Search

Machine learning are vulnerable to the threats. The Intruders can utilize the malicious nature of the nodes to attack the training dataset to worsen the process and manipulate the learning and make the over all system with less efficiency and performance. The optimized poison attack procedures are already introduced to estimate the overall bad scenario, design the intrusion as bi‐level optimization and it is considered computational complexity is high and demanding, in contrary the applicability is limited such models deep neural networks. In this research papers, we have proposed, novel proposed system, poisoning attacks against the Machine learning training dataset, including the genuine data points that reduce the accuracy of the classifier in the process of training. The proposed system have 3 components of Generative Adverserial networks (GAN) generator, discriminator, and the target classifier. The proposed system allows to detect the vulnerability easy and it can be found as similar as realistic attacks to detect the area where the underlying data distribution have more possibility of poising attack which cause vulnerability to the network. Our experimentation, proves the claim our that the proposed model is effective on compromising the classifiers uses the machine learning algorithms and also deep learning networks. [ABSTRACT FROM AUTHOR]

During the last few decades, the quality of water has deteriorated significantly due to pollution and many other issues. As a consequence of this, there is a need for a model that can make accurate projections about water quality. This work shows the comparative analysis of different machine learning approaches like Support Vector Machine (SVM), Decision Tree (DT), Random Forest, Gradient Boost, and Ada Boost, used for the water quality classification. The model is trained on the Water Quality Index dataset available on Kaggle. Z-score is used to normalize the dataset before beginning the training process for the model. Because the given dataset is unbalanced, Synthetic Minority Oversampling Technique (SMOTE) is used to balance the dataset. Experiments results depict that Random Forest and Gradient Boost give the highest accuracy of 81%. One of the major issues with the machine learning model is lack of transparency which makes it impossible to evaluate the results of the model. To address this issue, explainable AI (XAI) is used which assists us in determining which features are the most important. Within the context of this investigation, Local Interpretable Model-agnostic Explanations (LIME) is utilized to ascertain the significance of the features. [ABSTRACT FROM AUTHOR]

Capital structure is an integral part of the corporate finance that sources the funds to finance growth and operations. Managers always have to maintain value of the firm to be higher than the cost of capital in order to maximize the shareholders wealth. Empirical studies have used sources of finance like debt and equity as variables of capital structure. A choice between debt and equity finance analyzes the firm's ability to perform under the financially constrained environment to attain the sustainable growth. Therefore, it gives rise to a dire need to estimate the cost of capital precisely. We examined the capital structure of top ten market capitalization of the stock markets included in MSCI Emerging index with the use of artificial neural networks, support vector regression, and linear regression in forecasting methods. The capital structure is measured as the proportion of total debt over total equity (Tang et al., 1991). Other financial ratios such as profitability, liquidity, solvent, and turnover ratios were considered as drivers of the capital structure. Applying logistic and hyperbolic tangent activation functions, it was concluded that ANN has a great potential of replacing other traditional forecasting models with the nonstationary data. This research contributes with a new dimension for estimation through different activation functions. There is a possibility of ANN dominance as compared to the other models applied for predictability in financial markets. [ABSTRACT FROM AUTHOR]

Image segmentation and computer vision are becoming more important in computer-aided design. A computer algorithm extracts image borders, colours, and textures. It also depletes resources. Technical knowledge is required to extract information about distinctive features. There is currently no medical picture segmentation or recognition software available. The proposed model has 13 layers and uses dilated convolution and max-pooling to extract small features. Ghost model deletes the duplicated features, makes the process easier, and reduces the complexity. The Convolution Neural Network (CNN) generates a feature vector map and improves the accuracy of area or bounding box proposals. Restructuring is required for healing. As a result, convolutional neural networks segment medical images. It is possible to acquire the beginning region of a segmented medical image. The proposed model gives better results as compared to the traditional models, it gives an accuracy of 96.05, Precision 98.2, and recall 95.78. The first findings are improved by thickening and categorising the image's pixels. Morphological techniques may be used to segment medical images. Experiments demonstrate that the recommended segmentation strategy is effective. This study rethinks medical image segmentation methods. [ABSTRACT FROM AUTHOR]

A significant study has been undertaken in the areas of health care and administration of cutting-edge artificial intelligence (AI) technologies throughout the previous decade. Healthcare professionals studied smart gadgets and other medical technologies, along with the AI-based Internet of Things (IoT) (AIoT). Connecting the two regions makes sense in terms of improving care for rural and isolated resident individuals. The healthcare industry has made tremendous strides in efficiency, affordability, and usefulness as a result of new research options and major cost reductions. This includes instructions (AIoT-based) medical advancements can be both beneficial and detrimental. While the IoT concept undoubtedly offers a number of benefits, it also poses fundamental security and privacy concerns regarding medical data. However, resource-constrained AIoT devices are vulnerable to a number of assaults, which can significantly impair their performance. Cryptographic algorithms used in the past are inadequate for safeguarding IoT-enabled networks, presenting substantial security risks. The AIoT is made up of three layers: perception, network, and application, all of which are vulnerable to security threats. These threats can be aggressive or passive in nature, and they can originate both within and outside the network. Numerous IoT security issues, including replay, sniffing, and eavesdropping, have the ability to obstruct network communication. The AIoT-H application is likely to be explored in this research article due to its potential to aid with existing and different technologies, as well as bring useful solutions to healthcare security challenges. Additionally, every day, several potential problems and inconsistencies with the AIoT-H technique have been discovered. [ABSTRACT FROM AUTHOR]

