Search

Redox flow batteries (RFBs) are promising for large-scale long-duration energy storage owing to their inherent safety, decoupled power and energy, high efficiency, and longevity. Membranes constitute an important component that affects mass transport processes in RFBs, including ion transport, redox-species crossover, and the net volumetric transfer of supporting electrolytes. Hydrophilic microporous polymers, such as polymers of intrinsic microporosity (PIM), are demonstrated as next-generation ion-selective membranes in RFBs. However, the crossover of redox species and water migration through membranes are remaining challenges for battery longevity. Here, a facile strategy is reported for regulating mass transport and enhancing battery cycling stability by employing thin film composite (TFC) membranes prepared from a PIM polymer with optimized selective-layer thickness. Integration of these PIM-based TFC membranes with a variety of redox chemistries allows for the screening of suitable RFB systems that display high compatibility between membrane and redox couples, affording long-life operation with minimal capacity fade. Thickness optimization of TFC membranes further improves cycling performance and significantly restricts water transfer in selected RFB systems., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Redox flow batteries (RFBs) have great potential for long-duration grid-scale energy storage. Ion-conducting membranes are a crucial component in RFBs, allowing charge-carrying ions to transport while preventing the cross-mixing of redox couples. Commercial Nafion membranes are widely used in RFBs, but their unsatisfactory ionic and molecular selectivity, as well as high costs, limit the performance and the widespread deployment of this technology. To extend the longevity and reduce the cost of RFB systems, inexpensive ion-selective membranes that concurrently deliver low ionic resistance and high selectivity toward redox-active species are highly desired. Here, high-performance RFB membranes are fabricated from blends of carboxylate- and amidoxime-functionalized polymers of intrinsic microporosity, which exploit the beneficial properties of both polymers. The enthalpy-driven formation of cohesive interchain interactions, including hydrogen bonds and salt bridges, facilitates the microscopic miscibility of the blends, while ionizable functional groups within the sub-nanometer pores allow optimization of membrane ion-transport functions. The resulting microporous membranes demonstrate fast cation conduction with low crossover of redox-active molecular species, enabling improved power ratings and reduced capacity fade in aqueous RFBs using anthraquinone and ferrocyanide as redox couples., (© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Dibenzomethanopentacene (DBMP) is shown to be a useful structural component for making Polymers of Intrinsic Microporosity (PIMs) with promise for making efficient membranes for gas separations. DBMP-based monomers for PIMs are readily prepared using a Diels-Alder reaction between 2,3-dimethoxyanthracene and norbornadiene as the key synthetic step. Compared to date for the archetypal PIM-1, the incorporation of DBMP simultaneously enhances both gas permeability and the ideal selectivity for one gas over another. Hence, both ideal and mixed gas permeability data for DBMP-rich co-polymers and an amidoxime modified PIM are close to the current Robeson upper bounds, which define the state-of-the-art for the trade-off between permeability and selectivity, for several important gas pairs. Furthermore, long-term studies (over ≈3 years) reveal that the reduction in gas permeabilities on ageing is less for DBMP-containing PIMs relative to that for other high performing PIMs, which is an attractive property for the fabrication of membranes for efficient gas separations., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Organic solvent nanofiltration (OSN) is an emerging membrane separation technology, which urgently requires robust, easily processed, OSN membranes possessing high permeance and small solutes-selectivity to facilitate enhanced industrial uptake. Herein, we describe the use of two 2,2'-biphenol (BIPOL) derivatives to fabricate hyper-crosslinked, microporous polymer nanofilms through IP. Ultra-thin, defect-free polyesteramide/polyester nanofilms (≈5 nm) could be obtained readily due to the relatively large molecular size and ionized nature of the BIPOL monomers retarding the rate of the IP. The enhanced microporosity arises from the hyper-crosslinked network structure and monomer rigidity. Specifically, the amino-BIPOL/PAN membrane exhibits extraordinary permselectivity performances with molecular weight cut-off as low as 233 Da and MeOH permeance of ≈13 LMH/bar. Precise separation of small dye mixtures with similar M.W. based on both their charge and molecular size are achieved., (© 2022 Wiley-VCH GmbH.)

