Search

Solar‐driven interfacial evaporation is a promising technology for freshwater production from seawater, but salt accumulation on the evaporator surface hinders its performance and sustainability. In this study, we report a simple and green strategy to fabricate a three‐dimensional porous graphene spiral roll (3GSR) that enables highly efficient solar evaporation, salt collection, and water production from near‐saturated brine with zero liquid discharge (ZLD). The 3GSR design facilitates energy recovery, radial brine transport, and directional salt crystallization, thereby resulting in an ultrahigh evaporation rate of 9.05 kg m−2 h−1 in 25 wt% brine under 1‐sun illumination for 48 h continuously. Remarkably, the directional salt crystallization on its outer surface not only enlarges the evaporation area but also achieves an ultrahigh salt collection rate of 2.92 kg m−2 h−1, thus enabling ZLD desalination. Additionally, 3GSR exhibits a record‐high water production rate of 3.14 kg m−2 h−1 in an outdoor test. This innovative solution offers a highly efficient and continuous solar desalination method for water production and ZLD brine treatment, which has great implications for addressing global water scarcity and environmental issues arising from brine disposal. [ABSTRACT FROM AUTHOR]

Solar desalination is a promising strategy to utilize solar energy to purify saline water. However, the accumulation of salt on the solar evaporator surface severely reduces light absorption and evaporation performance. Herein, a simple and eco‐friendly method to fabricate a 3D gradient graphene spiral sponge (GGS sponge) is presented that enables high‐rate solar evaporation and zero liquid discharge (ZLD) desalination of high‐salinity brine. The spiral structure of the GGS sponge enhances energy recovery, while the gradient network structures facilitate radial brine transport and directional salt crystallization, which cooperate to endow the sponge with superior solar evaporation (6.5 kg m−2 h−1 for 20 wt.% brine), efficient salt collection (1.5 kg m−2 h−1 for 20 wt.% brine), ZLD desalination, and long‐term durability (continuous 144 h in 20 wt.% brine). Moreover, the GGS sponge shows an ultrahigh freshwater production rate of 3.1 kg m−2 h−1 during the outdoor desalination tests. A continuous desalination–irrigation system based on the GGS sponge for crop growth, which has the potential for self‐sustainable agriculture in remote areas is demonstrated. This work introduces a novel evaporator design and also provides insight into the structural principles for designing next‐generation solar desalination devices that are salt‐tolerant and highly efficient. [ABSTRACT FROM AUTHOR]

Global climate change has posed widespread challenges to the ecological process critical to the fitness of many wild organisms, such as reproductive phenology. Many bird species have advanced their reproductive phenology in response to the increases in spring temperatures. However, the mechanism of how climate influences the timing of breeding is still often unclear in many species. We explored the relationship between the timing of breeding and spring temperatures based on 14 years of data on hair‐crested drongos Dicrurus hottentottus in the wild. By applying a 'sliding window' approach, we aimed to identify the time window and weather variable that best explains the timing of breeding at both population and individual levels. We found that the more nights with a minimum temperature below 17°C, around three weeks earlier than the peak reproduction, delayed the breeding time. Low night temperatures may force females to allocate more energy to thermoregulation and therefore physiologically constrain egg‐laying. Although annual minimum and maximum temperatures have increased over the study period, the timing of breeding showed no trend as there was no change in the number of low‐temperature nights in the relevant period across years. The repeatability of the laying date for individual females (R = 0.211) and across the years (R = 0.270) were low indicating that drongos were flexible in adjusting their breeding phenology to environmental variation. These results suggest an effect of low night temperature on avian breeding phenology. This effect may apply commonly across bird species considering shared physiological constraints. [ABSTRACT FROM AUTHOR]

Superelastic, arbitrary‐shaped, and 3D assembled clay/graphene aerogels (CGAs) are fabricated using commercial foam as sacrificial skeleton. The CGAs possess superelasticity under compressive strain of 95% and compressive stress of 0.09–0.23 MPa. The use of clay as skeletal support significantly reduces the use of graphene by 50%. The hydrophobic CGAs show high solvent absorption capacity of 186–519 times its own weight. Moreover, both the compression and combustion methods can be adopted for reusing the CGAs. In particular, it is demonstrated a design of 3D assembled hydrophilic CGA equipped with salt collection system for continuous solar desalination. Due to energy recovery and brine transport management promoted by this design, the 3D assembled CGA system exhibits an extremely high evaporation rate of 4.11 kg m−2 h−1 and excellent salt‐resistant property without salt precipitation even in 20 wt% brine for continuous 36 h illumination (1 kW m−2), which is the best reported result from the solar desalination devices. More importantly, salts can be collected conveniently by squeezing and drying the solution out of the salt collection system. The work provides new insights into the design of 3D assembled CGAs and advances their applications in continuous solar desalination and efficient oil/organic solvent adsorption. [ABSTRACT FROM AUTHOR]

Xylitol is a salutary sugar substitute that has been widely used in the food, pharmaceutical, and chemical industries. Co‐fermentation of xylose and glucose by metabolically engineered cell factories is a promising alternative to chemical hydrogenation of xylose for commercial production of xylitol. Here, we engineered a mutant of SecY protein‐translocation channel (SecY [ΔP]) in xylitol‐producing Escherichia coli JM109 (DE3) as a passageway for xylose uptake. It was found that SecY (ΔP) channel could rapidly transport xylose without being interfered by XylB‐catalyzed synthesis of xylitol‐phosphate, which is impossible for native XylFGH and XylE transporters. More importantly, with the coaction of SecY (ΔP) channel and carbon catabolite repression (CCR), the flux of xylose to the pentose phosphate (PP) pathway and the xylitol synthesis pathway in E. coli could be automatically controlled in response to glucose, thereby ensuring that the mutant cells were able to fully utilize sugars with high xylitol yields. The E. coli cell factory developed in this study has been proven to be applicable to a broad range of xylose‐glucose mixtures, which is conducive to simplifying the mixed‐sugar fermentation process for efficient and economical production of xylitol. [ABSTRACT FROM AUTHOR]

