Search

The In‐based double perovskite halides have been widely studied for promising optical‐electric applications. The halide hexagonal perovskite Cs2LiInCl6 was isolated using solid‐state reactions and investigated using X‐ray diffraction and solid‐state NMR spectra. The material adopts a 12‐layered hexagonal structure (12R) consisting of layered cationic orders driven by the cationic charge difference and has Li+ cations in the terminal site and In3+ in the central site of face‐shared octahedron trimers. Such a cationic ordering pattern is stabilized by electrostatic repulsions between the next‐nearest neighboring cations in the trimers. The LiCl6 octahedron displays large distortion and is confirmed by 7Li SS NMR in the Cs2LiInCl6. The Cs2LiInCl6 material has a direct bandgap of ~4.98 eV. The Cs2LiInCl6: Mn2+ displays redshift luminescence (centered at ~610–622 nm) from the substituted Mn2+ emission in octahedron with larger PLQY (17.8 %–48 %) compared with that of Cs2NaInCl6: Mn2+. The Mn‐doped materials show luminescent concentration quenching and thermal quenching. The composition Cs2Li0.99In0.99Mn0.02Cl6 exhibits the highest PL intensity, a maximum PLQY of 48 %, and high luminescent retention rate of ~86 % below 400 K and is suitable for application for pc‐LED. These findings contribute to our understanding of the chloride perovskites and hold potential for widespread optical applications. [ABSTRACT FROM AUTHOR]

Cr3+‐activated near‐infrared (NIR) phosphors have gained extensive attention for use in NIR phosphor‐converted light‐emitting diodes (pc‐LEDs), which are required for smart NIR spectroscopy techniques. Nevertheless, obtaining broadband NIR‐emitting phosphors with outstanding thermal stabilities and photoluminescence (PL) efficiencies remains a significant challenge. Herein, considering NaSr2XGe5O14 (X = Al, Ga, Sc, and In) as hosts, which possess a large band gap and multiple sites for the substitution of Cr3+ ions. NaSr2XGe5O14:Cr3+ phosphors are successfully prepared using a solid‐state reaction technology. Upon blue light excitation, the phosphors cover a broad NIR emission band in 650–1100 nm region. Notably, an abnormal blueshift and PL enhancement are observed following the substitution of Al/Ga with Sc/In. In particular, the PL internal quantum efficiency is improved from 34.5% (NaSr2GaGe5O14: Cr3+) to 87.5% (NaSr2ScGe5O14: Cr3+). Moreover, the manufactured NIR pc‐LED exhibited an exceptional photoelectric efficiency of 17.7% with an NIR output power of 10.2 mW at 20 mA, and its potential application in nondestructive detection is demonstrated. [ABSTRACT FROM AUTHOR]

The near‐infrared (NIR) phosphor‐converted light‐emitting diode (pc‐LED) is a new NIR light source with both compact structure and high efficiency, and its performances is greatly depended on the NIR phosphors. Herein, this work presents a Cr3+‐doped gadolinium aluminum gallium garnet (GAGG:Cr3+) NIR ceramic phosphor with a broadband emission in the range of 650–850 nm, and optical performances that can be regulated via crystal‐field engineering. By optimizing the Al/Ga ratio, an external quantum efficiency as high as 65% is observed. The thermal stability is enhanced with the increase of Al content, which is attributed to the broadening of bandgap and the weakening of electron–phonon coupling effect. The NIR light output powers of the fabricated device based on the GAGG:Cr3+ ceramic are up to 88.9 mW @ 10 mA and 1247.7 mW @ 200 mA, while the electro‐optical conversion efficiencies were 28.5% @ 10 mA and 17.7% @ 200 mA, respectively. In addition, the NIR pc‐LED exhibited a strong penetrability such that the veins in a palm could be clearly identified, allowing for its potential use in biosecurity applications. [ABSTRACT FROM AUTHOR]

The doping of transition metal ions in the up‐conversion (UC) luminescent material doped with Yb3+/Ln3+ is a facile way to increase their UC luminescence intensities and alter their colors. In this study, La2MgTiO6:Yb3+/Mn4+/Ln3+ (Ln3+ = Er3+, Ho3+, and Tm3+) phosphors showing excellent luminescence properties were prepared by a solid‐state method. The sensitivity of the La2MgTiO6:Yb3+/Ln3+/Mn4+ phosphor was double that without Mn4+, because Mn4+ affects the UC emissions of Ln3+ via energy transfer between these ions. Moreover, Mn4+ also acts as a down‐conversion activator, which can combine with UC ions to achieve multi‐mode luminescence at different wavelengths. Under 980 nm excitation, these samples emit green light (from Er3+ and Ho3+) and blue light (from Tm3+). In contrast, under 365 nm excitation, they emit red light (from Mn4+). Further testing revealed that the La2MgTiO6:Yb3+/Mn4+/Ln3+ phosphors have potential applications in temperature sensing and anti‐counterfeiting. [ABSTRACT FROM AUTHOR]

Tailoring the local crystal environment around the activators is one of an important way to enhance the upconversion (UC) luminescence intensity. Herein, we substitute the Y3+ lattice with La3+ ion gradually in Y2Ti2O7:Yb3+, Er3+ phosphor and investigate the effect of La3+ concentration on the UC luminescent properties as well as the temperature sensing behaviors. During the phase transformation process from cubic Y2Ti2O7 to monoclinic La2Ti2O7, the La3+ ions also play an important role on the adjustment of size and morphology of particles. Furthermore, the cooperation of La3+ ion is in favor of the crystal growth toward the easy growth directions. The UC luminescence intensities can be enhanced efficiently with the increasing of La3+ concentration. The sensitivity for temperature sensing can be improved by the increasing of La3+ concentration in the Y2Ti2O7 and La2Ti2O7 two‐phase coexistence system and the maximum SA is 45.3 × 10−4 K−1 at 410K when the La3+ concentration is 80%. The maximum SA and corresponding temperature can be adjusted by controlling the La3+ concentration, which means that (Y0.94‐xLax)2Ti2O7: Er3+/Yb3+ phosphors may be applicable to different working environment. [ABSTRACT FROM AUTHOR]

