Search

This paper presents the design of an adaptive controller that solves the synchronization control problem of two identical Nwachioma chaotic systems in a master-slave configuration. The closed-loop stability is guaranteed by means of a Lyapunov-like analysis. With the aim of verifying the feasibility and performance of the proposed approach, a comparison with an active control algorithm is developed at the numerical simulation level. Based on such results, the master-slave Nwachioma chaotic system in closed-loop with adaptive control is now being experimentally tested by using two personal computers and two low-cost Arduino UNO boards. The experimental results not only show the good performance of the adaptive control but also that Arduino UNO boards are an excellent option for the experimental setup. [ABSTRACT FROM AUTHOR]

The main contribution of this study is to show the effect of light-emitting diode (LED) modelling in the design of offline drives. The authors propose the use of a source voltage and resistance model (SVRM), consisting of a threshold voltage source in series with the characteristic resistance, for the modelling of the LED. The offline drive used for the analysis is the flyback converter operating in discontinuous conduction mode. The equivalent circuit is analysed by superposition and the AC circuit is analysed with phasors. The analysis has proven that the flyback converter can be modelled as a current source feeding the output capacitor in parallel with the load. Likewise, the analysis demonstrated that the current ripple is always greater than the voltage ripple when an LED is used as a load. In order to validate the theoretical analysis, a design methodology for the flyback converter with the SVRM as a load was developed. The designed circuit was simulated in Spice and implemented in a prototype. Experimental results using an LED as load are compared with the same circuit using a simple resistance as load. The experimental results confirm the theoretical analysis with an error of <6.6%. [ABSTRACT FROM AUTHOR]

In this paper, a new linear feedback controller for synchronization of two identical chaotic systems in a master-slave configuration is presented. This controller requires knowing a priori Lipschitz constant of the nonlinear function of the chaotic system on its attractor. The controller development is based on an algebraic Riccati equation. If the gain matrix and the matrices of Riccati equation are selected in such a way that a unique positive definite solution is obtained for this equation, then, with respect to previous works, a stronger result can be guaranteed here: the exponential convergence to zero of the synchronization error. Additionally, the nonideal case is also studied, that is, when unmodeled dynamics and/or disturbances are present in both master system and slave system. On this new condition, the synchronization error does not converge to zero anymore. However, it is still possible to guarantee the exponential convergence to a bounded zone. Numerical simulation confirms the satisfactory performance of the suggested approach. [ABSTRACT FROM AUTHOR]

Summary: In this paper, the analysis, design, and implementation of a power supply based on a multi‐stage‐shunt class E amplifier applied to ozone generation are presented. The proposed topology operates with pulsating waveforms and allows unidirectional energy flow from the power supply to the load with no energy return. Furthermore, due to the multi‐stage operation, it presents a lower stress in the switches compared with other similar topologies. To validate the proposed topology, a prototype was designed to feed a set of ozone generating cells in a power range of 0 to 500 W. This prototype provides an efficiency of 95% with an ozone production of 10.5 g/h and efficacy of 22.89 g/kWh. The proposed power supply is an alternative to feed any other type of dielectric barrier discharge load while keeping the efficiency of the power supply above 90%. The analysis, design, and implementation of a power supply based on a multi‐stage‐shunt class E amplifier applied to ozone generation are presented; due to the multi‐stage operation, it presents a lower stress in the switches compared with other similar topologies and higher efficiency. To validate the proposed topology, a prototype was designed to feed a set of ozone generating cells in a power range of 0 to 500 W. [ABSTRACT FROM AUTHOR]