Search

Abstract To facilitate the ongoing transition toward a circular economy, renewable 3D print materials that are both sustainable and competitive must be accessible. However, the growing demand for bio‐based thermosetting resins, which are used as ink for vat photopolymerization, gives rise to environmental concerns in terms of plastic waste management. Therefore, photocurable materials that are renewable and recyclable at the same time are needed. In this work, a mechanically robust and reprocessable 3D printed photopolymer is developed from renewable feedstock. Reaction of malic acid with glycidyl methacrylate introduces both methacrylate moieties that can undergo photopolymerization in the 3D printer, and β‐hydroxyester linkages that can act as dynamic crosslinks via bond exchange reactions. By combining modified malic acid with reactive diluents, a photoinitiator, and phosphate catalyst, three distinct resins are formulated, resulting in bio‐based contents ranging from 43% to 49%. The formulations demonstrate good layer fusion and accurate print quality, while the 3D printed specimens are robust and thermally stable. Notably, the printed object with shortest relaxation time displayed Arrhenius flow behavior with an activation energy of 36.0 kJ mol−1, and its mechanical performance is maintained after being recycled three times. This contributes to the end‐of‐life perspective of photocurable resins in additive manufacturing.

Abstract The first aim of this study is to develop a photo‐ATRP process using methyl methacrylate (MMA) by employing a novel perylenediimide derivative (PDI) as photoinitiator. The analysis of the MMA photopolymerization process kinetics is performed in solution and in bulk, demonstrating control over the reaction progress even if the polymerizations display a slow initiation step. The photo‐ATRP process for MMA in suspension is also developed and the obtained PMMA particles are further used to reinitiate the ATRP polymerization of thermoresponsive polymers (different molecular weights poly(ethylene glycol) methyl ether methacrylate and poly(N‐isopropylacrylamide)) (PNIPAM) in solution and surface‐initiated processes. The synthesized polymers by surface‐initiated process display a bimodal molecular weight distribution with a clear modification of the signal areas ratio depending on the grafted monomer and on the reaction conditions. The grafting process can take place on the surface of the polymer particles (Mn2), or it can also involve polymer chains located further at the interior of the polymer particles (Mn1). The lower critical solution temperature (LCST) transition is demonstrated for the PNIPAM functionalized polymer particles.

Abstract 3D printing is an attractive method to accurately construct artificial organs or alternative materials with complicated structures and functional performance. Naturally derived hydrogels have emerged as promising materials for the preparation of biomimetic 3D organization or scaffolds by 3D printing due to their good biocompatibility, high water content, and fascinating 3D network. However, the poor printing properties and weak structural stability of naturally derived hydrogels limit their applications. In this study, photopolymerizable hydrogels are designed based on maleic chitosan (MCS) and thiolated sodium hyaluronate (SHHA). The Michael addition between MCS and SHHA improves the viscosity of the mixed solution. Moreover, it benefits the 3D printing process, followed by photopolymerization (acrylate‐thiol step‐chain polymerization and acrylate–acrylate chain polymerization) to form a stable covalent network rapidly. The rheological property, swelling behaviors, microstructure, and in vitro degradation are tuned by adjusting the molar ratio of the thiol group and acrylate group. In addition, MCS/SHHA hydrogel scaffolds with good accuracy and enhanced structural stability are prepared using extrusion‐based 3D printing and photopolymerization technology. The hydrogels display excellent cytocompatibility and can support adherence of L929 cells, which can be used as prospective materials for tissue engineering applications.

Additive manufacturing has sought active and interactive means of creating predictable structures with diverse materials. Compared to such active manufacturing tools, current crystallization strategies remain in statistical and passive programs of crystals via macroscale thermodynamic controllers, commonly lacking active means to intervene in crystal growth in a spatiotemporal manner. Herein, a strategy toward active and interactive programming and reprogramming of crystals, realized by real-time tangible feedback on growing crystals by delicately controlling the degree of in-situ, localized photopolymerization of polymeric structures via additive manufacturing is presented. Using this strategy, crystals can be seeded, guided, and even reprogrammed in a supersaturated liquid resin. In principle, the localized formation of sparse polymeric networks within supercooled resins can induce density fluctuation to trigger seed nucleation instantaneously, whereas the formation of dense networks can lower molecules' mobilities to inhibit crystal growth. Assisted by these active triggers and deterministic procedural aspects in additive manufacturing, growing crystals can be tangibly interacted through programmed polymeric structures, strengthening deterministic characteristics in crystal growth. It is suggested that crystal growth can be programmable with deterministic hierarchies within the created crystal's morphologies within the background of inherent stochasticity in crystallization, launching an era of convolutional growth of crystals., (© 2024 Wiley‐VCH GmbH.)

The triplet excited state lifetime of a photosensitizer is an essential parameter for diffusion-controlled energy- and electron-transfer, which occurs usually in a competitive manner to the intrinsic decay of a triplet excited state. Here we show the decisive role of luminescence lifetime in the triplet excited state reactivity toward energy- and electron transfer. Anchoring two phenyl anthracene chromophores to a ruthenium(II) polypyridyl complex (Ru II ref) leads to a Ru II triad with a luminescence lifetime above 100 μs, which is more than 40 times longer than that of the prototypical complex. The obtained Ru II triad sensitizes energy transfer to anthracene-based annihilators more efficiently than Ru II ref and enables red-to-blue photon upconversion with a pseudo anti-Stokes shift of 0.94 eV and a moderate upconversion efficiency near 1 % in aerated solution. Particularly, Ru II triad allows rapid photoredox catalytic polymerizations of acrylate and acrylamide monomers under aerobic condition with red light, which are kinetically hindered for Ru II ref. Our work shows that excited state lifetime of a photosensitizer governs the dynamics of the excited state reactions, which seems an overlooked but important aspect for photochemistry., (© 2024 The Author(s). Chemistry - A European Journal published by Wiley-VCH GmbH.)

