Search

In electric drive applications that are based on high‐speed induction motors (IMs) with an extended speed range, stator winding pole‐changing is a possible technique to avoid oversizing the driving motor. The electronic pole changing employed in multiphase IMs has gained recent interest because it avoids physical winding reconfiguration. The effective number of poles of the air gap flux distribution can be electronically altered by simply changing the applied current sequence to a multiphase stator. The main problem associated with this technique is the significant increase in machine magnetising current with the increase in effective pole number when conventional multiphase distributed windings are employed. This study proposes a new fractional‐slot concentrated winding layout with a special stator connection suitable for pole‐amplitude modulated IMs that offers a 2:1 pole ratio while maintaining equal magnetising current for both winding pole pairs. Moreover, constant power operation can be achieved for a speed range of over 4 pu. The main concept is discussed and verified through simulations and experimentally. The machine mathematical model and the required vector space decomposition‐based controller are also presented. [ABSTRACT FROM AUTHOR]

This study proposes a new architecture of flywheel energy storage system (FESS) which can be implemented at generating unit (GU) level (e.g. wind turbine) or scaled up for application in grid‐side converter (GSC) stations of a multi‐terminal direct current (MTDC) system. The proposed architecture suppresses DC voltage leaps under grid faults, and performs power levelling duty at grid connection points. When implemented at GU level, the proposed FESS features a doubly‐fed induction machine (DFIM) – the flywheel machine – where its six stator winding terminals are connected in series between the grid and the GSC. The flywheel converter is of partial power rating, and is connected to the DFIM rotor. When employed at an MTDC GSC station, several submodules are connected to build an FESS station. The study proposes the control concept and the general topology of the FESS station. The performance parameters of the system are tested under normal and abnormal operating conditions. Results and analyses indicate smooth dynamic operation, the economic advantage and the improved fault ride‐through capability because of the proposed system. [ABSTRACT FROM AUTHOR]