Search

Porous photonic structures have greatly advanced large‐scale radiative cooling application owing to its satisfying optical properties, easy‐designation, and low cost. However, current reported porous radiative cooling materials mainly focuses on uniform or random pore distribution structure, which failed to achieve precise spectrum control for sunlight and mid‐infrared light, thereby weakening the radiative cooling performance. Herein, gradient structural porous metamaterials (GSPMs) are proposed and successfully constructed for maximizing cooling effectiveness based on step‐by‐step freeze‐casting technology. The designed GSPMs with gradient micro‐nano porous structure can wide‐range scatter entire solar spectrum while possess gradual refractive index transition to increase air‐medium interface absorption at mid‐infrared regions. Notably, solar reflectivity and mid‐infrared emissivity of GSPMs reach 97.3% and 97.6%, achieving maxinum cooling temperature of 8.7 °C and net cooling power of 94.1 W m−2, presenting a higher cooling effect than random porous materials. Moreover, GSPMs enable achieve compatibility with color aesthetic and cooling superiorities due to selective spectra response behavior, as well as can be applied in building materials, realizing efficient energy saving and CO2 emission reduction. This work proposed gradient porous structure can achieve highly efficient daytime radiative cooling, offering new possibilities in the structure design of next‐generation porous radiative cooling materials. [ABSTRACT FROM AUTHOR]

This document discusses the increasing demand for high-efficient isolated DC/DC converters in renewable energy applications. It presents seventeen papers that cover various topics such as reducing switch count and current balancing, addressing voltage ringing issues, solving current unbalance problems, and optimizing converter design. The papers provide experimental results and propose innovative methods to improve the efficiency and performance of DC/DC converters in renewable energy applications. The document also includes three research papers related to power converters, including one on a prototype for NanoGrid applications, one on a new DC-DC bipolar resonance converter, and one on enhancing the stability of a DCMG cluster. The text also includes acknowledgments and biographies of the guest editors. [Extracted from the article]

LLC resonant converters are widely adopted in many different industrial applications due to their high efficiency operation. To further improve LLC resonant converters' efficiency, the secondary unregulated diode rectifier is replaced by the synchronous rectifier (SR). In many applications, LLC converter is designed to operate at resonant frequency to maximize the system efficiency and act as a DC transformer (DCX). The SR driving signal is set as the same as the primary driving signal to work in an open‐loop mode. However, the resonant frequency will deviate due to the tolerance, working environment, and ageing effect of circuit components, which will lead to the degradation of the system efficiency and output voltage variation. Unfortunately, most of the existing techniques cannot be simply adopted in SR LLC DCX. Therefore, an adaptive SR driving strategy that can compensate the circuit components' variations is necessary for SR LLC DCX. Inan adaptive SR strategy based on the constant voltage gain characteristic at resonant frequency point is proposed. The proposed strategy is applicable for all different scenarios with easy implementation and low cost. [ABSTRACT FROM AUTHOR]

Defoliation, often induced by herbivores, and soil microbiomes are recognized as key drivers of plant diversity and productivity in grasslands. However, lack of experiments simultaneously manipulating defoliation and soil microbial diversity has constrained our understanding of how these two factors interactively influence both above‐ground and below‐ground net primary productivity (ANPP and BNPP).We employed a soil filtering approach to create the gradient of soil microbial diversity and removal of above‐ground biomass by clipping to simulate defoliation effect from herbivores. Our goal was to investigate how soil microbial diversity affected both ANPP and BNPP under the stress of defoliation.We found that defoliation and soil microbial diversity loss decreased the ANPP and BNPP of the plant community, and Medicago falcata (legume) was more responsive to these treatments than Leymus chinensis (grass) and Artemisia frigida (forb). ANPP was positively correlated with soil microbial richness only when plants suffered defoliation. By contrast, BNPP showed a closer relationship with soil fungal richness than bacteria, and defoliation enhanced this relationship. The structural equation model (SEM) showed that defoliation indirectly regulated ANPP by affecting plant P content, while soil bacterial diversity loss decreased the ANPP through altering plant P and fungal diversity loss directly decreased BNPP. The LEfSe and linear regression analysis revealed that the biomarkers of bacteria (e.g. Actinobacteria, Xanthobacteraceae) and fungi (e.g. Ascomycota, Glomerales) significantly contributed to the variation of ANPP and BNPP under defoliation treatment respectively. Defoliation enhanced phosphorus acquisition by soil microorganisms, further strengthening the microbial regulation of plant productivity.Overall, we provide novel insights on how defoliation enhances the positive effects of soil microbial diversity on above‐ and below‐ground net primary productivity. Our findings highlight that soil microorganisms associated with phosphorus cycling are mobilized to play a more active role in promoting productivity after defoliation. It may provide a new perspective on how to better utilize the role of soil microorganisms in grazed or managed grasslands. Read the free Plain Language Summary for this article on the Journal blog. [ABSTRACT FROM AUTHOR]

