesoporous SnO2 (m‐SnO2) still lags behind p‐SnO2 due to problems in the fabrication process of m‐SnO2. In this paper, a new strategy for preparing m‐SnO2 ETL is introduced which owns two valuable features: First, it applies a low temperature process to make mesoporous structure, which favors preserving the pristine properties of the raw SnO2 nanocrystals. Second, the degree of porosity and roughness of the m‐SnO2 layer can be well controlled, making it friendly to the following deposition process of PSCs. The performance of the PSCs based on the m‐SnO2 ETL prepared from this strategy shows an obvious improvement which is mainly from the improvement in Jsc and FF, suggesting a higher carrier collection efficiency for the m‐SnO2 ETL. The relevant characterizations including PL, TRPL, EIS, and KPFM confirm that the m‐SnO2 ETL possesses stronger electron extraction capability than the p‐SnO2 ETL. Hence, the proposed strategy can manifest the advantages of m‐SnO2 ETL meanwhile refrain its negative impacts, and thus promote the progress of the m‐SnO2 ETL‐based PSCs. [ABSTRACT FROM AUTHOR]