Search

Electronic immunosensors are indispensable tools for diagnostics, particularly in scenarios demanding immediate results. Conventionally, these sensors rely on the chemical immobilization of antibodies onto electrodes. However, globular proteins tend to adsorb and unfold on these surfaces. Therefore, self‐assembled monolayers (SAMs) of thiolated alkyl molecules are commonly used for indirect gold–antibody coupling. Here, a limitation associated with SAMs is revealed, wherein they curtail the longevity of protein sensors, particularly when integrated into the state‐of‐the‐art transducer of organic bioelectronics—the organic electrochemical transistor. The SpyDirect method is introduced, generating an ultrahigh‐density array of oriented nanobody receptors stably linked to the gold electrode without any SAMs. It is accomplished by directly coupling cysteine‐terminated and orientation‐optimized spyTag peptides, onto which nanobody‐spyCatcher fusion proteins are autocatalytically attached, yielding a dense and uniform biorecognition layer. The structure‐guided design optimizes the conformation and packing of flexibly tethered nanobodies. This biolayer enhances shelf‐life and reduces background noise in various complex media. SpyDirect functionalization is faster and easier than SAM‐based methods and does not necessitate organic solvents, rendering the sensors eco‐friendly, accessible, and amenable to scalability. SpyDirect represents a broadly applicable biofunctionalization method for enhancing the cost‐effectiveness, sustainability, and longevity of electronic biosensors, all without compromising sensitivity. [ABSTRACT FROM AUTHOR]

The organic electrochemical transistor (OECT) is one of the most versatile building blocks within the bioelectronics device toolbox. While p‐type organic semiconductors have progressed as OECT channel materials, only a few n‐type semiconductors have been reported, precluding the development of advanced sensor‐integrated OECT‐based complementary circuits. Herein, green aldol polymerization is uses to synthesize lactone‐based n‐type conjugated polymers. Fluorination of the lactone‐based acceptor endows a fully locked backbone with a low‐lying lowest unoccupied molecular orbital, facilitating efficient ionic‐to‐electronic charge coupling. The resulting polymer has a record‐high n‐type OECT performance with a high product of mobility and capacitance (µC* = 108 F cm−1 V−1 s−1), excellent mobility (0.912 cm2 V−1 s−1), low threshold voltage (0.02 V), and fast switching speed (τON, τOFF = 336 µs,108 µs). This work demonstrates two types of device architectures and applications enabled by the high performance of this n‐type OECT, i.e., an artificial synapse and a complementary amplifier for detecting α‐synuclein, a potential biomarker of Parkinson's disease. This study shows that materials that enable high gain and fast speed n‐type OECTs can be developed via a green polymerization route, and the diverse form factors that these devices take promise for exploration of other application areas. [ABSTRACT FROM AUTHOR]

The organic photodiode (OPD) is a promising building block for solution‐processable, flexible, lightweight, and miniaturized photodetectors, ideal for wearable applications. Despite the advances in materials used in OPDs, their photocurrent and light responsivity are limited, and alternative methods are required to boost the signal response. Herein, a miniaturized organic electrochemical transistor (OECT) is integrated with an OPD module to unlock the potential of OPDs to acquire physiological signals. In this integrated photodetector (IPD) system, the light intensity regulates the OPD voltage output that modulates the OECT channel current. The high transconductance of the OECT provides efficient voltage‐to‐current conversion, enhancing the signal‐to‐noise ratio on the sensing site. A microscale, p‐type enhancement‐mode OECT with high gm and fast switching speed performs better in this application than depletion‐mode OECT of the same geometry. The IPD achieves a photocurrent and responsivity 318 and 140 times higher than the standalone OPD, respectively. It is shown that with the IPD, the amplitude of the photoplethysmogram signals detected by the OPD is enhanced by a factor of 2.9 × 103, highlighting its potential as a wearable biosensor and to detect weak, often uncaptured, light‐based signals from living systems. [ABSTRACT FROM AUTHOR]

The integration of n‐type (electron‐transporting) polymers with oxidase enzymes has allowed building high‐performance organic electrochemical transistor (OECT) based metabolite sensors. Yet, the operation mechanism of these devices is poorly understood. Here, the process is investigated for the conversion of metabolite oxidation to electrical current in an n‐type organic electrochemical transistor (n‐OECT). By monitoring oxygen (O2), hydrogen peroxide, and pH changes in the electrolyte as well as the potential of each electrical contact of the n‐OECT during glucose detection, light is shed on the physical phenomena occurring at the polymer‐enzyme interface. It is shown that the n‐type film performs O2 reduction reaction in its doped state and that the n‐OECT characteristics are sensitive to O2. A correlation is found between the consumption of electrolyte‐dissolved O2 and the generation of n‐OECT current during the metabolite oxidation. The results demonstrate how the sensitivity of a polymer to O2, species known to deteriorate the performance of many semiconductor devices, becomes a feature to exploit in sensor applications. The importance of in operando analysis of the electrolyte composition and the terminal potentials is highlighted for understanding the operation mechanism of bioelectronic devices and for sensor design and materials development. [ABSTRACT FROM AUTHOR]

AC electrothermal (ET) flow is inevitable for microfluidic systems dissipating electric energy in a conducting medium. Therefore, many practical applications of biomicrofluidics are prone to ET flow. Here, a series of observations are reported on ET flow in a microfluidic chamber that houses three electrode pairs. The observations indicate that the variations in liquid conductivity and channel height critically impact the structure and magnitude of the flow field. Observations indicate that after a critical conductivity a global ET flow is present in the chamber, while at lower conductivities a vortex is present at every electrode edge. In addition, no ET flow is observed when the chamber height is kept below a critical value at physiological conductivity (∼1.5 S/m). The experimental observations are compared with the numerical simulations of ET flow. The validity of the assumptions made in the current AC ET flow theory is also discussed in the light of the experimental data. The observations can be critical while designing microfluidic systems that involve power dissipation in conductive fluids. [ABSTRACT FROM AUTHOR]