Bioelectronics holds great potential as therapeutics, but introducing conductive structures within the body poses great challenges. While implanted rigid and substrate-bound electrodes often result in inflammation and scarring in vivo, they outperform the in situ-formed, more biocompatible electrodes by providing superior control over electrode geometry. For example, one of the most researched methodologies, the formation of conductive polymers through enzymatic catalysis in vivo, is governed by diffusion control due to the slow kinetics, with curing times that span several hours to days. Herein, the discovery of the formation of biocompatible conductive structures through photopolymerization in vivo, enabling spatial control of electrode patterns is reported. The process involves photopolymerizing novel photoactive monomers, 3Es (EDOT-trimers) alone and in a mixture to cure the poly(3, 4-ethylenedioxythiophene)butoxy-1-sulfonate (PEDOT-S) derivative A5, resulting in conductive structures defined by photolithography masks. These reactions are adapted to in vivo conditions using green and red lights, with short curing times of 5-30 min. In contrast to the basic electrode structures formed through other in situ methods, the formation of specific and layered patterns is shown. This opens up the creation of more complex 3D layers-on-layer circuits in vivo., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Clinically, conventional sutures for repair of short-distance nerve injuries (< 5 mm) may contribute to uncontrolled inflammation and scar formation, thus negatively impacting nerve regeneration. To repair transected peripheral nerves with short distances, a rapid-forming, robust adhesive chitosan hydrogel is prepared by synthesizing maleic and dopamine bi-functionalized fungal-sourced chitosan (DM) and subsequently photopolymerizing DM precursor solution. The hydrogel rapidly polymerized under UV light irradiation (≈2 s) and possessed a strong adhesive strength (273.33 ± 55.07 kPa), facilitating a fast bonding of nerve stump. Especially, its tailored degradation profile over 28 days supported both early gap bridging and subsequent nerve regeneration. Furthermore, deferoxamine (DFO), a pro-angiogenic drug, is loaded into the hydrogel to reach sustainable release, accelerating axonal growth synergistically. A 3 mm long sciatic nerve defects model in rats is used to investigate the efficacy of DM@DFO hydrogel for repairing peripheral nerve defects. After 60 days, the DM@DFO hydrogel significantly outperformed conventional sutures and fibrin glue, improving motor and sensory recovery by reducing inflammation, inhibiting scar formation, and accelerating vascular regeneration within 14 days post-repair. This work highlights the DM@DFO hydrogel as a promising tissue adhesive for effective short-distance peripheral nerve repair., (© 2024 Wiley‐VCH GmbH.)

Bottlebrush polymers have a variety of useful properties including a high entanglement molecular weight, low Young's modulus, and rapid kinetics for self-assembly. However, the translation of bottlebrushes to real-world applications is limited by complex, multi-step synthetic pathways and polymerization reactions that rely on air-sensitive catalysts. Additionally, most bottlebrushes are non-degradable. Herein, we report an inexpensive, versatile, and simple approach to synthesize degradable bottlebrush polymers under mild reaction conditions. Our approach relies on the "grafting-through" polymerization of α-lipoic acid (LA)-functionalized macromonomers. These macromonomers can be polymerized under mild, catalyst-free conditions, and due to reversibility of the disulfide bond in LA, the resulting bottlebrush polymers can be depolymerized by cleaving disulfide backbone bonds. Bottlebrushes with various side-chain chemistries can be prepared through the atom transfer radical polymerization (ATRP) of LA-functionalized macromonomers, and the backbone length is governed by the macromonomer molecular weight and solvent polarity. We also demonstrate that LA-functionalized macromonomers can be copolymerized with acrylates to form degradable bottlebrush networks. This work demonstrates the preparation of degradable bottlebrush polymers with a variety of side-chain chemistries and provides insight into the light-mediated grafting-through polymerization of dithiolane-functionalized macromonomers., (© 2024 Wiley-VCH GmbH.)

Molecular photoswitches produce light-controlled changes at the nanometer scale and can therefore be used to alter the states and behavior of materials in a truly bottom-up fashion. Here an escalating photonic complexity of material property control with light is shown using a recently developed aza-diarylethene in combination with hemiindigo (HI) photoswitches. First, aza-diarylethene can be used as a photoswitch in polystyrene (PS) to reversibly inscribe relief-type 3D structures into PS. Second, aza-diarylethene can further be used as a photoinitiator for light-induced polymerization of methyl acrylate (MA), demonstrating for the first time light-controlled chemical reactivity control with its zwitterionic switching state. Third, aza-diarylethene and HIs are implemented into aza-diarylethene polymerized MA, generating photochromic polymers. At the fourth level, a binary mixture allows to synergize aza-diarylethene-induced photopolymerization with localized photochromism changes of the simultaneously entrapped functional HI. With such multilevel light response, the utility of this particular photoswitch combination for applications in advanced photonic materials is demonstrated., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

Dynamic covalent polymer networks exhibit a cross-linked structure like conventional thermosets and elastomers, although their topology can be reorganized through externally triggered bond exchange reactions. This characteristic enables a unique combination of repairability, recyclability and dimensional stability, crucial for a sustainable industrial economy. Herein the application of a photoswitchable nitrogen superbase is reported for the spatially resolved and reversible control over dynamic bond exchange within a thiol-ene photopolymer. By the exposure to UV or visible light, the associative exchange between thioester links and thiol groups is successfully gained control over, and thereby the macroscopic mechanical material properties, in a locally controlled manner. Consequently, the resulting reorganization of the global network topology enables to utilize this material for previously unrealizable advanced applications such as spatially resolved, reversible reshaping as well as micro-imprinting over multiple steps. Finally, the presented concept contributes fundamentally to the evolution of dynamic polymers and provides universal applicability in covalent adaptable networks relying on a base-catalyzed exchange mechanism., (© 2024 Wiley‐VCH GmbH.)