Redox flow batteries (RFBs) based on aqueous organic electrolytes are a promising technology for safe and cost-effective large-scale electrical energy storage. Membrane separators are a key component in RFBs, allowing fast conduction of charge-carrier ions but minimizing the cross-over of redox-active species. Here, we report the molecular engineering of amidoxime-functionalized Polymers of Intrinsic Microporosity (AO-PIMs) by tuning their polymer chain topology and pore architecture to optimize membrane ion transport functions. AO-PIM membranes are integrated with three emerging aqueous organic flow battery chemistries, and the synergetic integration of ion-selective membranes with molecular engineered organic molecules in neutral-pH electrolytes leads to significantly enhanced cycling stability., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Hybrid electrodes with improved O 2 tolerance and capability of CO 2 conversion into liquid products in the presence of O 2 are presented. Aniline molecules are introduced into the pore structure of a polymer of intrinsic microporosity to expand its gas separation functionality beyond pure physical sieving. The chemical interaction between the acidic CO 2 molecule and the basic amino group of aniline renders enhanced CO 2 separation from O 2 . Loaded with a cobalt phthalocyanine-based cathode catalyst, the hybrid electrode achieves a CO Faradaic efficiency of 71 % with 10 % O 2 in the CO 2 feed gas. The electrode can still produce CO at an O 2 /CO 2 ratio as high as 9:1. Switching to a Sn-based catalyst, for the first time O 2 -tolerant CO 2 electroreduction to liquid products is realized, generating formate with nearly 100 % selectivity and a current density of 56.7 mA cm -2 in the presence of 5 % O 2 ., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Membranes which allow fast and selective transport of protons and cations are required for a wide range of electrochemical energy conversion and storage devices, such as proton-exchange membrane (PEM) fuel cells (PEMFCs) and redox flow batteries (RFBs). Herein we report a new approach to designing solution-processable ion-selective polymer membranes with both intrinsic microporosity and ion-conductive functionality. Polymers are synthesized with rigid and contorted backbones, which incorporate hydrophobic fluorinated and hydrophilic sulfonic acid functional groups, to produce membranes with negatively charged subnanometer-sized confined ionic channels. The ready transport of protons and cations through these membranes, and the high selectivity towards nanometer-sized redox-active molecules, enable efficient and stable operation of an aqueous alkaline quinone redox flow battery and a hydrogen PEM fuel cell., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Microporous polymer nanosheets with thicknesses in the range 3-5 nm and with high apparent surface area (Brunauer-Emmett-Teller surface area 940 m 2 g -1 ) are formed when the effectively bifunctional (tetrafluoro) monomer used in the preparation of the prototypical polymer of intrinsic microporosity PIM-1 is replaced with an effectively tetrafunctional (octafluoro) monomer to give a tightly crosslinked network structure. When employed as a filler in mixed-matrix membranes based on PIM-1, a low loading of 0.5 wt% network-PIM-1 nanosheets gives rise to enhanced CO 2 permeability and CO 2 /CH 4 selectivity, compared to pure PIM-1., (© 2019 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The performance and safety of lithium (Li) metal batteries can be compromised owing to the formation of Li dendrites. Here, the use of a polymer of intrinsic microporosity (PIM) is reported as a feasible and robust interfacial layer that inhibits dendrite growth. The PIM demonstrates excellent film-forming ability, electrochemical stability, strong adhesion to a copper metal electrode, and outstanding mechanical flexibility so that it relieves the stress of structural changes produced by reversible lithiation. Importantly, the porous structure of the PIM, which guides Li flux to obtain uniform deposition, and its strong mechanical strength combine to suppress dendrite growth. Hence, the electrochemical performance of the anode is significantly enhanced, promising excellent performance and extended cycle lifetime for Li metal batteries., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Membrane separation for gas purification is an energy-efficient and environment-friendly technology. However, the development of high performance membranes is still a great challenge. In principle, mixed matrix membranes (MMMs) have the potential to overcome current materials limitations, but in practice there is no straightforward method to match the properties of fillers and polymers (the main components of MMMs) in such a way that the final membrane performance reflects the high performance of the microporous filler and the processability of the continuous polymer phase. This issue is especially important when high flux polymers are utilized. In this work, we demonstrate that the use of small amounts of a glassy polymer in combination with high performance PIM-1 allow for the preparation of metal-organic framework (MOF)-based MMMs with superior separation properties and low aging rates under humid conditions, meeting the commercial target for post-combustion CO 2 capture., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The use of ultrathin films as selective layers in composite membranes offers significant advantages in gas separation for increasing productivity while reducing the membrane size and energy costs. In this contribution, composite membranes have been obtained by the successive deposition of approximately 1 nm thick monolayers of a polymer of intrinsic microporosity (PIM) on top of dense membranes of the ultra-permeable poly[1-(trimethylsilyl)-1-propyne] (PTMSP). The ultrathin PIM films (30 nm in thickness) demonstrate CO 2 permeance up to seven times higher than dense PIM membranes using only 0.04 % of the mass of PIM without a significant decrease in CO 2 /N 2 selectivity., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The development of polymeric anion-exchange membranes (AEMs) combining high ion conductivity and long-term stability is a major challenge for materials chemistry. AEMs with regularly distributed fixed cationic groups, based on the formation of microporous polymers containing the V-shape rigid Tröger's base units, are reported for the first time. Despite their simple preparation, which involves only two synthetic steps using commercially available precursors, the polymers provide AEMs with exceptional hydroxide conductivity at relatively low ion-exchange capacity, as well as a high swelling resistance and chemical stability. An unprecedented hydroxide conductivity of 164.4 mS cm(-1) is obtained at a relatively a low ion-exchange capacity of 0.82 mmol g(-1) under optimal operating conditions. The exceptional anion conductivity appears related to the intrinsic microporosity of the charged polymer matrix, which facilitates rapid anion transport., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Efficient reactions between fluorine-functionalised biphenyl and terphenyl derivatives with catechol-functionalised terminal groups provide a route to large, discrete organic molecules of intrinsic microporosity (OMIMs) that provide porous solids solely by their inefficient packing. By altering the size and substituent bulk of the terminal groups, a number of soluble compounds with apparent BET surface areas in excess of 600 m(2)  g(-1) are produced. The efficiency of OMIM structural units for generating microporosity is in the order: propellane>triptycene>hexaphenylbenzene>spirobifluorene>naphthyl=phenyl. The introduction of bulky hydrocarbon substituents significantly enhances microporosity by further reducing packing efficiency. These results are consistent with findings from previously reported packing simulation studies. The introduction of methyl groups at the bridgehead position of triptycene units reduces intrinsic microporosity. This is presumably due to their internal position within the OMIM structure so that they occupy space, but unlike peripheral substituents they do not contribute to the generation of free volume by inefficient packing., (© 2015 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

