Search

Purpose: The treatment of brain tumors in pregnant patients poses challenges, as the out‐of‐field dose exposure to the fetus can potentially be harmful. A pregnant patient with prior radiation treatment was presented with a brain tumor at our clinic. This work reports on our pre‐treatment study that compared fetal dose exposure between intensity‐modulated proton therapy (IMPT) using pencil beam scanning (PBS) and conventional photon 3D conformal radiation therapy (3DCRT) and volumetric‐modulated arc therapy (VMAT), and the subsequent pregnant patient's radiation treatment. Materials and methods: Pre‐treatment measurements of clinical plans, 3DCRT, VMAT, and IMPT, were conducted on a phantom. Measurements were performed using a device capable of neutron detections, closely following AAPM guidelines, TG158. For photon measurements, fetus shielding was utilized. On patient treatment days, which was determined to be proton treatment, shielding was used only during daily imaging for patient setup. Additionally, an in vivo measurement was conducted on the patient. Results: Measurements showed that IMPT delivered the lowest fetal dose, considering both photon and neutron out‐of‐field doses to the fetus, even when shielding was implemented for photon measurements. Additionally, the proton plans demonstrated superior treatment for the mother, a reirradiation case. Conclusion: The patient was treated with proton therapy, and the baby was subsequently delivered at full term with no complications. This case study supports previous clinical findings and advocates for the expanded use of proton therapy in this patient population. [ABSTRACT FROM AUTHOR]

Purpose: To design a patient specific quality assurance (PSQA) process for the CyberKnife Synchrony system and quantify its dosimetric accuracy using a motion platform driven by patient tumor traces with rotation. Methods: The CyberKnife Synchrony system was evaluated using a motion platform (MODUSQA) and a SRS MapCHECK phantom. The platform was programed to move in the superior‐inferior (SI) direction based on tumor traces. The detector array housed by the StereoPhan was placed on the platform. Extra rotational angles in pitch (head down, 4.0° ± 0.15° or 1.2° ± 0.1°) were added to the moving phantom to examine robot capability of angle correction during delivery. A total of 15 Synchrony patients were performed SBRT PSQA on the moving phantom. All the results were benchmarked by the PSQA results based on static phantom. Results: For smaller pitch angles, the mean gamma passing rates were 99.75% ± 0.87%, 98.63% ± 2.05%, and 93.11% ± 5.52%, for 3%/1 mm, 2%/1 mm, and 1%/1 mm, respectively. Large discrepancy in the passing rates was observed for different pitch angles due to limited angle correction by the robot. For larger pitch angles, the corresponding mean passing rates were dropped to 93.00% ± 10.91%, 88.05% ± 14.93%, and 80.38% ± 17.40%. When comparing with the static phantom, no significant statistic difference was observed for smaller pitch angles (p = 0.1 for 3%/1 mm), whereas a larger statistic difference was observed for larger pitch angles (p < 0.02 for all criteria). All the gamma passing rates were improved, if applying shift and rotation correction. Conclusions: The significance of this work is that it is the first study to benchmark PSQA for the CyberKnife Synchrony system using realistically moving phantoms with rotation. With reasonable delivery time, we found it may be feasible to perform PSQA for Synchrony patients with a realistic breathing pattern. [ABSTRACT FROM AUTHOR]

The purpose of the study was to introduce and evaluate a high‐resolution diode array for patient‐specific quality assurance (PSQA) of CyberKnife brain stereotactic radiosurgery (SRS) and stereotactic radiotherapy (SRT). Thirty‐three intracranial plans were retrospectively delivered on the SRS MapCHECK using fixed cone, Iris, and multileaf collimator (MLC). The plans were selected to cover a range of sites from large tumor bed, single/multiple small brain metastases (METs) to trigeminal neuralgia. Fiducial tracking using the four fiducials embedded around the detector plane was used as image guidance. Results were analyzed before and after registration based on absolute dose gamma criterion of 1 mm distance‐to‐agreement and 0.5%–3% dose‐difference. Overall, the gamma passing rates (1 mm and 3% criterion) before registration for all the patients were above 90% for all three treatment modalities (96.8 ± 3.5%, the lowest passing rate of 90.4%), and were improved after registration (99.3 ± 1.5%). When tighter criteria (1 mm and 2%) were applied, the gamma passing rates after registration for all the cases dropped to 97.3 ± 3.2%. For trigeminal neuralgia cases, we applied 1 mm and 0.5% criterion and the passing rates dropped from 100 ± 0.0% to 98.5 ± 2.0%. The mean delivery time was 33.4 ± 11.7 min, 24.0 ± 4.9 min, and 17.1 ± 2.6 min for the fixed cone, Iris, and MLC, respectively. With superior gamma passing rates and reasonable quality assurance (QA) time, we believe the SRS MapCHECK could be a good option for routine PSQA for CyberKnife SRS/SRT. [ABSTRACT FROM AUTHOR]

