Search

The temperature is a very important parameter for an operating vanadium redox flow battery (VRFB). During charging and discharging, the temperature of VRFB is constantly changing. In this paper, a self‐made 35 kW vanadium stack was charged & discharged at the current density of 100 and 120 mA cm−2 to investigate the change trend of real‐time operating temperature. The results show that the temperature decreases during charging and increases during discharging. And the average temperature of each cycle increases with continuous charge‐discharge cycles. The influences of real‐time temperature on performance of columbic efficiency (CE), voltage efficient (VE), over‐potential, capacity, energy, state of charge (SOC), and pressure loss were further investigated. The results show that the temperature fluctuation largely affects the electrochemical properties of VRFB. With the real‐time average temperature increased from 16.02 °C to 29.91 °C, the VE, capacity, energy and the SOC range of the battery increased, while the CE, the over‐potential and the average pressure loss decreased. This work not only gives data support to temperature management of VFB, but also provides direction to the engineering application of all flow batteries. [ABSTRACT FROM AUTHOR]

Hypertensive disorders during pregnancy (HDP) are associated with cardiovascular disease among mothers and offspring. This meta‐analysis was conducted to further explore the associations between maternal HDP and offspring blood pressure (BP). The authors performed a search strategy in PubMed, Embase, Web of Science, and Cochrane library from database inception to January 2022. Twenty‐four studies regarding HDP were included, with pregnancy‐associated hypertension (PAH), preeclampsia (PE), gestational hypertension (GH), and chronic hypertension included in 12, 16, 6, and 3 studies, respectively. Offspring who were exposed to HDP and PAH in utero had higher systolic BP (2.46 mm Hg, 95% CI: 1.88–3.03 mm Hg; 2.70 mm Hg 95% CI: 1.89–3.51 mm Hg) and diastolic BP (1.38 mm Hg 95% CI: 0.94–1.83 mm Hg; 1.39 mm Hg 95% CI: 0.71–2.06 mm Hg) than those birthed to normotensive mothers. The offspring exposure to PE, GH, and chronic hypertension had higher systolic BP by 1.90 mm Hg (95% CI: 1.39–2.40 mm Hg), 2.47 mm Hg (95% CI: 1.59–3.35 mm Hg), and 7.85 mm Hg (95% CI: 4.10–11.61 mm Hg), respectively, and higher diastolic BP by 0.99 mm Hg (95% CI: 0.50–1.49 mm Hg), 1.04 mm Hg (95% CI: 0.60–1.47 mm Hg), and 2.92 mm Hg (95% CI: 0.98–4.86 mm Hg), respectively. An Egger test and funnel plot confirmed no significant publication bias. In conclusion, offspring exposure to all subtypes of HDP in utero led to higher BP than no exposure. It is necessary to investigate the potential mechanisms to clarify the roles of genetic and environmental factors in these associations, which could provide insight on preventing hypertension and related cardiovascular disease. [ABSTRACT FROM AUTHOR]

BACKGROUND: Soil quality assessment is a critical strategy for determining optimum fertilization in intensive pomelo production. In this study, we evaluated the soil quality status and mapped the spatial distribution of 347 soil samples collected from pomelo orchards in Pinghe County, southern China. We analyzed nine chemical parameters and an altitude indicator. RESULTS: The mean soil quality index (SQI) was 0.355 in the total data set (TDS) and 0.292 in the minimum data set (MDS). Available Ca (Avail‐Ca), pH value, organic matter and altitude were selected as indicators of soil quality in the MDS. The SQI in mature orchards (>10 years) was higher than that in young orchards (<10 years), while no differences between soil types and altitude gradients were identified. We detected a significant positive correlation between the SQI based on TDS (SQITDS) and the SQI based on MDS (SQIMDS), and the spatial distribution of soil properties and SQITDS showed a uniform pattern, except for Avail‐N, Avail‐B and SQIMDS. Overall, unfavorable soil quality indicators, including rich in Avail‐P, deficient in Avail‐Ca, ‐Mg and ‐B, soil acidification and high altitude, were considered to be limiting factors for pomelo production. CONCLUSION: The soil chemical quality in pomelo orchards is generally low, indicating that integrated management by controlling acidification, reducing planting altitude, regulating fertilization and monitoring soil properties is required for sustainable pomelo production. © 2021 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Introduction: Toxoplasmosis is a life‐threatening complication after hematopoietic stem cell transplantation (HSCT). However, for several reasons, clinicians know little about Toxoplasma infection. Case presentation: We report a case of toxoplasmosis that was diagnosed by bone marrow smear and metagenomic next‐generation sequencing (mNGS) after HSCT in a boy. Additionally, we summarize the characteristics of toxoplasmosis after pediatric HSCT reported in the literature published in PubMed. Conclusion: Clinicians should increase their awareness of toxoplasmosis in children after HSCT and implement pre‐transplant screening and post‐transplant monitoring and prevention in future according to the national conditions of our country. [ABSTRACT FROM AUTHOR]