Solar‐driven vapor generation is one of the most promising techniques for seawater desalination, which has attracted broad attention. However, a significant challenge remains for achieving a low‐cost and easy‐to‐manufacture solar‐driven steam generation device with higher evaporation efficiency, excellent mechanical performance, and good durability. Herein, a simple and cost‐effective method is developed to prepare graphene/cellulose nanocrystals (CNCs) lamella network (GCLN) with melamine foam (MF) as the skeleton. Due to the excellent light absorption properties of graphene and excellent hydrophilic properties of CNCs, GCLN exhibits an evaporation rate of 1.66 kg m−2 h−1 and an evaporation efficiency of 97.5% under 1 kW m−2 of solar radiation. In addition, GCLN can maintain its structural stability and evaporation performance during a series of harsh condition and durability tests. Due to the excellent processability of MF, the 3D‐shaped GCLN can be easily designed for an enhanced evaporation rate of 1.59 kg m−2 h−1, which is better than the theoretical limit of the evaporation rate. The novel design presented in this work offers a new avenue to develop solar steam generation devices for low‐cost and large‐scale seawater desalination under natural sunlight conditions, which is especially attractive for the urgent fresh water supply in remote areas. [ABSTRACT FROM AUTHOR]

To improve the photocatalytic activity of TiO2 film, Ti substrates are irradiated by He ions with different incident ion energy, temperature, and fluence. Anatase TiO2 films are then coated on the plasma-irradiated substrates via chemical vapor deposition followed by calcination. Photocurrent tests and photocatalytic oxidation (PCO) of formaldehyde are used to assess photocatalytic performance. The optimal plasma-irradiated samples showed a four times higher photocurrent and a three fold increase in the rate constant of the PCO reaction compared to the TiO2 coated, untreated control sample. It is found that the enhanced photocatalytic activity and photocurrent are related to the changes of Ti crystal structure and surface morphology through plasma irradiation. [ABSTRACT FROM AUTHOR]

A new class of peripherally multiple aromatic ester-functionalized poly(benzyl ether) dendrons and/or dendrimers with different focal point substituents, surface groups, interior structures, as well as different generations have been synthesized and their structure-property relationships with respect to their gelation ability have been investigated systematically. Most of these dendrons are able to gel organic solvents over a wide polarity range. Evident dendritic effects were observed not only in gelation capability but also in thermotropic, morphological, and rheological characterizations. It was disclosed that subtle changes in peripheral ester functionalities and interior dendritic structures affected the gelation behavior of the dendrons significantly. Among all the dendrons studied, the second- and third-generation dendrons G0G2-Me and G0G3-Me with dimethyl isophthalates (DMIP) as peripheral groups exhibited the best capability in gelation, and stable gels were formed in more than 22 aromatic and polar organic solvents. The lowest critical gelation concentration (CGC) reached 2.0 mg mL−1, indicating that approximately 1.35×104 solvent molecules could be entrapped by one dendritic molecule. Further study on driving forces in gel formation was carried out by using a combination of single-crystal/powder X-ray diffraction (XRD) analysis and concentration-dependent (CD)/temperature-dependent (TD) 1H NMR spectroscopy. The results obtained from these experiments revealed that the multiple π-π stacking of extended π-systems due to the peripheral DMIP rings, cooperatively assisted by non-conventional hydrogen-bonding, is the key contributor in the formation of the highly ordered supramolecular and fibrillar network. In addition, these dendritic organogels exhibited unexpected thixotropic-responsive properties, which make them promising candidates with potential applications in the field of intelligent soft materials. [ABSTRACT FROM AUTHOR]

A new class of poly(aryl ether) dendritic ligands containing a pyridine functionality at the focal point and the corresponding AgI complexes through metal-ligand coordination were designed, synthesized, and fully characterized. Compared with the dendritic ligands, the corresponding dendritic complexes exhibited much better gelation ability for various organic solvents at very low critical gelation concentrations. The gel-sol phase transition temperatures and morphologies could be finely tuned by binding silver ion to the ligand. A preliminary study revealed that multiple noncovalent interactions, such as AgI-pyridine coordination, solvophobic interaction, and π-π stacking, synergistically enable the formation of stable metallogels. Interestingly, these metallogels could intelligently respond to multiple external stimuli including temperature, chemicals, and shear stress, leading to gel-sol phase transitions. In addition, these dendritic metallogels were successfully applied as templates for the in situ formation and stabilization of silver nanoparticles without the use of any chemical reducing/stabilizing agents. [ABSTRACT FROM AUTHOR]

A new class of poly(benzyl ether) dendrimers, decorated in their cores with N-Boc-protected 1,2-diphenylethylenediamine groups, were synthesized and fully characterized. It was found that the gelation capability of these dendrimers was highly dependent on dendrimer generation, and the second-generation dendrimer ( R, R)-G2DPENBoc proved to be a highly efficient organogelator. A number of experiments (SEM, TEM, FTIR spectroscopy, 1H NMR spectroscopy, rheological measurements, UV/Vis absorption spectroscopy, CD, and XRD) revealed that these dendritic molecules self-assembled into elastically interpenetrating one-dimensional nanostructures in organogels. The hydrogen bonding, π-π, and solvophobic interactions were found to be the main driving forces for formation of the gels. Most interestingly, these dendritic organogels exhibited smart multiple-stimulus-responsive behavior upon exposure to environmental stimuli such as temperature, anions, and mechanical stress. [ABSTRACT FROM AUTHOR]