Search

Fully digital data acquisition systems for use in flow cytometry provide excellent flexibility and precision. Here, we demonstrate the development of a low cost, small, and low power digital flow cytometry data acquisition system using a single microcontroller chip with an integrated analog to digital converter (ADC). Our demonstration system uses a commercially available evaluation board making the system simple to integrate into a flow cytometer. We have evaluated this system using calibration microspheres analyzed on commercial, slow-flow, and CCD-based flow cytometers. In our evaluations, our demonstration data system clearly resolves all eight peaks of a Rainbow microsphere set on both a slow-flow flow cytometer and a retrofitted BD FACScalibur, which indicates it has the sensitivity and resolution required for most flow cytometry applications. It is also capable of millisecond time resolution, full waveform collection, and selective triggering of data collection from a CCD camera. The capability of our demonstration system suggests that the use of microcontrollers for flow cytometry digital data-acquisition will be increasingly valuable for extending the life of older cytometers and provides a compelling data-system design approach for low-cost, portable flow cytometers.

A digital signal processing (DSP)-based digital data acquisition system has been developed to support novel flow cytometry efforts. The system flexibility includes how it detects, captures, and processes event data. Custom data capture boards utilizing analog to digital converters (ADCs) and field programmable gate arrays (FPGA) detect events and capture correlated event data. A commercial DSP board processes the captured data and sends the results over the IEEE 1394 bus to the host computer that provides a user interface for acquisition, display, analysis, and storage. The system collects list mode data, correlated pulse shapes, or streaming data from a variety of detector types using Linux, Mac OS X, and Windows host computers. It extracts pulse features not found on commercial systems with excellent sensitivity and linearity over a wide dynamic range. List mode data are saved in FCS 3.0 formatted files while streaming or correlated waveform data are saved in custom format files for postprocessing. Open, reconfigurable cytometric acquisition system is compact, scaleable, flexible, and modular. Programmable feature extraction algorithms have exciting possibilities for both new and existing applications. The recent availability of a commercial data capture board will enable general availability of similar systems.

Flow cytometers typically incorporate expensive lasers with high-quality (TEM00) output beam structure and very stable output power, significantly increasing system cost and power requirements. Red diode lasers minimize power consumption and cost, but limit fluorophore selection. Low-cost DPSS laser pointer modules could possibly offer increased wavelength selection but presumed emission instability has limited their use. A $160 DPSS 532 nm laser pointer module was first evaluated for noise characteristics and then used as the excitation light source in a custom-built flow cytometer for the analysis of fluorescent calibration and alignment microspheres. Eight of ten modules tested were very quiet (RMS noise < or = 0.6% between 0 and 5 MHz). With a quiet laser pointer module as the light source in a slow-flow system, fluorescence measurements from alignment microspheres produced CVs of about 3.3%. Furthermore, the use of extended transit times and < or =1 mW of laser power produced both baseline resolution of all 8 peaks in a set of Rainbow microspheres, and a detection limit of <20 phycoerythrin molecules per particle. Data collected with the transit time reduced to 25 micros (in the same instrument but at 2.4 mW laser output) demonstrated a detection limit of approximately 75 phycoerythrin molecules and CVs of about 2.7%. The performance, cost, size, and power consumption of the tested laser pointer module suggests that it may be suitable for use in conventional flow cytometry, particularly if it were coupled with cytometers that support extended transit times.

Background: Previous reports have demonstrated accurate DNA fragment sizing of linear DNA fragments, from 564 to approximately 4 x 10(5) bp, in a flow system. B-phycoerythrin (B-PE), commonly used in conventional cytometric applications that require high-sensitivity, was the first fluorophore detected in flow at the single-molecule level., Methods: Dilute solutions of stained DNA fragments or B-PE were analyzed in a simplified, compact flow system, with enhanced performance and lower cost, utilizing a solid-state laser and a single-photon sensing avalanche photodiode detector (SSAPD). Extensive data processing and display software, developed specifically for the photon-counting data stream, extracts correlated height, width, and area features from bursts of photons due to discrete molecules passing through the sensing region in the flow channel., Results: DNA fragment sizing in flow has now been demonstrated for SYTOX-orange-stained fragments ranging in size over 3.4 orders of magnitude, from 125 to 5 x 10(5) bp. For Lambda bacteriophage DNA (lambda DNA; 48.5 kbp) a CV of 1.2 % has been achieved. Analysis of a femtomolar B-PE solution demonstrates that the bursts of photons from individual molecules can be baseline-resolved with 0.5 mW of laser power at a signal to noise ratio (SNR) of approximately 30, with approximately 100 photons detected from each molecule., Conclusions: A compact, low-power, high-sensitivity system detects DNA fragments as small as 125 bp or individual B-PE molecules in a flowing liquid stream. Demonstrated linearity, sensitivity, and resolution indicate that <1.0 mW of laser power is optimal, permitting further miniaturization of the system and additional cost reduction. Comprehensive analytical software exploits the standard cytometric paradigm of multiple 2D graphs and gating to extract features from classes of individually analyzed biomolecules. This complete system is thus poised to engage high-sensitivity applications not amenable to conventional flow cytometric instrumentation.