Anthracnose is a destructive disease that affects a wide range of crop plants especially in tropical and subtropical regions. Colletotrichum spp. are the major pathogens causing anthracnose. In this study, we collected and identified the pathogen from diseased samples of Stylosanthes, a major tropical forage crop. The ability of the pathogen to naturally infect Arabidopsis thaliana was examined. Sequence analysis of ITS, ACT, CHS, and GAPDH genes showed the pathogen to be Colletotrichum gloeosporioides sensu lato (s.l.), and this was supported further by morphological characterization of representative isolates. The disease symptoms and cellular infection process of aggressive isolates (DZ‐19 and HK‐04) and a weak isolate (CJ‐04) were compared. DZ‐19 and HK‐04 caused more severe disease symptoms on both young seedlings and adult plants of Col‐0 and Ws‐2 ecotypes compared to CJ‐04. Furthermore, the more aggressive isolates showed faster and earlier germination of conidia, formation of appressoria, and growth and development of hyphae during the infection. Genetic analysis of the defence response and expression profiling of defence marker genes demonstrated the involvement of MAP kinase, Ca2+‐dependent protein kinase, salicylic acid, ethylene, and jasmonic acid pathways in the resistance against anthracnose. These results suggest that the Arabidopsis–Colletotrichum gloeosporioides pathosystem should provide a valuable tool for exploring the resistance mechanisms against this pathogen. [ABSTRACT FROM AUTHOR]

Background and objective: ACO is a syndrome with high prevalence. However, a pragmatic diagnostic criterion to differentiate ACO is non‐existent. We aimed to establish an effective model for screening ACO. Methods: A multicentre survey was developed to assess the clinical criteria considered important and applicable by pulmonologists for screening ACO. These experts were asked to take the surveys twice. The expert grading method, analytic hierarchy process and ROC curve were used to establish the model, which was then validated by a cross‐sectional study of 1066 patients. The GINA/GOLD document was the gold standard in assessing this model. Results: Increased variability of symptoms, paroxysmal wheezing, dyspnoea, historical diagnosis of COPD or asthma, allergic constitution, exposure to risk factors, the FEV1/FVC < 70% and a positive BDT were important for screening ACO. According to the weight of each criterion, we confirmed that patients meeting six or more of these eight criteria should be considered to have ACO. We called this Chinese screening model for ACO 'CSMA'. It differentiated patients with ACO with a sensitivity of 83.33%, while the sensitivity of clinician‐driven diagnosis had a sensitivity of only 42.73%. Conclusion: CSMA is a workable model for screening ACO and provides a simple tool for clinicians to efficiently diagnose ACO. We established a screening model for ACO. It is as effective as the GINA/GOLD document to distinguish between ACO, asthma and COPD patients but much simpler to perform. See related Editorial [ABSTRACT FROM AUTHOR]

ABSTRACT A new epoxy-ended hyperbranched polyether (HBPEE) with aromatic skeletons was synthesized through one-step proton transfer polymerization. The structure of HBPEE was confirmed by Fourier transform infrared spectroscopy (FTIR), and nuclear magnetic resonance (NMR) measurements. It was proved to be one high efficient modifier in toughening and reinforcing epoxy matrix. In particular, unlike most other hyperbranched modifiers, the glass transition temperature ( Tg) was also increased. Compared with the neat DGEBA, the hybrid curing systems showed excellent balanced mechanical properties at 5 wt % HBPEE loading. The great improvements were attributed to the increased cross-linking density, rigid skeletons, and the molecule-scale cavities brought by the reactive HBPEE, which were confirmed by dynamical mechanical analysis (DMA) and thermal mechanical analysis (TMA). Furthermore, because of the reactivity of HBPEE, the hybrids inclined to form a homogenous system after the curing. DMA and scanning electron microscopy (SEM) results revealed that no phase separation occurred in the DGEBA/HBPEE hybrids after the introduction of reactive HBPEE. SEM also confirmed that the addition of HBPEE could enhance the toughness of epoxy materials as evident from fibril formation. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1064-1073, 2013 [ABSTRACT FROM AUTHOR]

