Search

Earth abundant metal‐based heterogeneous catalysts with highly active and at the same time stable isolated metal sites constitute a key factor for the advancement of sustainable and cost‐effective chemical synthesis. In particular, the development of more practical, and durable iron‐based materials is of central interest for organic synthesis, especially for the preparation of chemical products related to life science applications. Here, we report the preparation of Fe‐single atom catalysts (Fe‐SACs) entrapped in N‐doped mesoporous carbon support with unprecedented potential in the preparation of different kinds of amines, which represent privileged class of organic compounds and find increasing application in daily life. The optimal Fe‐SACs allow for the reductive amination of a broad range of aldehydes and ketones with ammonia and amines to produce diverse primary, secondary, and tertiary amines including N‐methylated products as well as drugs, agrochemicals, and other biomolecules (amino acid esters and amides) utilizing green hydrogen. [ABSTRACT FROM AUTHOR]

The nature of the support can fundamentally affect the function of a heterogeneous catalyst. For the novel type of isolated metal atom catalysts, sometimes referred to as single‐atom catalysts, systematic correlations are still rare. Here, we report a general finding that Pd on nitride supports (non‐metal and metal nitride) features a higher oxidation state compared to that on oxide supports (non‐metal and metal oxide). Through thorough oxidation state investigations by X‐ray absorption spectroscopy (XAS), X‐ray photoelectron spectroscopy (XPS), CO‐DRIFTS, and density functional theory (DFT) coupled with Bader charge analysis, it is found that Pd atoms prefer to interact with surface hydroxyl group to form a Pd(OH)x species on oxide supports, while on nitride supports, Pd atoms incorporate into the surface structure in the form of Pd−N bonds. Moreover, a correlation was built between the formal oxidation state and computational Bader charge, based on the periodic trend in electronegativity. [ABSTRACT FROM AUTHOR]

Improving the selectivity in the oxidative coupling of methane to ethane/ethylene poses a significant challenge for commercialization. The required improvements are hampered by the uncertainties associated with the reaction mechanism due to its complexity. Herein, we report about 90 % selectivity to the target products at 11 % methane conversion over Gd2O3‐based catalysts at 700 °C using N2O as the oxidant. Sophisticated kinetic studies have suggested the nature of adsorbed oxygen species and their binding strength as key parameters for undesired methane oxidation to carbon oxides. These descriptors can be controlled by a metal oxide promoter for Gd2O3. [ABSTRACT FROM AUTHOR]

Catalytic hydrogenation and oxidative dehydrogenation of N‐heterocycles to produce tetrahydroquinoline and quinoline derivatives are important reactions of particular importance in the agrochemical and pharmaceutical industries. Herein, we report earth‐abundant cobalt nanoparticles supported on hydroxyapatite (HAP) as an inexpensive and efficient catalyst for the hydrogenation and reverse oxidative dehydrogenation of N‐heterocycles. The optimal nanocatalyst exhibits excellent activity in both reactions for a wide range of substrates including (iso)quinolines, acridine, benzo[h]quinoline, quinoxaline and indole. Reactions proceed under relatively mild conditions without requiring any additives. [ABSTRACT FROM AUTHOR]

Heterogeneously catalyzed N‐formylation of amines to formamide with CO2/H2 is highly attractive for the valorization of CO2. However, the relationship of the catalytic performance with the catalyst structure is still elusive. Herein, mixed valence catalysts containing Cu2O/Cu interface sites were constructed for this transformation. Both aliphatic primary and secondary amines with diverse structures were efficiently converted into the desired formamides with good to excellent yields. Combined ex and in situ catalyst characterization revealed that the presence of Cu2O/Cu interface sites was vital for the excellent catalytic activity. Density functional theory (DFT) calculations demonstrated that better catalytic activity of Cu2O/Cu(111) than Cu(111) is attributed to the assistance of oxygen at the Cu2O/Cu interface (Ointer) in formation of Ointer‐H moieties, which not only reduce the apparent barrier of HCOOH formation but also benefit the desorption of the desired N‐formylated amine, leading to high activity and selectivity. [ABSTRACT FROM AUTHOR]

Heterogeneously catalyzed N‐formylation of amines to formamide with CO2/H2 is highly attractive for the valorization of CO2. However, the relationship of the catalytic performance with the catalyst structure is still elusive. Herein, mixed valence catalysts containing Cu2O/Cu interface sites were constructed for this transformation. Both aliphatic primary and secondary amines with diverse structures were efficiently converted into the desired formamides with good to excellent yields. Combined ex and in situ catalyst characterization revealed that the presence of Cu2O/Cu interface sites was vital for the excellent catalytic activity. Density functional theory (DFT) calculations demonstrated that better catalytic activity of Cu2O/Cu(111) than Cu(111) is attributed to the assistance of oxygen at the Cu2O/Cu interface (Ointer) in formation of Ointer‐H moieties, which not only reduce the apparent barrier of HCOOH formation but also benefit the desorption of the desired N‐formylated amine, leading to high activity and selectivity. [ABSTRACT FROM AUTHOR]