A highly rigid amine-based polymer of intrinsic microporosity (PIM), prepared by a polymerization reaction involving the formation of Tröger's base, is demonstrated to act as an ionic diode with electrolyte-dependent bistable switchable states., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A highly gas permeable polymer with exceptional size selectivity is prepared by fusing triptycene units together via a poly-merization reaction involving Tröger's base formation. The extreme rigidity of this polymer of intrinsic microporosity (PIM-Trip-TB) facilitates gas permeability data that lie well above the benchmark 2008 Robeson upper bounds for the important O2 /N2 and H2 /N2 gas pairs., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A highly gas-permeable polymer with enhanced selectivities is prepared using spirobifluorene as the main structural unit. The greater rigidity of this polymer of intrinsic microporosity (PIM-SBF) facilitates gas permeability data that lie above the 2008 Robeson upper bound, which is the universal performance indicator for polymer gas separation membranes., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Quick on the uptake: Following its identification during a targeted search, the intriguing crystal structure of 3,3',4,4'-tetra(trimethylsilylethynyl)biphenyl was investigated. Simple removal of the included solvent provides an organic crystal with an open microporous structure that has a striking similarity to that of zeolite A (see picture). Reversible adsorption of nitrogen and hydrogen gases at 77 K confirms that the microporosity is permanent.