Diglycidyl ether of bisphenol A (DGEBA)/fluoro-terminated hyperbranched poly(phenylene oxide) (FHPPO) composites with improved mechanical and dielectric performances were prepared by blending a FHPPO with DGEBA. The low-polarity building blocks, abundant fluorinated terminal groups, and the inherent free volume brought by FHPPO efficiently lowered the dielectric constant and the dissipation factor. The free volumes of the cured DGEBA/FHPPO composites, which were quantified by positron annihilation lifetime spectroscopy, increased with the FHPPO loading. The moisture absorption of composites also decreased after the introduction of FHPPO due to the hydrophobicity of fluorinated substituents. Dynamic mechanical analysis tests and scanning electron morphology revealed that FHPPO phase separated from the composites during the curing process. The average diameter of dispersed FHPPO particles increased proportionally with the FHPPO loading. Composites with dispersed particle size of around 150 nm showed the best comprehensive mechanical performance. In addition, incorporation of FHPPO, which has lots of aromatic structures, into DGEBA also increased the thermal stabilities. POLYM. COMPOS., 34:1051-1060, 2013. © 2013 Society of Plastics Engineers [ABSTRACT FROM AUTHOR]

A series of carboxylate gemini surfactants, which contain two hydrocarbon chains linked by amide groups, two carboxylate groups, a flexible alkane spacer were synthesized by three-step reactions and named alkylidene-bis-( N, N′-dodecyl-carboxypropylamides) (2CHCnAm; n = 2, 3, 4, 6, 8 is the number of methylene groups of the spacer), their structures were confirmed by FTIR,H NMR, and LC-MS/TOF, and their purity checked by HPLC. The micellar properties with increasing spacer chain length of these gemini surfactants were determined by surface tension methods. The critical micelle concentration (CMC) varies slightly with spacer chain length; surface tension at CMC(γ), the tendency of micellization versus adsorption, CMC/C, the minimum area per surfactant molecule at the air/solution interface (A), all decrease with increasing spacer chain length; surface reduction efficiency, pC, the surface excess at the air/solution interface (Г) increase with increasing spacer chain length. The results probably indicate that increasing spacer chain length of these carboxylate gemini surfactants will increase spacer incorporation into the double hydrophobic chain. [ABSTRACT FROM AUTHOR]

The aquatic environment often contains different groups of contaminants, but their combined toxicity on microalgae has seldom been reported. The present study compared the toxic effects of combined mixed polycyclic aromatic hydrocarbons (PAHs) and heavy metals on growth and antioxidant responses of free and immobilized microalga, Selenastrum capricornutum. Five PAHs-phenanthrene, fluorene, fluoranthene, pyrene, and benzo[ a]pyrene-and four heavy metals at different concentrations-0.05 to 0.1 µg Cd2+ ml−1, 0.05 to 1 µg Cu2+ ml−1, 0.05 to 1 µg Zn2+ ml−1, and 0.5 to 2.5 µg Ni2+ ml−1-were examined. Results showed that the chlorophyll a content of free and immobilized S. capricornutum was not affected by PAHs but was significantly inhibited by heavy metals. Conversely, the antioxidant parameters, including the content of reduced glutathione (GSH) and the activities of superoxide dismutase and peroxidase, were significantly induced by both PAHs and metals. For the combined toxic effects of PAHs and heavy metals, cell growth and antioxidant responses varied with exposure time and contaminants and differed between free and immobilized cells. The effects of cocontaminants on the GSH content in free cells were mainly synergistic but changed to antagonistic in immobilized cells. The toxic effects of cocontamination on free cells were also more obvious than those on immobilized cells. These findings suggest that immobilization offers some protection to microalgal cells against toxic contaminants causing differences in the interaction and responses to combined toxicants between free and immobilized cells. Immobilized cells might be more suitable for treating wastewater containing toxic contaminants than free cells. Environ. Toxicol. Chem. 2013;32:673-683. © 2012 SETAC [ABSTRACT FROM AUTHOR]