Background: The measurement of physical properties from single molecules has been demonstrated. However, the majority of single-molecule studies report values based on relatively large data sets (e.g., N > 50). While there are studies that report physical quantities based on small sample sets, there has not been a detailed statistical analysis relating sample size to the reliability of derived parameters., Methods: Monte Carlo simulations and multinomial analysis, dependent on quantifiable experimental parameters, were used to determine the minimum number of single-molecule measurements required to produce an accurate estimate of a population mean. Simulation results were applied to the fluorescence-based sizing of DNA fragments by ultrasensitive flow cytometry (FCM)., Results: Our simulations show, for an analytical technique with a 10% CV, that the average of as few as five single-molecule measurements would provide a mean value within one SD of the population mean. Additional simulations determined the number of measurements required to obtain the desired number of replicates for each subpopulation within a mixture. Application of these results to flow cytometry data for lambda/HindIII and S. aureus Mu50/SmaI DNA digests produced accurate DNA fingerprints from as few as 98 single-molecule measurements., Conclusions: A surprisingly small number of single-molecule measurements are required to obtain a mean measurement descriptive of a normally-distributed parent population., (Copyright 2004 Wiley-Liss, Inc.)

Background: Flow cytometry is a valuable tool for the study of cellular and molecular interactions. We sought to develop instrumentation that would allow accurate and precise inline dynamic temperature control of flow cytometry samples in order to expand the analytical capabilities of flow cytometry., Methods: Using a temperature controller, DC power supply, and a Peltier module, we designed a temperature control circuit that regulates the temperature of a heat transfer block. The heat transfer block surrounds the sample line to efficiently heat and cool the sample. We attached DNA oligomers to microspheres and observed the denaturation of fluorescently labeled complementary oligomers to verify that the sample was achieving the desired temperature., Results: The inline thermoregulation unit can ramp between 30 and 95 degrees C (>2 degrees C per second) within 30 s repeatedly. The accuracy of the instrument was verified by comparing the observed melting temperatures of the oligomer sets to the predicted values. These values varied within 6% of the predicted and were reproducible over a variety of conditions., Conclusions: The apparatus we constructed accurately and dynamically controls the sample temperature of inline samples. Flow cytometers equipped with our inline thermoregulation unit will be able to conveniently use temperature as a robust experimental parameter.

A modular detector for measuring multicolor fluorescence from cells illuminated by single or multiple lasers has been developed for flow cytometers. Motion picture projector, camera, and CCTV/video lenses were evaluated for use in the detector by comparing their physical characteristics, image quality, and light collection efficiencies. A 25-mm focal length F/0.95 CCTV lens was selected, based on our criteria and test results. The detector was constructed out of square aluminum extrusion channels. A CCTV lens mounted on the outside of the first channel collected light emitted from cells and collimated it towards filters and secondary CCTV lenses located in each channel. The secondary lenses functioned as relay optics for directing and focusing light onto pinhole spatial filters for measurement by photomultipliers. The detector design allowed any number of channels to be connected together and the versatility for making simultaneous or sequential measurements. Measurements on lymphocytes labeled with four monoclonal antibodies conjugated to fluorescent dyes and measurements on viable tumor cells stained for DNA content and with three fluorescent-labeled antibodies were used to demonstrate the detector's capabilities.

Axial light loss (ALL) is the measurement of the total light lost from the laser beam at 0 degrees when a particle passes through the beam. Used in combination with the monoclonal antibody CD45, ALL can effectively resolve lymphocytes, monocytes, granulocytes, and dead cells in viable or fixed preparations of human peripheral blood. A bivariate display of ALL vs. CD45 clearly resolves all granulocytes from lymphocytes; although degranulated granulocytes cannot be resolved with forward-angle and right-angle light scatter, they are clearly resolved in right-angle scatter vs. CD45. A blood differential can be performed, with a single laser flow cytometer and three colors of fluorescence, when ALL is combined with fluoresceinated CD45 to resolve leukocytes, phycoerythrin-labeled NKH1 to resolve natural killer cells, and biotinylated CD3 in combination with DuoCHROME, the phycoerythrin/Texas red conjugate fluorochrome from Becton Dickinson, to resolve T-cells. B-cells are the only cells negative for both phycoerythrin and Texas red. When PE CD4 is included, the CD3+ CD4+ T-cell subset is resolved from the CD3+ CD4- subset comprising mainly the CD3+ CD8+ T-cell subset. The addition of propidium iodide is unnecessary since ALL clearly resolves dead cells in a viable preparation of human peripheral blood. Furthermore, since ALL resolves these cells even after fixation in paraformaldehyde, all samples can be fixed prior to analysis, thereby minimizing the potential biohazard risk.