Vanillyl alcohol has emerged as a widely used building block for the development of biobased monomers. More specifically, the cationic (photo-)polymerization of the respective diglycidyl ether (DGEVA) is known to produce materials of outstanding thermomechanical performance. Generally, chain transfer agents (CTAs) are of interest in cationic resins not only because they lead to more homogeneous polymer networks but also because they strikingly improve the polymerization speed. Herein, the aim is to compare the cationic chain-growth photopolymerization with the thermally initiated anionic step-growth polymerization, with and without the addition of CTAs. Indeed, CTAs lead to faster polymerization reactions as well as the formation of more homogeneous networks, especially in the case of the thermal anionic step-growth polymerization. Resulting from curing above the T G of the respective anionic step-growth polymer, materials with outstanding tensile toughness (>5 MJ cm -3 ) are obtained that result in the manufacture of potential shape-memory polymers., (© 2024 The Author(s). Macromolecular Rapid Communications published by Wiley‐VCH GmbH.)

Abstract Multimaterial surfaces with hierarchical features have many potential applications in self‐cleaning, droplet manipulation, microfluidics, and biomedicine, owing to their wide range of functionalities induced by structural and material contrasts. Here, a fast and sustainable manufacturing method, acoustic assembly photopolymerization (AAP), is presented for productions of such surfaces. In the novel AAP process, an external acoustic field is used to assemble microparticles to microsized patterns, while the photocuring is combined with the acoustic assembly to produce multilevel hierarchical features, such as cones and wrinkles ranging from nanometer to micrometer. The mechanism underlying the proposed multimaterial surface structuring technique is discussed, and the relationship between process parameters and surface structures is modeled. Effects of surface material composition patterns and surface topology on the hydrodynamic properties are studied. To demonstrate potential applications, three microreactors are designed and automated droplet manipulations are demonstrated. The application of the proposed surface manufacturing approach is further extended to fog harvesting. The AAP technology and the fabricated multimaterial hierarchically‐structured surfaces demonstrated in this study can be employed in many other advanced applications in microfluidics, tissue engineering, and also potentially many other fields such as mechanical systems and battery systems.

Photocrosslinked hydrogels, such as methacrylate‐modified gelatin (gelMA) and hyaluronic acid (HAMA), are widely utilized as tissue engineering scaffolds and/or drug delivery vehicles, but lack a suitable means for noninvasive, longitudinal monitoring of surgical placement, biodegradation, and drug release. Therefore, a novel photopolymerizable X‐ray contrast agent, methacrylate‐modified gold nanoparticles (AuMA NPs), is developed to enable covalent‐linking to methacrylate‐modified hydrogels (gelMA and HAMA) in one‐step during photocrosslinking and noninvasive monitoring by X‐ray micro‐computed tomography (micro‐CT). Hydrogels exhibit a linear increase in X‐ray attenuation with increased Au NP concentration to enable quantitative imaging by contrast‐enhanced micro‐CT. The enzymatic and hydrolytic degradation kinetics of gelMA‐Au NP hydrogels are longitudinally monitored by micro‐CT for up to 1 month in vitro, yielding results that are consistent with concurrent measurements by optical spectroscopy and gravimetric analysis. Importantly, AuMA NPs do not disrupt the hydrogel network, rheology, mechanical properties, and hydrolytic stability compared with gelMA alone. GelMA‐Au NP hydrogels are thus able to be bioprinted into well‐defined 3D architectures supporting endothelial cell viability and growth. Overall, AuMA NPs enable the preparation of both conventional photopolymerized hydrogels and bioprinted scaffolds with tunable X‐ray contrast for noninvasive, longitudinal monitoring of placement, degradation, and NP release by micro‐CT.

Biological processes are inherently dynamic, necessitating biomaterial platforms capable of spatiotemporal control over cellular organization and matrix stiffness for accurate study of tissue development, wound healing, and disease. However, most in vitro platforms remain static. In this study, a dynamic biomaterial platform comprising a stiffening hydrogel is introduced and achieved through a stepwise approach of addition followed by light-mediated crosslinking, integrated with an elastomeric substrate featuring strain-responsive lamellar surface patterns. Employing this platform, the response of human induced pluripotent stem cell-derived cardiomyocytes (hIPSC-CMs) is investigated to dynamic stiffening from healthy to fibrotic tissue stiffness. The results demonstrate that culturing hIPSC-CMs on physiologically relevant healthy stiffness significantly enhances their function, as evidenced by increased sarcomere fraction, wider sarcomere width, significantly higher connexin-43 content, and elevated cell beating frequency compared to cells cultured on fibrotic matrix. Conversely, dynamic matrix stiffening negatively impacts hIPSC-CM function, with earlier stiffening events exerting a more pronounced hindering effect. These findings provide valuable insights into material-based approaches for addressing existing challenges in hIPSC-CM maturation and have broader implications across various tissue models, including muscle, tendon, nerve, and cornea, where both cellular alignment and matrix stiffening play pivotal roles in tissue development and regeneration., (© 2024 Wiley‐VCH GmbH.)