As a result of their natural capacity to recover harmonic current and reactive power from alternating current sources, power electronic devices utilized in conjunction with nonlinear loads have the potential to generate significant harmonic problems within the power system when employed in this way. When this occurs, voltage instability occurs, which must be avoided in order to maintain the consistency and dependability of the power system's power flow. With this approach, the series controller has been replaced by a multilevel modular controller in order to improve power handling capability and achieve higher modular levels with minimal distortions. The shunt compensator is the most effective way to achieve an extremely protected energy system as well as righteous steadiness in electric potential difference under a variety of load constraints. The DQ thesis is employed in this proposed converter to separate the harmonic components by establishing reference frame current, which is accomplished by machine learning techniques. As part of the constant mode operation, the PI controller contributes to maintaining the direct current-potential difference, which is given to the PWM generator. Optimization of the values of K p and K i is accomplished by the use of particle swarm optimization (PSO). The construction of this power system simulation model has been made feasible by the use of time-fluctuating characteristics modeling and the MATLAB programming environment. The new (unified power flow controller) UPFC research that has been made available is persuasive in its capacity to reduce distortions and watt-less power components while simultaneously enhancing efficiency and reducing costs. [ABSTRACT FROM AUTHOR]

A flood is defined as a surplus of water or sludge on parched soil, and a flood has originated through the runoff of water inside the water route from the various water sources like canals, etc. Intense rainfall, deforestation, urbanization, deprived water and sewerage administration, and lack of concentration toward the environment of the hydrological scheme have been the causes of urban flooding. In addition, there is a deficiency in flood assessment due to the impediment in getting data on floods to the control room from the flood-affected area. To diminish the possessions due to flooding, there ought to be an immediate move of captured statistics as of the hectic region en route to the observation room with no further wait for a completely fledged technique in the wireless settings data from the Internet of Things (IoT). The Internet of Everything (IoE) is a concept that extends the Internet of Things. In view of the fact that the wireless nodes are changeable in their environment, those effects lead to unsteadiness and uncertainty in information distribution. Therefore, there is a requirement for flood-predictable region data that may be exaggerated between the source and the control room. In the past, there were a lot of techniques set up and put into practice intended for keeping an eye on the flood spots. However, one of the biggest challenges is to have data sharing without delay and loss of data among source and destination nodes. In addition to that, the video quality also needs to be taken into consideration at the same time in receipt, as it is a tough task to determine and preplan the flood happenings completely from the normal disaster that makes scientific complicatedness more than the information being received in a wireless ad-hoc environment using IoT-based sensors. Considering all the abovementioned reasons, the proposed work comprises of three folded goals, namely, the design of a mobile ad-hoc flooding environment, the development of an urban flood high definition video surveillance system using IoT-based sensors, and experimental work on simulation. [ABSTRACT FROM AUTHOR]

Artificial intelligence is an emerging technology that revolutionizes human lives. Despite the fact that this technology is used in higher education, many professors are unaware of it. In this current scenario, there is a huge need to arise, implement information bridge technology, and enhance communication in the classroom. Through this paper, the authors try to predict the future of higher education with the help of artificial intelligence. This research article throws light on the current education system the problems faced by the subject faculties, students, changing government rules, and regulations in the educational sector. Various arguments and challenges on the implementation of artificial intelligence are prevailing in the educational sector. In this concern, we have built a use case model by using a student assessment data of our students and then built a synthesized using generative adversarial network (GAN). The dataset analyzed, visualized, and fed to different machine learning algorithms such as logistic Regression (LR), linear discriminant analysis (LDA), K-nearest neighbors (KNN), classification and regression trees (CART), naive Bayes (NB), support vector machines (SVM), and finally random forest (RF) algorithm and achieved a maximum accuracy of 58%. This article aims to bridge the gap between human lecturers and the machine. We are also concerned about the psychological emotions of the faculty and the students when artificial intelligence takes control. [ABSTRACT FROM AUTHOR]

IoT-based multi-biometric system is a blend of multiple biometric templates that can be used for user authentication/verification using sensors. The leakage of the biometric trait information may cause critical privacy and security issues. It is expected to protect the privacy details of individuals through the irreversibility, unlinkability, and renewability of multi-biometric templates used in the authentication system. This study presents a robust authentication system with secure multi-biometric template protection techniques based on discrete cosine transform feature transformation and Lagrange's interpolation-based image transformation. Three biometric traits namely iris, fingerprint, and palm print are recorded using sensors to validate the proposed multi-biometric template protection system. The fusion of all traits used is giving an average of 95.42% genuine acceptance rate and an average of 4.57% false rejection rate. Despite any number of biometric templates used for authentication, the proposed image transformation techniques keep the size of the final storage requirement as 8 X 8, which achieves constant space complexity (O(1)). The stored template is not linked with original templates; it is irreversible and renewable as new enrolment of the same individual will produce a new template every time. Overall, the proposed technique provides a secure authentication system with high accuracy, a constant size database, and the privacy preservation of biometric traits. [ABSTRACT FROM AUTHOR]