Membranes with high permeability to gases are formed from polyimides with rigid backbones that incorporate a spiro-centre. A route to this new range of high-free-volume polyimides is demonstrated, and exceptional performance is obtained for a polymer containing a dimethyl binaphthyl unit., (Copyright © 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The synthesis of octaazaphthalocyanine (AzaPc) derivatives, with bulky phenoxyl substituents placed at eight peripheral positions and containing either H(+), Ni(2+) or Zn(2+) ions in their central cavity, is described. The required precursors, derivatives of pyrazine-2,3-dicarbonitrile, were prepared using a nucleophilic aromatic substitution reaction between 2,6-diisopropylphenol or 2,6-diphenylphenol and 5,6-dichloropyrazine-2,3-dicarbonitrile. Analysis of the resulting AzaPcs by UV/Visible and (1)H NMR spectroscopy confirms that steric isolation of the AzaPc cores was enforced both in solution and in the solid state. X-ray diffraction studies of single crystals of the AzaPcs reveal that solvent inclusion takes place in each case. Of particular significance is the finding that the zinc derivative of 2,3,9,10,16,17,23,24-octa-(2,6-diisopropylphenoxy)octaazaphthalocyanine provides nanoporous cubic crystals, containing massive (8 nm(3)) solvent-filled voids, similar to those of the analogous phthalocyanine derivative. Exchange of the included solvent within the voids can be readily achieved by using a number of alternative solvents including water. Based on the observed loading of included water, the internal volume of this nanoporous cubic crystal appears to be more hydrophilic than its phthalocyanine counterpart.

Two novel homologous series of phthalocyanines were prepared from 2,2-dialkylindane and 2,2-dialkyl-1,3-benzodioxole precursors. It was anticipated that attaching alkyl chains to five-membered rings, fused to the peripheral sites of the phthalocyanine ring, would result in the adoption of an out-of-plane configuration and thereby discourage cofacial aggregation, to provide an analogy with picket-fence porphyrins. This strategy proved partially successful. Some members of the series of phthalocyanines derived from 2,2-dialkyl-1,3-benzodioxoles, in which the alkyl chains are linked to the phthalocyanine via a cyclic ketal, form spin-coated thin films in which the phthalocyanine cores are perfectly isolated. This behaviour is associated with the formation of a disordered crystal that appears as a mesophase in the thermal profile of these materials. However, the phthalocyanines derived from 2,2-dialkylindanes display a columnar mesophase over a wide temperature range, with some liquid crystalline derivatives at ambient temperature. A single-crystal X-ray diffraction structure of the octahexyl derivative of this series shows how the columnar assembly accommodates the out-of-plane alkyl chains by tilting the macrocyclic plane of the phthalocyanine components with respect to the axis of the column. This study helps to emphasise the importance of both the steric and electronic effects of substituents on the packing behaviour of phthalocyanines in the condensed phase, and especially the role of electron-donating oxygen atoms directly attached to the ring.

Novel types of microporous material are required for chemoselective adsorptions, separations and heterogeneous catalysis. This concept article describes recent research directed towards the synthesis of polymeric materials that possess microporosity that is intrinsic to their molecular structures. These polymers (PIMs) can exhibit analogous behaviour to that of conventional microporous materials, but, in addition, may be processed into convenient forms for use as membranes. The excellent performance of these membranes for gas separation and pervaporation illustrates the unique character of PIMs and suggests immediate technological applications.

Nonscattering glasses that are indefinitely stable with respect to crystallization can be prepared from the title compounds. In these solid solutions, the dendritic substituents effectively suppress interactions between the phthalocyanine units (see the structure depicted on the right)., (© 1998 WILEY-VCH Verlag GmbH, Weinheim, Fed. Rep. of Germany.)