Alternating copolymers are crucial for diverse applications. While dispersity (Ð, also known as molecular weight distribution, MWD) influences the properties of polymers, achieving low dispersities in alternating copolymers poses a notable challenge via free radical polymerizations (FRPs). In this work, we demonstrated an unexpected discovery that dispersities are affected by the participation of charge transfer complexes (CTCs) formed between monomer pairs during free radical alternating copolymerization, which have inspired the successful synthesis of various alternating copolymers with low dispersities (>30 examples, Ð=1.13-1.39) under visible-light irradiation. The synthetic method is compatible with binary, ternary and quaternary alternating copolymerizations and is expandable for both fluorinated and non-fluorinated monomer pairs. DFT calculations combined with model experiments indicated that CTC-absent reaction exhibits higher propagation rates and affords fewer radical terminations, which could contribute to low dispersities. Based on the integration of Monte Carlo simulation and Bayesian optimization, we established the relationship map between FRP parameter space and dispersity, further suggested the correlation between low dispersities and higher propagation rates. Our research sheds light on dispersity control via FRPs and creates a novel platform to investigate polymer dispersity through machine learning., (© 2024 Wiley-VCH GmbH.)

Solvent-free photopolymerization of vinyl monomers to produce high modulus materials with applications in 3D printing and photoswitchable materials is demonstrated. Polymerizable eutectic (PE) mixtures are prepared by simply heating and stirring various molar ratios of N-isopropylacrylamide (NIPAM), acrylamide (AAm) and 2-hydroxyethyl methacrylate (HEMA). The structural and thermal properties of the resulting mixtures are evaluated by 1D and 2D NMR spectroscopy as well as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). UV photocuring kinetics of the PE mixtures is evaluated via in situ photo-DSC and photorheology measurements. The PE mixtures cure rapidly and display storage moduli that are orders of magnitude greater than equivalent copolymers cured in an aqueous medium. The versatility of these PE systems is demonstrated through the addition of a photoswitchable spiropyran acrylate monomer, as well as applying the PE formulation as a stereolithography (SLA)-based 3D printing resin. Due to the hydrogen-bonding network in PE systems, 3D printing of the eutectic resin is possible in the absence of crosslinkers. The addition of a RAFT agent to reduce average polymer chain length enables 3D printing of materials which retain their shape and can be dissolved on demand in appropriate solvents., (© 2024 The Authors. Macromolecular Rapid Communications published by Wiley‐VCH GmbH.)

Sustainable carbon dots based on cellulose, particularly carboxymethyl cellulose carbon dots (CMCCDs), were confined in an inorganic network resulting in CMCCDs@SiO 2 . This resulted in a material exhibiting long afterglow covering a time frame of several seconds also under air. Temperature-dependent emission spectra gave information on thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) while photocurrent experiments provided a deeper understanding of charge availability in the dark period, and therefore, its availability on the photocatalyst surface. The photo-ATRP initiator, ethyl α-bromophenylacetate (EBPA), quenched the emission from the millisecond to the nanosecond time frame indicating participation of the triplet state in photoinduced electron transfer (PET). Both free radical and controlled radical polymerization based on photo-ATRP protocol worked successfully. Metal-free photo-ATRP resulted in chain extendable macroinitiators based on a reductive mechanism with either MMA or in combination with styrene. Addition of 9 ppm Cu 2+ resulted in M w /M n of 1.4 while an increase to 72 ppm improved uniformity of the polymers; that is M w /M n =1.03. Complementary experiments with kerria laca carbon dots confined materials, namely KCDs@SiO 2 , provided similar results. Deposition of Cu 2+ (9 ppm) on the photocatalyst surface explains better uniformity of the polymers formed in the ATRP protocol., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Polymerization in the solid state is generally infeasible due to restrictions on mobility. However, in this work, the solid-state photopolymerization of crystalline dicyclopentadiene is demonstrated via photoinitiated ring-opening metathesis polymerization. The source of mobility in the solid state is attributed to the plastic crystal nature of dicyclopentadiene, which yields local short-range mobility due to orientational degrees of freedom. Polymerization in the solid state enables photopatterning, volumetric additive manufacturing of free-standing structures, and fabrication with embedded components. Solid-state photopolymerization of dicyclopentadiene offers a new paradigm for advanced and freeform fabrication of high-performance thermosets., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

In this work, six benzothioxanthene-based oxime esters were employed as photoinitiators for photopolymerization under visible light (LED) and sunlight. Their abilities to behave as Type I photoinitiators by mean of a photocleavage mechanism of oxime esters but also in multicomponent photoinitiating systems with an iodonium salt (through an electron transfer mechanism) were both explored with the different structures. Due to their broad absorption spectra tailing up 600 nm, photoinitiating properties of the benzothioxanthene-based oxime esters were systematically tested under excitation with low-intensity LED light at wavelengths of 405 nm and 450 nm. Additionally, parallel to the polymerization tests done under artificial light, the different benzothioxanthene-based oxime esters were also investigated as solar photoinitiators and displayed a high reactivity in France (Western Europe) even in winter conditions. For the best candidates i.e. the most reactive structures, direct laser write experiments were carried out, evidencing the interest of these structures., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The incorporation of functionalized nanofillers into polymers via photopolymerization approach has gained significant attention in recent years due to the unique properties of the resulting composite materials. Surface modification of nanofillers plays a crucial role in their compatibility and polymerization behavior within the polymer matrix during photopolymerization. This review focuses on the recent developments in surface modification of various nanofillers, enabling their integration into polymer systems through photopolymerization. The review discusses the key aspects of surface modification of nanofillers, including the selection of suitable surface modifiers, such as photoinitiators and polymerizable groups, as well as the optimization of modification conditions to achieve desired surface properties. The influence of surface modification on the interfacial interactions between nanofillers and the polymer matrix is also explored, as it directly impacts the final properties of the nanocomposites. Furthermore, the review highlights the applications of nanocomposites prepared by photopolymerization, such as sensors, gas separation membranes, purification systems, optical devices, and biomedical materials. By providing a comprehensive overview of the surface modification strategies and their impact on the photopolymerization process and the resulting nanocomposite properties, this review aims to inspire new research directions and innovative ideas in the development of high-performance polymer nanocomposites for diverse applications., (© 2024 Wiley‐VCH GmbH.)