The impact of selection of prescription isodose line (IDL) on plan quality has not been well evaluated during inverse planning (IP). In this study, a total of 180 IP plans at five levels of IDL were generated for 30 brain metastases (BMs). For each BM, one round of IP was performed with typical IP settings, followed by a quick fine‐tuning to ensure the same target coverage and comparable conformality index. The impact of the IDL on the quality metrics (selectivity, gradient index [GI], and treatment time) was evaluated. The decrease of selectivity and increase of GI meant inferior target dose conformality and more dose spillage. Additionally, a metric directly correlated to the treatment time was proposed. For all cases, the mean GI decreased monotonically as IDL decreased from 70% to 30%, and the decreasing rate was significantly different based on tumor size. The mean selectivity and number of shots decreased monotonically as IDL decreased for all the tumors. From 70% to 30% IDL, the decreasing rate of the mean selectivity was 2.8% (p = 0.020), 7.7% (p = 0.005), and 15.4% (p = 0.020) and that of the number of shots was 75.4% (p = 0.001), 73.2% (p = 0.001), and 50.7% (p = 0.009), for the large, medium, and small tumors, respectively. For the medium and small tumor groups, the mean treatment time increased monotonically when IDLs decreased (increasing rate was 80.0% [p = 0.002] for medium tumors [p = 0.001] and 130.8% [p = 0.001] for small tumors from 70% to 30%). For the large tumors, the mean treatment time was the shortest at 50% IDL (59.0 min) and higher at 70% (65.9 min) and 30% (71.9 min). Overall, the GammaPlan chose smaller sectors for plans with lower IDLs except for the large size group. [ABSTRACT FROM AUTHOR]

Abstract: Purpose: Two different respiratory monitoring systems (Varian's Real‐Time Position Management (RPM) System and Siemens’ ANZAI belt Respiratory Gating System) are compared in the context of respiratory signals and 4D CT images that are accordingly reconstructed. This study aims to evaluate the feasibility of combined use of RPM and ANZAI systems for 4DCT simulation and gated radiotherapy treatment, respectively. Methods: The RPM infrared reflecting marker and the ANZAI belt pressure sensor were both placed on the patient's abdomen during 4DCT scans. The respiratory signal collected by the two systems was synchronized. Fifteen patients were enrolled for respiratory signal collection and analysis. The discrepancies between the RPM and ANZAI traces can be characterized by phase shift and shape distortion. To reveal the impact of the changes in respiratory signals on 4D images, two sets of 4D images based on the same patient's raw data were reconstructed using the RPM and ANZAI data for phase sorting, respectively. The volume of whole lung and the position of diaphragm apex were measured and compared for each respiratory phase. Results: The mean phase shift was measured as 0.2 ± 0.1 s averaged over 15 patients. The shape of the breathing trace was found to be in disagreement. For all the patients, the ANZAI trace had a steeper falloff in exhalation than RPM. The inhalation curve, however, was matched for nine patients, steeper in ANZAI for five patients and steeper in RPM for one patient. For 4D image comparison, the difference in whole‐lung volume was about −4% to +4% and the difference in diaphragm position was about −5 mm to +4 mm, compared in each individual phase and averaged over seven patients. Conclusions: Combined use of one system for 4D CT simulation and the other for gated treatment should be avoided as the resultant gating window would not fully match with each other due to the remarkable discrepancy in breathing traces acquired by the two different surrogate systems. [ABSTRACT FROM AUTHOR]

Purpose There is no consensus on the optimal prescription isodose line ( IDL) in CyberKnife ( CK) SRS. We designed a strategy to search for optimal CK plans at different levels of IDLs and investigated the dosimetric impact on the quality of CK plans. Methods and materials The retrospective study consisted of 13 CK patients with 16 brain tumors. The mean volume and size of the tumors was 9.7 ± 10.4 cc and 30.3 ± 10.9 mm, respectively. Four shells were created at distances of 2-3 mm to 60 mm from the target. The constraint dose of the innermost shell (D1) was the primary optimization parameter. For isolated brain tumors, D1 started from the prescription dose and gradually reduced after optimization started over. The optimal plans were reached when the coverage started to degrade and the desired IDL was achieved. For eight tumors abutting an OAR, both the D1 and constraint dose to the OAR were gradually pushed until an optimal plan was reached for the desired IDL. Results For the isolated tumors, the V5 Gy, V10 Gy, V15 Gy, V20 Gy, and V25 Gy of low IDL (49.6 ± 2.1%) plans were on average 23.6%, 28.6%, 33.8%, 26.2%, and 10.6% lower, respectively, comparing to the high IDL (88.6 ± 1.3%) plans. The Conformality Index ( CI) of the low IDL plans outperformed the high IDL plans (mean: 1.15 vs. 1.24), except for a lesion under 0.5 cc. The quality of the middle IDL plans (69.6 ± 1.5%) was close to the low IDL plans. Similar results were observed for tumors abutting an OAR. Conclusions Low IDL plans outperformed high IDL plans for all metrics in tumors > 0.5 cc. The lower dose exposure of normal brain tissue and better CI could potentially reduce radiation necrosis while the higher maximum dose could improve local control. [ABSTRACT FROM AUTHOR]