The brain is the most complex organ in the human body, and it is also the most complex organ in the whole biological system, making it the most complex organ on the planet. According to the findings of current studies, modern study that properly characterises the EEG data signal provides a clear classification accuracy of human activities which is distinct from previous research. Various brain wave patterns related to common activities such as sleeping, reading, and watching a movie may be found in the Electroencephalography (EEG) data that has been collected. As a consequence of these activities, we accumulate numerous sorts of emotion signals in our brains, including the Delta, Theta, and Alpha bands. These bands will provide different types of emotion signals in our brain as a result of these activities. As a consequence of the nonstationary nature of EEG recordings, time-frequency-domain techniques, on the other hand, are more likely to provide good findings. The ability to identify different neural rhythm scales using time-frequency representation has also been shown to be a legitimate EEG marker; this ability has also been demonstrated to be a powerful tool for investigating small-scale neural brain oscillations. This paper presents the first time that a frequency analysis of EEG dynamics has been undertaken. An augmenting decomposition consisting of the "Versatile Inspiring Wavelet Transform" and the "Adaptive Wavelet Transform" is used in conjunction with the EEG rhythms that were gathered to provide adequate temporal and spectral resolutions. Children's wearable sensors are being used to collect data from a number of sources, including the Internet. The signal is conveyed over the Internet of Things (IoT). Specifically, the suggested approach is assessed on two EEG datasets, one of which was obtained in a noisy (i.e., nonshielded) environment and the other was recorded in a shielded environment. The results illustrate the resilience of the proposed training strategy. Therefore, our method contributes to the identification of specific brain activity in children who are taking part in the research as a result of their participation. On the basis of several parameters such as filtering response, accuracy, precision, recall, and F-measure, the MATLAB simulation software was used to evaluate the performance of the proposed system. [ABSTRACT FROM AUTHOR]

Sleep apnea is a serious sleep disorder that occurs when a person's breathing is interrupted during sleep. People with untreated sleep apnea stop breathing repeatedly during their sleep. This study provides an empirical analysis of apnea syndrome using the AI-based Granger panel model approach. Data were collected from the MIT-BIH polysomnographic database (SLPDB). The panel is composed of eighteen patients, while the implementation was done using MATLAB software. The results show that, for the eighteen patients with sleep apnea, there was a significant relationship between ECG-blood pressure (BP), ECG-EEG, and EEG-blood pressure (BP). The study concludes that the long-term interaction between physiological signals can help the physician to understand the risks associated with these interactions. The study would assist physicians to understand the mechanisms underlying obstructive sleep apnea early and also to select the right treatment for the patients by leveraging the potential of artificial intelligence. The researchers were motivated by the need to reduce the morbidity and mortality arising from sleep apnea using AI-enabled technology. [ABSTRACT FROM AUTHOR]

Epileptic patients suffer from an epileptic brain seizure caused by the temporary and unpredicted electrical interruption. Conventionally, the electroencephalogram (EEG) signals are manually studied by medical practitioners as it records the electrical activities from the brain. This technique consumes a lot of time, and the outputs are unreliable. In a bid to address this problem, a new structure for detecting an epileptic seizure is proposed in this study. The EEG signals obtained from the University of Bonn, Germany, and real-time medical records from the Senthil Multispecialty Hospital, India, were used. These signals were disintegrated into six frequency subbands that employed discrete wavelet transform (DWT) and extracted twelve statistical functions. In particular, seven best features were identified and further fed into k-Nearest Neighbor (kNN), naïve Bayes, Support Vector Machine (SVM), and Decision Tree classifiers for two-type and three-type classifications. Six statistical parameters were employed to measure the performance of these classifications. It has been found that different combinations of features and classifiers produce different results. Overall, the study is a first attempt to find the best combination feature set and classifier for 16 different 2-class and 3-class classification challenges of the Bonn and Senthil real-time clinical dataset. [ABSTRACT FROM AUTHOR]

With the advent of computers and their widespread use, cloud computing has been identified as one of the major emerging components of computer technology. The benefits of cloud computing, in the form of processing power and computing resources connected via the internet, have not only bolstered business and personal operations of users but have also led to severe security and privacy threats that require adaptation into cloud computing systems. In light of this, the present study explores the various threats to cloud computing, in addition to outlining defence mechanisms against these threats. It was found that there is a major threat concerning data breaches because of the lack of management understanding of the use of cloud computing services and their defence mechanisms. Furthermore, there can be an abuse of cloud computing services that, in turn, affect not only sensitive data pertaining to the organisation but also the personal identity and information of the user. [ABSTRACT FROM AUTHOR]