Biological materials and organisms possess the fundamental ability to self-organize, through which different components are assembled from the molecular level up to hierarchical structures with superior mechanical properties and multifunctionalities. These complex composites inspire material scientists to design new engineered materials by integrating multiple ingredients and structures over a wide range. Additive manufacturing, also known as 3D printing, has advantages with respect to fabricating multiscale and multi-material structures. The need for multifunctional materials is driving 3D printing techniques toward arbitrary 3D architectures with the next level of complexity. In this paper, the aim is to highlight key features of those 3D printing techniques that can produce either multiscale or multimaterial structures, including innovations in printing methods, materials processing approaches, and hardware improvements. Several issues and challenges related to current methods are discussed. Ultimately, the authors also provide their perspective on how to realize the combination of multiscale and multimaterial capabilities in 3D printing processes and future directions based on emerging research., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

Currently, most photoredox catalysis polymerization systems are limited by high excitation power, long polymerization time, or the requirement of electron donors due to the precise design of efficient photocatalysts still poses a great challenge. Herein, we propose a new approach: the creation of efficient photocatalysts having low ground state oxidation potentials and high excited state energy levels, along with through-space charge transfer (TSCT) induced intersystem crossing (ISC) properties. A cabazole-naphthalimide (NI) dyad (NI-1) characterized by long triplet excited state lifetime (τ T =62 μs), satisfactory ISC efficiency (Φ Δ =54.3 %) and powerful reduction capacity [Singlet: E 1/2 (PC +1 /*PC)=-1.93 eV, Triplet: E 1/2 (PC +1 /*PC)=-0.84 eV] was obtained. An efficient and rapid polymerization (83 % conversion of 1 mM monomer in 30 s) was observed under the conditions of without electron donor, low excitation power (10 mW cm -2 ) and low catalyst (NI-1) loading (<50 μM). In contrast, the conversion rate was lower at 29 % when the reference catalyst (NI-4) was used for photopolymerization under the same conditions, demonstrating the advantage of the TSCT photocatalyst. Finally, the TSCT material was used as a photocatalyst in practical lithography for the first time, achieving pattern resolutions of up to 10 μm., (© 2024 Wiley-VCH GmbH.)

Investigations concerning the glyoxylate moiety as a photocleavable functional group for visible light photoinitiators, particularly in the initiation of free radical photopolymerization remain limited. This study introduces nine innovative carbazole-based ethyl glyoxylate derivatives (CEGs), which are synthesized and found to exhibit excellent photoinitiation abilities as monocomponent photoinitiating systems. Notably, these structures demonstrate robust absorption in the near-UV/visible range, surpassing the commercial photoinitiators. Moreover, the newly developed glyoxylate derivatives show higher acrylate function conversions compared to a benchmark photoinitiator (MBF) in free radical photopolymerization. Elucidation of the photoinitiation mechanism of CEGs is achieved through a comprehensive analysis involving the decarboxylation reaction and electron spin resonance spin trapping. Furthermore, their practical utility is confirmed during direct laser writing and 3D printing processes, enabling the successful fabrication of 3D printed objects. This study introduces pioneering concepts and effective strategies in the molecular design of novel photoinitiators, showcasing their potential for highly advantageous applications in 3D printing., (© 2024 The Authors. Small published by Wiley‐VCH GmbH.)

Additive manufacturing (AM) of copper through laser-based processes poses challenges, primarily attributed to the high thermal conductivity and low laser absorptivity of copper powder or wire as the feedstock. Although the use of copper salts in vat photopolymerization-based AM techniques has garnered recent attention, achieving micro-architected copper with high conductivity and density has remained elusive. In this study, we present a facile and efficient process to create complex 3D micro-architected copper structures with superior electrical conductivity and hardness. The process entails the formulation of an ion-exchangeable photoresin, followed by the utilization of digital light processing (DLP) printing to sculpt 3D hydrogel scaffolds, which were transformed into Cu 2+ -chelated polymer frameworks (Cu-CPFs) with a high loading of Cu 2+ ions through ion exchange, followed by debinding and sintering, results in the transformation of Cu-CPFs into miniaturized copper architectures. This methodology represents an efficient pathway for the creation of intricate micro-architected 3D metal structures., (© 2024 Wiley-VCH GmbH.)

The development of visible light-regulated polymerizations for precision synthesis of polymers has drawn considerable attention in the past years. In this study, an ancient dye, indigo, is successfully identified as a new and efficient photoacid catalyst, which can readily promote the ring-opening polymerization of lactones under visible light irradiation in a well-controlled manner, affording the desired polyester products with predictable molecular weights and narrow dispersity. The enhanced acidity of indigos by excitation is crucial to the H-bonding activation of the lactone monomers. Chain extension and block copolymer synthesis are also demonstrated with this method., (© 2024 Wiley‐VCH GmbH.)

The advent of covalent adaptable networks (CANs) through the incorporation of dynamic covalent bonds has led to unprecedented properties of macromolecular systems, which can be engineered at the molecular level. Among the various types of stimuli that can be used to trigger chemical changes within polymer networks, light stands out for its remote and spatiotemporal control under ambient conditions. However, most examples of photoactive CANs need to be transparent and they exhibit slow response, side reactions, and limited light penetration. In this vein, it is interesting to understand how molecular engineering of optically active dynamic linkages that offer fast response to visible light can impart "living" characteristics to CANs, especially in opaque systems. Here, the use of carbazole-based thiuram disulfides (CTDs) that offer dual reactivity as photoactivated reshuffling linkages and iniferters under visible light irradiation is reported. The fast response to visible light activation of the CTDs leads to temporal control of shape manipulation, healing, and chain extension in the polymer networks, despite the lack of optical transparency. This strategy charts a promising avenue for manipulating multifunctional photoactivated CANs in a controlled manner., (© 2024 Wiley‐VCH GmbH.)