The selective hydrogenation of benzofurans in the presence of a heterogeneous non‐noble metal catalyst is reported. The developed optimal catalytic material consists of cobalt‐cobalt oxide core–shell nanoparticles supported on silica, which has been prepared by the immobilization and pyrolysis of cobalt‐DABCO‐citric acid complex on silica under argon at 800 °C. This novel catalyst allows for the selective hydrogenation of simple and functionalized benzofurans to 2,3‐dihydrobenzofurans as well as related heterocycles. The versatility of the reported protocol is showcased by the reduction of selected drugs and deuteration of heterocycles. Further, the stability, recycling, and reusability of the Co‐nanocatalyst are demonstrated. [ABSTRACT FROM AUTHOR]

The synthesis of primary alcohols (from olefins) is an important and challenging transformation, as most of the current methods suffer from regioselectivity issues. This work describes the utilization of rice husk (RH) from agricultural waste as support for the preparation of a catalyst for the conversion of olefin oxides to primary alcohols. The catalyst was synthesized by pyrolysis of RH impregnated with nickel, and characterized by IR, AAS, XRD, BET, XPS, TEM, and TPD technics. The catalyst shows excellent activity and selectivity towards anti‐Markovnikov alcohols, acting simultaneously as Brønsted acid, solid Lewis acid, and as hydrogenation catalyst. A substrate screening was done, the catalyst's recycling stability was assessed, and a plausibly reaction mechanism was proposed. [ABSTRACT FROM AUTHOR]

A heterogeneous single‐atom catalyst (SAC) based on a tiny Cu loading (0.05 wt.%) supported on CeO2−TiO2 (Ce/Ti=0.18) shows very high Cu mass‐normalized CO oxidation activity, 100 % selectivity for CO2 between 60 and 100 °C and essentially no deactivation during 17 h on stream in the preferential oxidation of CO (PROX) at 120 °C. Based on state of the art, this catalyst is among the most active and PROX‐selective catalysts. Employing a combination of ex‐situ and operando methods, we infer that the isolated Cu single sites are incorporated with redox‐active Cu2+−O−Ce4+⇆Cu+−□−Ce3+ moieties connected by labile oxygen and are exposed on the surface of highly dispersed ceria. This high dispersion is promoted by TiO2 which itself does not participate in redox steps during PROX, as Ti ions remain essentially tetravalent while Cu and Ce undergo reversible redox shuttles. [ABSTRACT FROM AUTHOR]

The synthesis and functionalization of nitrogen‐containing compounds continue to be important due to their wide applications. In particular, the preparation of nitriles and amides applying cost‐effective and green methodologies is of central importance because these products represent valuable fine and bulk chemicals and serve as key precursors and central intermediates in organic synthesis and drug discovery as well as materials. Here, the preparation of nitriles and primary amides from alcohols and ammonia by a heterogeneous Cu‐catalyzed aerobic oxidation process is reported. The optimal catalyst for this synthesis is based on supported copper oxide‐nanoparticles, which are prepared by the impregnation and pyrolysis of simple copper nitrate on carbon. Applying these reusable nanoparticles, various simple, substituted, and functionalized aromatic, heterocyclic, and aliphatic nitriles are synthesized starting from inexpensive and easily accessible alcohols and ammonia in the presence of air. In addition, the synthesis of selected primary amides in a water medium is also performed using these Cu nanoparticles. [ABSTRACT FROM AUTHOR]

There is a constant need for deuterium‐labelled products for multiple applications in life sciences and beyond. Here, a new class of heterogeneous catalysts is reported for practical deuterium incorporation in anilines, phenols, and heterocyclic substrates. The optimal material can be conveniently synthesised and allows for high deuterium incorporation using deuterium oxide as isotope source. This new catalyst has been fully characterised and successfully applied to the labelling of natural products as well as marketed drugs. [ABSTRACT FROM AUTHOR]

Highly active and coking‐resistant Ni catalysts suited for the dry reforming of CH4‐rich gases (70 vol %, e. g. biogas or sour natural gas) were prepared starting from a Mg‐rich Mg−Al hydrotalcite support precursor. Calcination at 1000 °C yields two phases, MgO and MgAl2O4 spinel. Complexation‐deposition of Ni with citric acid on the preformed support as well as lanthanum addition yields a catalyst with remarkably low carbon accumulation over 100 h on stream attributed to both high Ni dispersion and preferred interactions of Ni with MgO on MgAl2O4. [ABSTRACT FROM AUTHOR]

