Search

MXenes are emerging rapidly as promising electrode materials for energy storage due to their high electronic conductivity and rich surface chemistry, but their potassium storage performance is unsatisfactory because of the large size of K+ and irreversible interfacial reaction. Here, a developed 3D foam‐like MXene scaffold (3D‐FMS) is constructed via an electrostatic neutralization of Ti3C2Tx with positive‐charged melamine followed with calcination, which offers massive surface‐active sites and facilitates fast K+ transfer for boosting the potassium‐ion storage capacity and dynamics. In addition, using KFSI‐based electrolyte, the formation of a robust solid electrolyte interface layer with more inorganic components on MXene anode is revealed for enhancing the Coulombic efficiency. Consequently, the 3D‐FMS with KFSI‐based electrolyte delivers enhanced potassium‐ion storage performance in terms of capacity (161.4 mAh g−1 at 30 mA g−1), rate capability (70 mAh g−1 at 2 A g−1), and cycling stability (80.5 mAh g−1 at 1 A g−1 after 2000 cycles). Moreover, the assembled 3D‐FMS//activated carbon potassium‐ion hybrid supercapacitor delivers a high energy density of 57 Wh kg−1 at a power density of 290 W kg−1. These excellent performances demonstrate the great superiority of 3D‐FMS in KFSI‐based electrolyte and may accelerate the development of MXene‐based materials for potassium storage systems. [ABSTRACT FROM AUTHOR]

Potassium‐ion batteries (KIBs) have recently attracted considerable attention owing to their resource abundance, low cost and environmental friendliness. Graphite as a mature commercial anode material for lithium‐ion batteries, has been proved as a promising anode candidate for KIBs by reversible forming potassium‐graphite intercalation compounds. However, large volume expansion and sluggish K+ kinetics caused by the incompatibility between large radius of K+ and the small interlayer spacing of graphite, result in the poor cycle stability and rate performances, hindering its practical application. Extensive research efforts have focused on improving the potassium storage performance of graphite anodes. This review provides an overview of recent advances in addressing these challenges and optimizing the electrochemical performance of graphite anodes for KIBs. Various strategies to improve the electrochemical performance of graphite and graphitic carbon anodes, such as microcrystalline regulation, heteroatom doping, morphological adjustment, and coating modification, are discussed, while the critical issues and challenges associated with graphite anodes and the prospects for their advancement in KIBs are highlighted. The review offers valuable guidelines for rational structural design and promotes the commercial development of high‐performance graphite anode materials for KIBs. [ABSTRACT FROM AUTHOR]

2D MXenes have emerged as promising supercapacitor electrode materials due to their metallic conductivity, pseudo‐capacitive mechanism, and high density. However, layer‐restacking is a bottleneck that restrains their ionic kinetics and active site exposure. Herein, a carbon dots‐intercalated strategy is proposed to fabricate flexible MXene film electrodes with both large ion‐accessible active surfaces and high density through gelation of calcium alginate (CA) within the MXene nanosheets followed by carbonization. The formation of CA hydrogel within the MXene nanosheets accompanied by evaporative drying endow the MXene/CA film with high density. In the carbonization process, the CA‐derived carbon dots can intercalate into the MXene nanosheets, increasing the interlayer spacing and promoting the electrolytic diffusion inside the MXene film. Consequently, the carbon dots‐intercalated MXene films exhibit high volumetric capacitance (1244.6 F cm−3 at 1 A g−1), superior rate capability (662.5 F cm−3 at 1000 A g−1), and excellent cycling stability (93.5% capacitance retention after 30 000 cycles) in 3 m H2SO4. Additionally, an all‐solid‐state symmetric supercapacitor based on the carbon dots‐intercalated MXene film achieves a high volumetric energy density of 27.2 Wh L−1. This study provides a simple yet efficient strategy to construct high‐volumetric performance MXene film electrodes for advanced supercapacitors. [ABSTRACT FROM AUTHOR]

Sodium‐ion batteries (SIBs) are regarded as a kind of promising candidate for large‐scale energy storage technology. The development of advanced carbon anodes with high Na‐storage capacity and initial Coulombic efficiency (ICE) from low cost, resources abundant precursors is critical for SIBs. Here, a carbon microcrystalline hybridization route to synthesize hard carbons with extensive pseudo‐graphitic regions from lignite coal with the assistance of sucrose is proposed. Employing the cross‐linked interaction between sucrose and lignite coal to generate carbon‐based hybrid microcrystalline states, the obtained hard carbons possess pseudo‐graphitic dominant phases with large interlayer spaces that facilitate Na ion's storage and transportation, as well as fewer surface defects that guarantee high ICE. The LCS‐73 with an optimum cross‐link demonstrates the highest Na‐storage capacity of 356 mAh g−1 and an ICE of 82.9%. The corresponding full‐cell delivers a high energy density of 240 Wh kg−1 (based on the mass of anode and cathode materials) and excellent rate capability of 106 mAh g−1 at 10 C in addition to outstanding cycle performance with 80% retention over 500 cycles at 2 C. The proposed work offers an efficient route to develop high‐performance, low‐cost carbon‐based anode materials with potential application for advanced SIBs. [ABSTRACT FROM AUTHOR]

This work describes the fabrication of unique arrow head shaped CuO nanostructures using simple hydrothermal treatment method. The highly attractive features were obtained by the application of glutaric acid utilised simultaneous as template and functionalising agent. The functionalised nanostructures were known to possess excellent potential towards the electro-catalytic oxidation of carbofuran pesticide. The generated intense electrochemical signal with lower potential value enabled sensitive and selective determination of carbofuran up to 1×10−3 µM with wide sensing window in range of 0.01 to 0.16 µM. The feasibility of the developed sensor system for the practical application was also studied by testing its potential in real sample extracts of various vegetables. The excellent recoveries demonstrated the analytical robustness of the developed sensor system. The sensor system utilises a new and simple approach towards sensitive determination of toxic pesticides reflecting its wide spectrum application in various fields. [ABSTRACT FROM AUTHOR]