Physiologically-relevant in vitro skin models hold the utmost importance for efficacy assessments of pharmaceutical and cosmeceutical formulations, offering valuable alternatives to animal testing. Here, an advanced immunocompetent 3D bioprinted human skin model is presented to assess skin sensitization. Initially, a photopolymerizable bioink is formulated using silk fibroin methacrylate, gelatin methacrylate, and photoactivated human platelet releasate. The developed bioink shows desirable physicochemical and rheological attributes for microextrusion bioprinting. The tunable physical and mechanical properties of bioink are modulated through variable photocuring time for optimization. Thereafter, the bioink is utilized to 3D bioprint "sandwich type" skin construct where an artificial basement membrane supports a biomimetic epidermal layer on one side and a printed pre-vascularized dermal layer on the other side within a transwell system. The printed construct is further cultured in the air-liquid interface for maturation. Immunofluorescence staining demonstrated a differentiated keratinocyte layer and dermal extracellular matrix (ECM)-remodeling by fibroblasts and endothelial cells. The biochemical estimations and gene-expression analysis validate the maturation of the printed model. The incorporation of macrophages further enhances the physiological relevance of the model. This model effectively classifies skin irritative and non-irritative substances, thus establishing itself as a suitable pre-clinical screening platform for sensitization tests., (© 2024 Wiley‐VCH GmbH.)

Photopolymerizations have garnered significant attention in polymer science due to their low polymerization temperature, high production efficiency, environmental friendliness, and spatial controllability. Despite these merits, the poor penetration and severe chemical damage from ultraviolet/visible (UV/Vis) light resources pose significant barriers to their success in conventional photopolymerizations. A recent breakthrough involving the utilization of near-infrared (NIR) laser with long wavelength has been exploited for diverse applications. With the combination of a NIR photosensitizer (PS), NIR-induced photopolymerizations have been successfully developed to alleviate the challenges in conventional methods. The enhancement of penetration depth and safety of NIR-induced photopolymerizations can contribute significantly to improving the efficiency of polymerization for production of intricate structures across various scales. In this concept, the typical types of PSs and polymerization mechanisms (PMs) within the NIR-induced photopolymerization systems have been classified in detail. Additionally, the applications of various polymers achieved by NIR-induced photopolymerizations are summarized. Furthermore, research directions and future challenges of this field are also discussed comprehensively., (© 2024 Wiley-VCH GmbH.)

The problem of plastic waste in the environment calls for the development of new polymeric materials designed specifically for easy recycling at the end of their life cycle. Herein, a green polymer system comprising a series of necklace-shaped polydimethylsiloxanes bearing anthracene dimer units is developed. The polymers have low environmental impact and are easily recycled. Further, their flexibility and glass transition temperatures are easy to control. These necklace-shaped inorganic polymers are synthesized by photopolymerizing (dimerizing) anthracene-terminated oligo-dimethylsiloxane monomers. A key achievement of the present work is the successful chemical recovery of the monomers from the polymers through thermal depolymerization, enabling monomer-polymer recycling. By applying equilibrium polymerization with base catalysts, monomers with a controlled distributed chain length are synthesized from monomers with a constant chain length. The necklace-shaped polymers synthesized from these randomized monomers have amorphous structures and readily form transparent films. It is possible to modulate the thermal and mechanical properties of the polymers by controlling the average chain length of the polydimethylsiloxane between the anthracene dimers. This investigation presents a method for the synthesis and cyclic utilization of polymer materials with a wide range of applications, including plastics and elastomers., (© 2024 Wiley‐VCH GmbH.)

Metal halide perovskites have emerged as versatile photocatalysts to convert solar energy for chemical processes. Perovskite photocatalyzed polymerization draws special attention due to its straightforward synthesis process and the ability to create advanced perovskite-polymer nanocomposites. Herein, this work employs Cs 3 Sb 2 Br 9 perovskite nanoparticles (NPs) as a lead-free photocatalyst for light-controlled atom transfer radical polymerization (ATRP). Cs 3 Sb 2 Br 9 NPs exhibit high reduction potential and interact with electronegative bromide initiator with Lewis acid Sb sites, enabling efficient photoinduced reduction of initiators and controlled polymerization under blue light irradiation. Methacrylate monomers with various functional groups are successfully polymerized, and the resulting polymer showcased a dispersity (Đ) as small as 1.27. The living nature of polymerization is confirmed by high chain end fidelity and kinetic studies. Moreover, Cs 3 Sb 2 Br 9 NPs serve as heterogeneous photocatalysts, demonstrating recyclability and reusability for up to four cycles. This work presents a promising approach to overcome the limitations of lead-based perovskites in photoinduced controlled radical polymerization, offering a sustainable and efficient alternative for the synthesis of well-defined polymeric materials., (© 2024 Wiley‐VCH GmbH.)

Artificial organs and organs-on-a-chip (OoC) are of great clinical and scientific interest and have recently been made by additive manufacturing, but depend on, and benefit from, biocompatible, biodegradable, and soft materials. Poly(octamethylene maleate (anhydride) citrate (POMaC) meets these criteria and has gained popularity, and as in principle, it can be photocured and is amenable to vat-photopolymerization (VP) 3D printing, but only low-resolution structures have been produced so far. Here, a VP-POMaC ink is introduced and 3D printing of 80 µm positive features and complex 3D structures is demonstrated using low-cost (≈US$300) liquid-crystal display (LCD) printers. The ink includes POMaC, a diluent and porogen additive to reduce viscosity within the range of VP, and a crosslinker to speed up reaction kinetics. The mechanical properties of the cured ink are tuned to match the elastic moduli of different tissues simply by varying the porogen concentration. The biocompatibility is assessed by cell culture which yielded 80% viability and the potential for tissue engineering illustrated with a 3D-printed gyroid seeded with cells. VP-POMaC and low-cost LCD printers make the additive manufacturing of high resolution, elastomeric, and biodegradable constructs widely accessible, paving the way for a myriad of applications in tissue engineering and 3D cell culture as demonstrated here, and possibly in OoC, implants, wearables, and soft robotics., (© 2023 The Authors. Advanced Healthcare Materials published by Wiley‐VCH GmbH.)

