Search

Li metal is regarded as the "Holy Grail" in the next generation of anode materials due to its high theoretical capacity and low redox potential. However, sluggish Li ions interfacial transport kinetics and uncontrollable Li dendrites growth limit practical application of the energy storage system in high‐power device. Herein, separators are modified by the addition of a coating, which spontaneously grafts onto the Li anode interface for in situ lithiation. The resultant alloy possessing of strong electron‐donating property promotes the decomposition of lithium bistrifluoromethane sulfonimide in the electrolyte to form a LiF‐rich alloy‐doped solid electrolyte interface (SEI) layer. High ionic alloy solid solution diffusivity and electric field dispersion modulation accelerate Li ions transport and uniform stripping/plating, resulting in a high‐power dendrite‐free Li metal anode interface. Surprisingly, the formulated SEI layer achieves an ultra‐long cycle life of over 8000 h (20,000 cycles) for symmetric cells at a current density of 10 mA cm−2. It also ensures that the NCM(811)//PP@Au//Li full cell at ultra‐high currents (40 C) completes the charging/discharging process in only 68 s to provide high capacity of 151 mAh g−1. The results confirm that this scalable strategy has great development potential in realizing high power dendrite‐free Li metal anode. [ABSTRACT FROM AUTHOR]

Understanding the functional dynamics of neural oscillations in the sensory thalamus is essential for elucidating the perception and modulation of neuropathic pain. Local field potentials were recorded from the sensory thalamus of twelve neuropathic pain patients. Single and combinational neural states were defined by the activity state of a single or paired oscillations. Relationships between the duration or occurrence rate of neural state and pre‐operative pain level or pain relief induced by deep brain stimulation were evaluated. Results showed that the occurrence rate of the single neural state of low‐beta oscillation was significantly correlated with pain relief. The duration and occurrence rate of combinational neural states of the paired low‐beta with delta, theta, alpha, high‐beta or low‐gamma oscillations were more significantly correlated with pain relief than the single neural states. Moreover, these significant combinational neural states formed a local oscillatory network with low‐beta oscillation as a key node. The results also showed correlations between measures of combinational neural states and subjective pain level as well. The duration of combinational neural states of paired alpha with delta or theta oscillations and the occurrence rate of neural states of the paired delta with low‐beta or low‐gamma oscillations were significantly correlated with pre‐operative pain level. In conclusion, this study revealed that the integration of oscillations and the functional dynamics of neural states were differentially involved in modulation and perception of neuropathic pain. The functional dynamics could be biomarkers for developing neural state‐dependent deep brain stimulation for neuropathic pain. [ABSTRACT FROM AUTHOR]

Electrocatalytic oxidation of C−H bonds in hydrocarbons represents an efficient and sustainable strategy for the synthesis of value‐added chemicals. Herein, a highly selective and continuous‐flow electrochemical oxidation process of toluene to various oxygenated products (benzyl alcohol, benzaldehyde, and benzyl acetate) is developed with the electrocatalytic membrane electrodes (ECMEs). The selectivity of target products can be manipulated via surface and interface engineering of Co3O4‐based electrocatalysts. We achieved a high benzaldehyde selectivity of 90 % at a toluene conversion of 47.6 % using 1D Co3O4 nanoneedles (NNs) loaded on a microfiltration (MF) titanium (Ti) membrane, i.e, Co3O4 NNs/Ti. In contrast, the main product shifted to benzyl alcohol with a selectivity of 90.1 % at a conversion of 32.1 % after modifying MnO2 nanosheets (NSs) on Co3O4 NNs/Ti (Co3O4@MnO2/Ti) catalyst. Moreover, benzyl acetate product can be obtained with a selectivity of 92 % at a conversion of 58.5 % at high current density (>1.5 mA cm−2), demonstrating that the pathway of toluene oxidation is readily maneuvered. DFT results reveal that modifying MnO2 on Co3O4 optimizes the electron structure of Co3O4@MnO2/Ti and modulates the adsorption behavior of intermediate species. This work demonstrates a sustainable, efficient, and continuous‐flow process for precise control over the production selectivity of value‐added oxygenated derivatives in the electrochemical oxidation of aromatic hydrocarbons. [ABSTRACT FROM AUTHOR]