It has been one of the hot issues to prepare the red‐emitting Mn4+‐doped fluoride phosphors with highly efficient and waterproofness for warm white‐light‐emitting diodes (WLEDs) by the green and environmentally friendly method. Herein, we design a novel green molten salt route to synthesize K2SiF6:Mn4+ red powder using molten NH4HF2 salt instead of HF liquor as the reaction medium. The results show that KMnO4 and MnF2 could produce Mn4+ in NH4HF2 molten salt through a reduction reaction, and the resulting Mn4+‐doped K2SiF6 exhibited a bright red emission peaked at 632 nm under blue light excitation. The luminescence intensity of the as‐obtained product after immersing into water for 24 hours maintain nearly 100% of that before soaking and emission peak shape remains unchanged. The thermal stability of the sample was evaluated by temperature‐dependent luminescence spectral intensity during heating and cooling. Furthermore, a warm white‐light‐emitting diodes (WLEDs) with an excellent color rendering index (Ra = 87.1), lower correlated color temperature (CCT = 3536K), and high luminous efficacy (116.99 lm·W−1) was fabricated based on blue chip and K2SiF6:Mn4+ and commercial yellow phosphor (Y3Al5O12:Ce3+). [ABSTRACT FROM AUTHOR]

Current white light emitting diodes (WLEDs) have poor thermal stability and lack red‐light, which restrict their applications in high‐power and high‐color‐rendering‐index solid‐state lighting. YAG glass‐ceramics provide an efficient way to resolve these problems. Herein, novel YAG‐embedded calcium bismuth borate glass‐ceramics (YAG‐GCs) with Eu3+ doping were prepared using a rapid melt quenching technique. The precursor glass exhibits superior YAG refractive index matching and high transmittance. Differential scanning calorimeter simulations verify YAG particles react with the precursor glass. The degree of YAG erosion is slight but monotonously increases with the co‐sintering temperature from 640 to 700°C. The erosion products probably contain YAB (Al3Y(BO3)4), Al3Eu(BO3)4, Bi24B2O39, and Ca12Al14O33 phases, and the Bi ion valence state is maintained during the reaction process. The energy transfer from Ce3+ to Eu3+ is suppressed. The YAG‐GC PL intensities monotonously increase as the co‐sintering temperature decrease from 640 to 700°C and the YAG content increase from 2.5 to 7 wt.%. The optical parameters of a WLEDs packed by YAG‐GCs and blue chips are a luminous efficiency of 105.3 lm/W, correlated color temperature of 3940 K and color rendering index of 70.1. The as‐prepared YAG‐GCs are promising candidates for high‐power, warm WLEDs due to their superior thermal stability, high quantum efficiency, and low cost. [ABSTRACT FROM AUTHOR]

A series of novel SrLu2O4: x Ho3+, y Yb3+ phosphors ( x=0.005-0.05, y=0.1-0.6) were synthesized by a simple solid-state reaction method. The phase purity, morphology, and upconversion luminescence were measured by X-ray diffraction ( XRD), scanning electron microscopy ( SEM), and photoluminescence ( PL) spectroscopy. The doping concentrations and sintering temperature were optimized to be x=0.01, y=0.5 and T=1400°C to obtain the strongest emission intensity. Under 980 nm laser diode excitation, the SrLu2O4:Ho3+, Yb3+ phosphors exhibit intense green upconversion ( UC) emission band centered at 541 nm (5F4,5S2→5I8) and weak red emission peaked at 673 nm (5F5→5I8). Under different pump-power excitation, the UC luminescence can be finely tuned from yellow-green to green light region to some extent. Based on energy level diagram, the energy-transfer mechanisms are investigated in detail according to the analysis of pump-power dependence and luminescence decay curves. The energy-transfer mechanisms for green and red UC emissions can be determined to be two-photon absorption processes. Compared with commercial NaYF4:Er3+, Yb3+ and common Y2O3:Ho3+, Yb3+ phosphors, the SrLu1.49Ho0.01Yb0.5O4 sample shows good color monochromaticity and relatively high UC luminescence intensity. The results imply that SrLu2O4:Ho3+, Yb3+ can be a good candidate for green UC material in display fields. [ABSTRACT FROM AUTHOR]

The doping of transition metal ions in the up‐conversion (UC) luminescent material doped with Yb3+/Ln3+ is a facile way to increase their UC luminescence intensities and alter their colors. In this study, La2MgTiO6:Yb3+/Mn4+/Ln3+ (Ln3+ = Er3+, Ho3+, and Tm3+) phosphors showing excellent luminescence properties were prepared by a solid‐state method. The sensitivity of the La2MgTiO6:Yb3+/Ln3+/Mn4+ phosphor was double that without Mn4+, because Mn4+ affects the UC emissions of Ln3+ via energy transfer between these ions. Moreover, Mn4+ also acts as a down‐conversion activator, which can combine with UC ions to achieve multi‐mode luminescence at different wavelengths. Under 980 nm excitation, these samples emit green light (from Er3+ and Ho3+) and blue light (from Tm3+). In contrast, under 365 nm excitation, they emit red light (from Mn4+). Further testing revealed that the La2MgTiO6:Yb3+/Mn4+/Ln3+ phosphors have potential applications in temperature sensing and anti‐counterfeiting. [ABSTRACT FROM AUTHOR]