Photocuring 3D printing of hydrogels, with sophisticated, delicate structures and biocompatibility, attracts significant attention by researchers and possesses promising application in the fields of tissue engineering and flexible devices. After years of development, photocuring 3D printing technologies and hydrogel inks make great progress. Herein, the techniques of photocuring 3D printing of hydrogels, including direct ink writing (DIW), stereolithography (SLA), digital light processing (DLP), continuous liquid interface production (CLIP), volumetric additive manufacturing (VAM), and two photon polymerization (TPP) are reviewed. Further, the raw materials for hydrogel inks (photocurable polymers, monomers, photoinitiators, and additives) and applications in tissue engineering and flexible devices are also reviewed. At last, the current challenges and future perspectives of photocuring 3D printing of hydrogels are discussed., (© 2024 Wiley‐VCH GmbH.)

The fabrication of structured zeolite adsorbents through photopolymerization-based 3D printing which offers a solution to the limitations of conventional shaping techniques has been demonstrated but many parameters still need to be optimized. In this study, we studied the influence of zeolite compensation cations on the photopolymerization and the composite's properties. Modified zeolites (LTA 4 A and FAU 13X exchanged with K + , Li + , Sr 2+ , Ca 2+ or Mg 2+ ) were incorporated in PEGDA with BDMK as photoinitiator, and the formulation was cured under mild conditions (LED@405 nm, room temperature, under air). Our results indicate that the nature of zeolite compensation cations affects the colorimetric properties of polymer/zeolite composites: a better translucency parameter results in higher depth of cure. After calcination at 650 °C and complete removal of PEGDA, pure zeolitic monoliths were tested for adsorption of gas molecules of interest (carbon dioxide, dichlorobenzene and water). Structured 4 A and 13X monoliths obtained by 3D printing exhibit comparable adsorption capacity to commercial beads prepared from the same zeolites. This study enhances our understanding of the photopolymerization process involved in the production of polymer/zeolite composites. These composites are used in the fabrication of zeolitic objects through 3D printing, offering potential solutions to various environmental and dental challenges., (© 2023 Wiley-VCH GmbH.)

From the first experiments with biomaterials to mimic tissue properties, the mechanical and biochemical characterization has evolved extensively. Several properties can be described, however, what should be essential is to conduct a proper and physiologically relevant characterization. Herein, the influence of the reaction media (RM) and swelling media (SM)-phosphate buffered saline (PBS) and Dulbecco's modified Eagle's medium (DMEM) with two different glucose concentrations-is described in gelatin methacrylamide (GelMA) hydrogel mechanics and in the biological behavior of two tumoral cell lines (Caco-2 and HCT-116). All scaffolds are UV-photocrosslinked under identical conditions and evaluated for mass swelling ratio and stiffness. The results indicate that stiffness is highly susceptible to the RM, but not to the SM. Additionally, PBS-prepared hydrogels exhibited a higher photopolymerization degree according to high resolution magic-angle spinning (HR-MAS) NMR. These findings correlate with the biological response of Caco-2 and HCT-116 cells seeded on the substrates, which demonstrated flatter morphologies on stiffer hydrogels. Overall, cell viability and proliferation are excellent for both cell lines, and Caco-2 cells displayed a characteristic apical-basal polarization based on F-actin/Nuclei fluorescence images. These characterization experiments highlight the importance of conducting mechanical testing of biomaterials in the same medium as cell culture., (© 2023 The Authors. Macromolecular Bioscience published by Wiley-VCH GmbH.)

Indolo[3,2-a]carbazole alkaloids have drawn a growing interest in recent years owing to their potential electrical and optical properties. With 5,12-dihydroindolo[3,2-a]carbazole serving as the scaffold, two novel carbazole derivatives are synthesized in this study. Both compounds are extremely soluble in water, with solubility surpassing 7% in weight. Intriguingly, the introduction of aromatic substituents contributed to drastically reduce the π-stacking ability of carbazole derivatives, while the presence of the sulfonic acid groups enables the resulting carbazoles remarkably soluble in water, allowing them to be used as especially efficient water-soluble PIs in conjunction with co-initiators, i.e., triethanolamine and the iodonium salt, respectively, employed as electron donor and acceptor. Surprisingly, multi-component photoinitiating systems based on these synthesized carbazole derivatives could be used for the in situ preparation of hydrogels containing silver nanoparticles via laser write procedure with a light emitting diode (LED)@405 nm as light source, and the produced hydrogels display antibacterial activity against Escherichia coli., (© 2023 The Authors. Small published by Wiley-VCH GmbH.)

Polystyrene (PS) particles were synthesized in ethanol/water mixture by dispersion polymerization using visible light irradiation, with either a N-heterocyclic carbene borane-based photoinitiating system (PIS) or a disulfide. With the full PIS and poly(ethylene glycol) methyl ether methacrylate (PEGMA) as stabilizer, the size distributions were broad and the amount of PEGMA had a strong impact on the experiment reproducibility. The addition of a base solved the problem, leading to faster polymerizations, narrower size distributions and larger particles. With the disulfide as sole PIS, bigger and narrowly distributed PS particles were again formed. Quantitative conversion was achieved in each system, with particle size ranging between 100 and 350 nm. The use of poly(N-vinylpyrrolidone) as stabilizer led to significantly larger particles, up to 1.2 μm, with narrow size distributions. The production of such large latex particles by photoinitiated polymerizations is unprecedented., (© 2023 Wiley-VCH GmbH.)

