Search

SUMMARY Recently, the use of permanent magnet (PM) motors has risen markedly because of improvements in the performance of rare earth PM motors. However, the use of rare earth materials, which is an important aspect of the high-performance PM motor, should be reduced because of the high cost and unpredictability associated with procuring such materials. The performance of motors that use rare earth materials has reached a very high level, one that will not be easy to match without such materials. In this paper, we propose a structure for a high-power-density PM-assisted synchronous reluctance motor involving the use of a ferrite PM. The structure prevents irreversible demagnetization of the PM even in the presence of heavy flux-weakening excitation or an inverter fault. It is shown that the proposed structure achieves high-power and high-efficiency performance. © 2014 Wiley Periodicals, Inc. Electr Eng Jpn, 187(1): 42-50, 2014; Published online in Wiley Online Library (). DOI 10.1002/eej.22362 [ABSTRACT FROM AUTHOR]

In this study, we investigate the torque response of a control system that is based on the direct torque control (DTC) principle for an interior permanent magnet synchronous motor (IPMSM). We also propose a gain-scheduling method for improving the torque response. Reference flux vector calculation (RFVC) DTC is used in this study. In RFVC DTC, a PI controller is used for torque control; this is in contrast to the use of the hysteresis comparator and switching table in basic DTC. In this paper, we present the relationship between the torque response and the gain of the PI controller. This relationship is derived by using the transfer function of the torque control loop. We also examine the difference between the torque responses of two motors that have different machine parameters. The proposed method can be used to realize a torque response that is independent of the operating torque. The simulation results and experimental results presented in this paper show the validity of the derived relationship as well as the effectiveness of the proposed method. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 181(2): 55-65, 2012; Published online in Wiley Online Library (). DOI 10.1002/eej.21198 [ABSTRACT FROM AUTHOR]

The model parameters of a permanent magnet synchronous motor (PMSM) are required for high-performance control and a model-based sensorless control. This paper proposes a sensorless control system of PMSM that does not need parametric information beforehand. The parameters of a PMSM drive system, including the inverter, are identified at standstill and under operating conditions. At first, the initial rotor position is estimated by a signal injection sensorless scheme in which the machine parameters are not required. After the initial position has been estimated, the resistance, including the on resistance of the IGBT, the voltage error caused by dead time in the inverter, and d-axis and q-axis inductances, are identified at standstill. After the motor starts by the signal injection sensorless control, the sensorless scheme changes to an extended EMF estimation scheme. The estimated parameters for the resistance, and daxis and q-axis inductances are used in such sensorless control. The magnet flux-linkage, which cannot be estimated at standstill, is identified under the sensorless operation at medium and high speeds. The effectiveness of the proposed method is verified by several experimental results. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 160(2): 68–76, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/ eej.20548 [ABSTRACT FROM AUTHOR]

A synchronous reluctance motor has many advantages because it has no permanent magnet, such as low back emf in high-speed operation, maintaining performance in a high-temperature environment, and so on. Therefore, many rotor constructions have been studied and developed. The rotor with multiflux barrier structure has the merit of easy construction and high performance. The linear synchronous reluctance motor has been developed. It is necessary to improve the performance of the mover design for industrial use, because of its low power factor. In this paper, we propose a novel configuration of mover for the linear synchronous reluctance motor, and examine the static characteristics of the motor with reluctance equalization design by means of the finite element method. From analytical results, it is demonstrated that the static characteristics of the linear synchronous reluctance motor are greatly improved by the reluctance equalization design at the iron layer in the mover. © 2002 Scripta Technica, Electr Eng Jpn, 138(4): 61–69, 2002; DOI 10.1002/eej.1139 [ABSTRACT FROM AUTHOR]

Permanent magnet synchronous motors (PMSMs) are widely used in many applications as high-performance variable-speed drives. In traction drives, such as those used for electric vehicles or for the compressor drives of air conditioners, a wide constant-power speed range and high-efficiency operation are desired. The aim of this paper is to develop a high-performance PMSM that offers high-efficiency performance in the high-speed region, including light-load conditions, as well as a wide constant-power speed range. Simulations show that the proposed interior PMSM, which produces chiefly reluctance torque and in which the permanent magnet flux assists torque production, is capable of meeting the above performance requirements. A prototype PMSM is designed in accordance with this new design concept and several drive tests are carried out. The saliency ratio of the prototype IPMSM is about 5, and, as a result, reluctance torque is the principal torque component, representing more than 70% of total torque. The prototype IPMSM can attain a constant-power speed range of up to 5:1 with high-efficiency drive in the high-speed, constant-power region. The proposed IPMSM is suitable for variable-speed drives requiring high-speed, constant-power operation. © 2000 Scripta Technica, Electr Eng Jpn, 134(3): 60–68, 2001 [ABSTRACT FROM AUTHOR]

The article presents information on the use of compensating magnets to reduce thrust imbalance in cylindrical linear pulse motors. A linear pulse motor (LPM) has many advantages for a high accuracy positioning actuator because. It has linear motion without any mechanical link. The flat type LPM generally is used in many industrial applications. However, it has a disadvantage in that the mover support mechanism becomes complex and heavy because the attraction force between the stator and the mover is very large. As the attraction force is balanced in the cylindrical structure, the cylindrical LPM is allowed to have a simple and lightweight support mechanism.