Purpose: To investigate whether the three-dimensional cone-beam CT (CBCT) is clinically equivalent to the four-dimensional computed tomography (4DCT) maximum intensity projection (MIP) reconstructed images for internal target volume (ITV) localization in image-guided lung stereotactic radiotherapy. Methods: A ball-shaped polystyrene phantom with built-in cube, sphere, and cone of known volumes was attached to a motor-driven platform, which simulates a sinusoidal movement with changeable motion amplitude and frequency. Target motion was simulated in the patient in a superior-inferior (S-I) direction with three motion periods and 2 cm peak-to-peak amplitudes. The Varian onboard Exact-Arms kV CBCT system and the GE LightSpeed four-slice CT integrated with the respiratory-position-management 4DCT scanner were used to scan the moving phantom. MIP images were generated from the 4DCT images. The clinical equivalence of the two sets of images was evaluated by comparing the extreme locations of the moving objects along the motion direction, the centroid position of the ITV, and the ITV volumes that were contoured automatically by Velocity or calculated with an imaging gradient method. The authors compared the ITV volumes determined by the above methods with those theoretically predicted by taking into account the physical object dimensions and the motion amplitudes. The extreme locations were determined by the gradient method along the S-I axis through the center of the object. The centroid positions were determined by autocenter functions. The effect of motion period on the volume sizes was also studied. Results: It was found that the extreme locations of the objects determined from the two image modalities agreed with each other satisfactorily. They were not affected by the motion period. The average difference between the two modalities in the extreme locations was 0.68% for the cube, 1.35% for the sphere, and 0.5% for the cone, respectively. The maximum difference in the centroid position of the cylinder, sphere, and cone was less than 1.4 mm between the two modalities for all motion periods studied. For the ITV volume evaluation, the authors found that both MIP-based and CBCT-based ITVs increased with increases of motion period. Furthermore, the MIP-based ITV volumes were generally larger than those determined from the CBCT images, with the difference in autocontoured volumes being 2.57%, 1.66%, and 1.82% for the sphere, cylinder, and cone, respectively, while these differences increased to 9.57%, 3.52%, 8.71% for the above objects when the gradient method was used. The authors found that the autocontour method was accurate enough to predict the actual ITV values with the absolute differences less than 2.4% comparing to the theoretically predicted values. Conclusions: The extreme location and the centroid position of the objects agree with each other between the two image modalities when the breathing motion is sinusoidal. Although the ITV volumes delineated from both image modalities changed with the motion period, the differences in ITV between the two modalities were minimal when an optimized window level was used. The authors' results suggest that CBCT and MIP images are equivalent in determining an ITV's position in the conditions studied. The CBCT is adequate in providing imaging-guidance for lung cancer treatment. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the dosimetric feasibility of accelerated partial breast irradiation (APBI) using CyberKnife. Methods: Fourteen previously treated patients with early-stage breast cancer were selected for a retrospective study. Six of these patients had been treated to 38.5 Gy in 10 fractions in a phase III accelerated partial breast trial and the rest of the patients were treated to 50.4 Gy in 28 fractions. In this planning study, the guidelines in the protocol for the phase III partial breast trial were followed for organ delineation and CyberKnife planning. The achievable dosimetric parameters from all CyberKnife plans were compared to Intensity-modulated radiation therapy (IMRT) and 3D-CRT methods. The reproducibility of the dose delivery with and without respiratory motion was assessed through delivering a patient plan to a breast phantom. Different dose calculation algorithms were also compared between ray tracing and Monte Carlo. Results: For all the patients in the study, the dosimetric parameters met the guidelines from the NSABP B39/RTOG 0413 protocol strictly. The mean PTV volume covered by 100% of the prescription dose was 95.7 ± 0.7% (94.7%-97.1%). The mean maximal dose was 104 ± 2% of the prescription dose. The mean V50% and mean V100% to the ipsilateral normal breast were 23.1 ± 11.6% and 9.0 ± 5.8%, respectively. The conformity index of all plans was 1.14 ± 0.04. The maximum dose to the contralateral breast varied from 1.3 cGy to 111 cGy. The mean V5% and mean V30% to the contralateral and ipsilateral lungs were 1.0 ± 1.6% and 1.3 ± 1.2%, respectively. In our study, the mean V5% to the heart was 0.2 ± 0.5% for right-sided tumors and 9.4 ± 10.1% for left-sided tumors. Compared with IMRT and 3D-CRT planning, the PTV coverage from CyberKnife planning was the highest, and the ratio of V20% to V100% of the breast from CyberKnife planning was the smallest. The heart and lung doses were similar in all the techniques except that the V5% for the lung and heart in CyberKnife planning was slightly higher. Conclusions: The dosimetric feasibility of APBI using CyberKnife was investigated in this retrospective study. All the dosimetric parameters strictly met the guidelines from the NSABP B39/RTOG 0413 protocol. With advanced real-time tracking capability, CyberKnife should provide better target coverage and spare nearby critical organs for APBI treatment. [ABSTRACT FROM AUTHOR]