Hydroformylation of olefins has been studied in the presence of specific heterogeneous cobalt nanoparticles. The catalytic materials were prepared by pyrolysis of preformed cobalt complexes deposited onto different inorganic supports. Atomic absorption spectroscopy (AAS) measurements indicated a correlation of catalyst activity and cobalt leaching as well as a strong influence of the heterogeneous support on the productivity. These new, low‐cost, easy‐to‐handle catalysts can substitute more toxic, unstable and volatile cobalt carbonyl complexes for hydroformylations on a laboratory scale. Co catalysis: A new class of low‐cost, easy‐to‐handle materials for lab‐scale hydroformylation is reported. The pyrolysis of preformed Co complexes deposited onto inorganic supports resulted in immobilised cobalt nanoparticles for oxo synthesis. The most active materials Co/phen@TiO2 and Co/phen@C represent convenient reservoirs for active homogeneous cobalt species, and thus can substitute the common, but toxic, dicobaltoctacarbonyl complex. [ABSTRACT FROM AUTHOR]

Abstract: A combined experimental and theoretical investigation of Ag‐Pt sub‐nanometer clusters as heterogeneous catalysts in the CO→CO2 reaction (COox) is presented. Ag9Pt2 and Ag9Pt3 clusters are size‐selected in the gas phase, deposited on an ultrathin amorphous alumina support, and tested as catalysts experimentally under realistic conditions and by first‐principles simulations at realistic coverage. In situ GISAXS/TPRx demonstrates that the clusters do not sinter or deactivate even after prolonged exposure to reactants at high temperature, and present comparable, extremely high COox catalytic efficiency. Such high activity and stability are ascribed to a synergic role of Ag and Pt in ultranano‐aggregates, in which Pt anchors the clusters to the support and binds and activates two CO molecules, while Ag binds and activates O2, and Ag/Pt surface proximity disfavors poisoning by CO or oxidized species. [ABSTRACT FROM AUTHOR]

Highlights from the article: Cover Feature: Heterogeneously Catalysed Oxidative Dehydrogenation of Menthol in a Fixed-Bed Reactor in the Gas Phase (ChemistryOpen 8/2019) Keywords: oxidative dehydrogenation; gas-phase reactions; supported silver catalyst; supported copper catalyst; supported ruthenium catalyst Oxidative dehydrogenation, gas-phase reactions, supported silver catalyst, supported copper catalyst, supported ruthenium catalyst.

Heterogeneously catalyzed N‐formylation of amines to formamide with CO2/H2 is highly attractive for the valorization of CO2. However, the relationship of the catalytic performance with the catalyst structure is still elusive. Herein, mixed valence catalysts containing Cu2O/Cu interface sites were constructed for this transformation. Both aliphatic primary and secondary amines with diverse structures were efficiently converted into the desired formamides with good to excellent yields. Combined ex and in situ catalyst characterization revealed that the presence of Cu2O/Cu interface sites was vital for the excellent catalytic activity. Density functional theory (DFT) calculations demonstrated that better catalytic activity of Cu2O/Cu(111) than Cu(111) is attributed to the assistance of oxygen at the Cu2O/Cu interface (Ointer) in formation of Ointer‐H moieties, which not only reduce the apparent barrier of HCOOH formation but also benefit the desorption of the desired N‐formylated amine, leading to high activity and selectivity. [ABSTRACT FROM AUTHOR]

Heterogeneously catalyzed N‐formylation of amines to formamide with CO2/H2 is highly attractive for the valorization of CO2. However, the relationship of the catalytic performance with the catalyst structure is still elusive. Herein, mixed valence catalysts containing Cu2O/Cu interface sites were constructed for this transformation. Both aliphatic primary and secondary amines with diverse structures were efficiently converted into the desired formamides with good to excellent yields. Combined ex and in situ catalyst characterization revealed that the presence of Cu2O/Cu interface sites was vital for the excellent catalytic activity. Density functional theory (DFT) calculations demonstrated that better catalytic activity of Cu2O/Cu(111) than Cu(111) is attributed to the assistance of oxygen at the Cu2O/Cu interface (Ointer) in formation of Ointer‐H moieties, which not only reduce the apparent barrier of HCOOH formation but also benefit the desorption of the desired N‐formylated amine, leading to high activity and selectivity. [ABSTRACT FROM AUTHOR]

A heterogeneous single‐atom catalyst (SAC) based on a tiny Cu loading (0.05 wt.%) supported on CeO2−TiO2 (Ce/Ti=0.18) shows very high Cu mass‐normalized CO oxidation activity, 100 % selectivity for CO2 between 60 and 100 °C and essentially no deactivation during 17 h on stream in the preferential oxidation of CO (PROX) at 120 °C. Based on state of the art, this catalyst is among the most active and PROX‐selective catalysts. Employing a combination of ex‐situ and operando methods, we infer that the isolated Cu single sites are incorporated with redox‐active Cu2+−O−Ce4+⇆Cu+−□−Ce3+ moieties connected by labile oxygen and are exposed on the surface of highly dispersed ceria. This high dispersion is promoted by TiO2 which itself does not participate in redox steps during PROX, as Ti ions remain essentially tetravalent while Cu and Ce undergo reversible redox shuttles. [ABSTRACT FROM AUTHOR]