Search

Inverted (p‐i‐n) perovskite solar cells (PSCs) are advantageous in terms of easy fabrication, low‐temperature processibility, negligible hysteresis, and excellent compatibility with the tandem devices in comparison with the regular (n‐i‐p) counterparts. Hole‐blocking layer is crucial for efficient electron transport of inverted PSCs, and only a single hole‐blocking layer of bathocuproine (BCP) is used typically. Herein, bis[2‐(diphenylphosphino)phenyl] ether oxide (DPEPO) with a deep highest occupied molecular orbital (HOMO) energy level is incorporated atop of perovskite film as an auxiliary hole‐blocking layer, resulting in an enhanced electron transport of inverted PSC devices. The P=O group within DPEPO can coordinate with Pb2+ cations of perovskite, leading to passivation of surface defects of perovskite. Besides, incorporation of DPEPO hole‐blocking layer prohibits undesired hole transport from perovskite to PCBM electron transport layer (ETL), thus suppressing non‐radiative electron–hole recombination. As a result, combined with BCP hole‐blocking layer, inverted PSC devices based on double hole‐blocking layers exhibit a decent power conversion efficiency (PCE) of 24.17% with a high open‐circuit voltage (Voc) of 1.15 V which dramatically surpasses that based on single hole‐blocking layer (22.26%). Moreover, incorporation of hydrophobic DPEPO helps to improve the ambient and thermal stabilities of inverted PSC devices. [ABSTRACT FROM AUTHOR]

Organic semiconductors with noncovalently conformational locks (OSNCs) are promising building blocks for hole‐transporting materials (HTMs). However, lack of satisfied neighboring building blocks negatively impacts the optoelectronic properties of OSNCs‐based HTMs and imperils the stability of perovskite solar cells (PSCs). To address this limitation, we introduce the benzothieno[3,2‐b]thiophene (BTT) to construct a new OSNC, and the resulting HTM ZS13 shows improved intermolecular charge extraction/transport properties, proper energy level, efficient surface passivation effect. Consequently, the champion devices based on doped ZS13 yield an efficiency of 24.39 % and 20.95 % for aperture areas of 0.1 and 1.01 cm2, respectively. Furthermore, ZS13 shows good thermal stability and the capability of inhibiting I− ion migration, thus, leading to enhanced device stability. The success in neighboring‐group engineering can triggered a strong interest in developing thienoacene‐based OSNCs toward efficient and stable PSCs. [ABSTRACT FROM AUTHOR]

Ni‐rich layered oxides have been considered one of the most promising cathode materials for lithium‐ion batteries on account of their high reversible capacity. However, their chemical sensitivity to moisture and carbon dioxide results in the formation and growth of residual lithium compounds, leading to a deterioration in electrochemical performance and difficulty in cathode electrode preparation. In this work, a passivation coating of polydimethylsiloxane with 5 molecular layers is successfully coated on LiNi0.8Co0.1Mn0.1O2 particles. To examine the hydrophobicity of polydimethylsiloxane, bare and coated NCM811 are exposed to a hot and humid chamber for dozens of hours, even exposure to damp air over 120 h. The results indicate that the hydrophobic coating can inhibit the formation and growth of residual lithium compounds on the surface of LiNi0.8Co0.1Mn0.1O2, resulting in slightly less degradation in electrochemical performance. Herein, a rapid, low‐cost, and easily employed method to generate an even hydrophobic/passivation surface is developed, which provides a generic approach to treat various electrode materials, especially nanosized and water‐sensitive ones, to improve their tolerance to extreme environments. [ABSTRACT FROM AUTHOR]

Ionic defects at the surfaces of organolead halide perovskite films are detrimental to both the efficiency and stability of perovskite solar cells (PSCs). Herein, sodium p‐toluenesulfonate (STS) is applied during the surface modification of perovskite layer for the first time, leading to the efficient surface passivation of the perovskite film and consequently significant enhancements in both efficiency and stability of mixed‐cation PSC devices. Upon incorporating STS atop the perovskite layer, the power conversion efficiency of the Cs0.05MA0.12FA0.83PbI2.55Br0.45 (abbreviated as CsMAFA) mesoporous‐structure mixed‐cation PSC devices improves from 18.70% to 20.05% with reduced hysteresis. The sulfonate (–SO3−) anion of STS coordinates with the Pb2+ of CsMAFA perovskite, and the Na+ cation of STS electrostatically interacts with the anions (I−/Br−) of CsMAFA perovskite, resulting in the surface passivation of the CsMAFA perovskite film with reduced electron and hole trap state densities. In addition, STS modification induces an upshift of the valence band of perovskite, facilitating hole extraction from the perovskite layer to the hole transport layer with suppressed interfacial charge recombination. Moreover, such a trap state passivation of perovskite film leads to improvement of the ambient stability of PSC devices. [ABSTRACT FROM AUTHOR]