A conventional pulse frequency modulation (PFM) controlled LLC resonant converter requires a wide switching frequency operating range to regulate the output voltage. There are some disadvantages of PFM LLC resonant converters: (i) the design and optimisation of magnetic components and gate driver circuitry are challenging; (ii) due to the variable switching frequency operating range, electro‐magnetic interference performance of the converter is degraded; (iii) efficiency degradation; (iv) inability to achieve independent control in multiple‐output applications. To address the above‐mentioned problems and achieve fixed switching frequency operation, a variable magnetising inductance control (VMIC) strategy is proposed. In the proposed VMIC control strategy, the operating switching frequency of the primary switch is fixed and the duty cycle remains constant at 0.5. At the resonant frequency operating point, the output voltage is independent of both the magnetising inductance and load. In addition, the zero current turn‐off operation of the secondary rectifier requires that the switching frequency be designed below the resonant frequency. The operational principles and design considerations of the LLC resonant converter with VMIC are presented. Experimental results from a 200 W prototype are presented to validate the theoretical analysis and the effectiveness of the proposed VMIC control strategy. [ABSTRACT FROM AUTHOR]

In wide voltage range applications, traditional LLC converters suffer from the following issues: (i) to cover a wide voltage gain operating range, the required switching frequency range is also large, which challenges the design and optimisation of magnetic components, gate driver circuitry, and electro-magnetic interference filter; (ii) a small magnetising inductance is preferred in wide voltage gain range application, which leads to the increase of circuit circulating current and corresponding conduction loss; (iii) passive elements are determined based on the minimum switching frequency, so bulky passive elements are required to satisfy the required operation range. To solve these problems, in this study, a full-bridge LLC (FBLLC) resonant converter with two operation modes, namely full-bridge operation and frequency doubler operation, is proposed for wide voltage gain range application. The FBLLC converter discussed in this study can be designed in half of the input voltage range when compared with the conventional method, so smaller switching frequency operating range and higher efficiency operation are guaranteed. In addition, the smooth mode transition is achieved by introducing switching frequency feedforward control and small output voltage overshoot or undershoot is observed. A 150 W experimental prototype was built to validate the theoretical analysis. [ABSTRACT FROM AUTHOR]

LLC resonant converter has been widely used in many applications due to its characteristics of high efficiency and high frequency characteristics. Analysis method plays great role in converter design and operation performance. For LLC resonant converter, the most frequently used analysis methods are frequency-domain analysis (FDA) and time-domain analysis (TDA). FDA assumes that only fundamental harmonics can deliver energy in the system, while TDA is obtained by solving circuit state equations. In this study, comprehensive and complete comparisons between FDA and TDA in terms of analysis methodology, parameter design, analysis accuracy, conduction loss, other power losses, and system efficiency are implemented. The analysis and comparison results show that under the same system specifications, by adopting TDA, a larger magnetising inductance value can be used when compared with FDA, which will reduce the resonant tank circulating current and increase the system efficiency. The comprehensive analysis can provide guidance for engineers when analysing and designing LLC resonant converter. Finally, a 200 W experimental prototype was built and tested to verify the theoretical analysis. [ABSTRACT FROM AUTHOR]

Tuberculosis (TB) is one of the most prevalent infections. However, anti‐TB drugs induce adverse liver injury in up to 40% of patients. Studies on candidate genes have suggested that single‐nucleotide polymorphisms account for only a small contribution to the occurrence of anti‐TB drug‐induced liver injury (ATLI). In this study, whole‐genome DNA methylation analysis was performed to systematically screen the ATLI‐associated factors in a 49 vs. 51 case‐control population. Next, 34 identified candidate probes were validated using MassARRAY in 296 cases and 288 controls. Our results indicated that 12 CpG sites on seven probes were positively associated with ATLI risk. Furthermore, we applied a CRISPR/Cas9‐mediated methylation modifiable cell model and demonstrated that four CpGs in or near the gene region of AK2,SLC8A2, and PSTPIP2 affected the cellular response to rifampicin treatment. This study provides new biomarkers associated with ATLI occurrence. [ABSTRACT FROM AUTHOR]

Soil biota could have a significant impact on plant productivity and diversity through benefiting plants and mediating plant-plant interaction. However, it is poorly understood how soil biotic factors interaction with abiotic environments affect plant community diversity and composition. Here, we investigate the community-level consequences of arbuscular mycorrhizal fungi (AMF) interactions with multiple nutrients and their ecological stoichiometry. We conducted a greenhouse experiment manipulating nitrogen (N) and phosphorus (P) to create soil nutrient availability and N:P gradients for microcosm communities with and without AMF. We found that AMF suppressed plant diversity at low P levels, whereas it did not alter the diversity at high P levels because of trade-offs in the abundance of the dominant and subordinate species. AMF reduced plant diversity at the intermediate N:P ratios, while AMF did not affect the diversity at low and high N:P ratios. P addition decreased the mycorrhizal contribution to community productivity, whereas N addition reduced the negative effects of AMF on productivity at high P levels. AMF decreased community productivity at low N:P ratios but increased it at high N:P ratios. AMF increased the stoichiometric homoeostasis of plant communities, which was positively correlated with the stability of productivity under variations in soil N:P ratios. Our study demonstrates that both resource availability and stoichiometry influence the effect of AMF on plant community productivity and diversity and suggests that AMF may increase the stability of plant communities under variations in the soil nutrients by increasing the stoichiometric homoeostasis of the plant community. [ABSTRACT FROM AUTHOR]