Search

Large deformability and high sensitivity is difficult to be realized simultaneously in flexible sensors. Herein, taking advantage of the high permittivity and highly active surfaces of the ultrasmall barium titanate nanoparticles (BT NPs) and the high stretchability of the p(BA‐GMA) elastomer matrix, we propose a high‐performance soft stretchable sensor. The addition of the ultrasmall BT NPs can not only increase the permittivity and capacitance of polyacrylate‐matrix composite dielectric material to obtain a high sensitivity, but also basically maintains the excellent mechanical properties of the polymer matrix. The dielectric constants of the composite films increase from 5.68 to 13.13 at 10 kHz with the increase of BT NPs content from 0 to 15 vol.%, which results in a high capacitance of 236.16 pF for 15 vol.% BT/p(BA‐GMA) sensor. Combining the high permittivity and the large deformability (a maximal deformation of 87.2%), the 15 vol.% BT/p(BA‐GMA) sensor has high sensitivity and shows high linearity and stable output even if under dynamic measurement. The dual‐mode sensor that utilizes the orthogonality of capacitance‐resistance is designed, which shows excellent performance in monitoring human body movements and noncontact measurement. The results present that the BT/p(BA‐GMA)‐based sensor has high stability and reliability not exceed 65°C, which can meet the application requirements in dynamic monitoring. [ABSTRACT FROM AUTHOR]

Polymer‐based film capacitors with high breakdown strength and excellent flexibility are crucial in the field of advanced electronic devices and electric power systems. Although massive works are carried to enhance the energy storage performances, it is still a great challenge to improve the energy density of polymer composites under the premise of large‐scale industrial production. Herein, a general strategy is proposed to improve the intrinsic breakdown strength and energy storage performances by blending core‐shell structured methyl methacrylate‐butadiene‐styrene (MBS) rubber particles into a polymer matrix. Good compatibility and uniform dispersion state of MBS particles are observed in the matrix. Polarizing microscopy images show that blended films exhibit clear reduction of crystalline grains with the addition of MBS particles. Accordingly, an increased breakdown strength of 515 MV m−1 and discharged energy density of 12.33 J cm−3 are observed in poly(vinylidene fluoride‐co‐hexafluoropropylene)‐based composite films. Through comprehensive characterizations, it is believed that the superior energy storage performance of composite films is attributed to decreased crystalline grains, improved mechanical properties, and restriction on carrier motion. These results provide a novel design of dielectric polymers for high breakdown strength and discharged energy density applications. [ABSTRACT FROM AUTHOR]

Polymer‐based dielectrics with fast electrostatic energy storage and release, are crucial for advanced electronics and power systems. However, the deterioration of insulation performance and charge–discharge efficiency of polymer dielectrics at elevated temperatures and high electric fields hinder the applications of capacitors in harsh environments. Herein, a facile and scalable approach is reported to fabricating flexible high‐temperature polymer dielectrics for high‐efficiency energy storage by ultraviolet irradiation. The resultant dielectric films exhibit an augment of 493% in energy density and exceeding 800% in discharge efficiency at 200 °C (3.2 J cm−3 and over 90% discharge efficiency at 480 M V−1m for irradiated polyetherimide (PEI), 0.54 J cm−3, and below 10% discharge efficiency at 400 MV m−1 for pristine PEI) and excellent cycle performance. The injected space charge is found to be the dominant contributor to energy loss during the charge–discharge process. Free radicals introduced by ultraviolet irradiation can act as deep traps to capture injected charge and suppress space charge migration. This work clarifies the contribution of space charge to energy loss and demonstrates the effectiveness of ultraviolet irradiation in improving the capacitive performance of high‐temperature polymer dielectrics. These findings provide a novel paradigm for the rational design of high‐temperature polymer dielectrics for high‐efficiency energy storage. [ABSTRACT FROM AUTHOR]