Photoinduced reversible deactivation radical polymerization (photo-RDRP) or photoinduced controlled/living radical polymerization has emerged as a versatile and powerful technique for preparing functional and advanced polymer materials under mild conditions by harnessing light energy. While UV and visible light (λ = 400-700 nm) are extensively employed in photo-RDRP, the utilization of near-infrared (NIR) wavelengths (λ = 700-2500 nm) beyond the visible region remains relatively unexplored. NIR light possesses unique properties, including enhanced light penetration, reduced light scattering, and low biomolecule absorption, thereby providing opportunities for applying photo-RDRP in the fields of manufacturing and medicine. This comprehensive review categorizes all known NIR light-induced RDRP (NIR-RDRP) systems into four mechanism-based types: mediation by upconversion nanoparticles, mediation by photocatalysts, photothermal conversion, and two-photon absorption. The distinct photoinitiation pathways associated with each mechanism are discussed. Furthermore, this review highlights the diverse applications of NIR-RDRP reported to date, including 3D printing, polymer brush fabrication, drug delivery, nanoparticle synthesis, and hydrogel formation. By presenting these applications, the review underscores the exceptional capabilities of NIR-RDRP and offers guidance for developing high-performance and versatile photopolymerization systems. Exploiting the unique properties of NIR light unlocks new opportunities for synthesizing functional and advanced polymer materials., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

A near-infrared-absorbing heptamethine (HM + ) incorporating three bulky benzo[cd]indole heterocycles was designed to efficiently prevent self-aggregation of the dye, which results in a strong enhancement of its photoinitiating reactivity as compared to a parent bis-benzo[cd]indole heptamethine (HMCl + ) used as a reference system. In this context, we highlight an efficient free-radical NIR-polymerization up to a 100 % acrylates C=C bonds conversion even under air conditions. Such an important initiating performance was obtained by incorporating our NIR-sensitizer into a three-component system leading to its self-regeneration. This original photoredox cycle was thoroughly investigated through the identification of each intermediary species using EPR spectroscopy., (© 2023 Wiley-VCH GmbH.)

Thiol-norbornene photoclickable poly (ethylene glycol) (PEG)-based (PEG-NB) hydrogels are attractive biomaterials for cell encapsulation, drug delivery, and regenerative medicine applications. Although many crosslinking strategies and chemistries have been developed for PEG-NB bulk hydrogels, fabrication approaches of PEG-NB microgels have not been extensively explored. Here, a fabrication strategy for 4-arm amide-linked PEG-NB (PEG-4aNB) microgels using flow-focusing microfluidics for human mesenchymal stem/stromal cell (hMSCs) encapsulation is presented. PEG-4aNB photochemistry allows high-throughput, ultrafast generation, and cost-effective synthesis of monodispersed microgels (diameter 340 ± 18, 380 ± 24, and 420 ± 15 µm, for 6, 8, and 10 wt% of PEG-4aNB, respectively) using an in situ crosslinking methodology in a microfluidic device. PEG-4aNB microgels show in vitro degradability due to the incorporation of a protease-degradable peptide during photocrosslinking and encapsulated cells show excellent viability and metabolic activity for at least 13 days of culture. Furthermore, the secretory profile (i.e., MMP-13, ICAM-1, PD-L1, CXCL9, CCL3/MIP-1, IL-6, IL-12, IL-17E, TNF-α, CCL2/MCP-1) of encapsulated hMSCs shows increased expression in response to IFN-γ stimulation. Collectively, this work shows a versatile and facile approach for the fabrication of protease-degradable PEG-4aNB microgels for cell encapsulation., (© 2023 Wiley-VCH GmbH.)

Independently addressing photoreactive sites within one molecule with two colours of light is a formidable challenge. Here, we combine two sequence independent λ-orthogonal chromophores in one heterotelechelic dilinker molecule, to exploit their disparate reactivity utilizing the same reaction partner, a maleimide-containing polymer. We demonstrate that polymer network formation only proceeds if two colours of light are employed. Upon single colour irradiation, linker-decorated post-functionalized polymers are generated at either wavelength and in either sequence. Network formation, however, is only achieved by sequential or simultaneous two colour irradiation. The herein introduced photoreactive system demonstrates the power of wavelength orthogonal chemistry in macromolecular synthesis., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

A sustainable photocatalyst for use with multiple purpose comprising demethylated lignin (Fe 3 O 4 @D-wood) was made by treatment of wood and iron oxide. Characterization followed by XRD, UV/Vis, photo-current studies, and electrochemical measurements. This material became subject of photocatalytic explorations for water treatment and material synthesis by radical photopolymerization. Exposure of Fe 3 O 4 @D-wood with artificial sunlight showed an improved activity considering photochemical oxidation of organic pollutants in the presence of H 2 O 2 . The efficient generation of reactive radicals brought this system also to photopolymerization. Here, radicals based on reactive oxygen species (ROS) generated in the catalytic cycle can be seen as the dominating species to initiate radical polymerization. A mixture of UDMA and TPGDA showed good reactivity with cumene hydroperoxide (CHP). Photocatalyst used for water treatment facilitates reuse for photopolymerization., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

We report an aqueous and near-infrared (NIR) light mediated photoinduced reversible addition-fragmentation chain transfer (photo-RAFT) polymerization system catalyzed by tetrasulfonated zinc phthalocyanine (ZnPcS 4 - ) in the presence of peroxides. Taking advantage of its fast polymerization rates and high oxygen tolerance, this system is successfully applied for the preparation of hydrogels. Exploiting the enhanced penetration of NIR light, photoinduced gelation is effectively performed through non-transparent biological barriers. Notably, the RAFT agents embedded in these hydrogel networks can be reactivated on-demand, enabling the hydrogel healing under NIR light irradiation. In contrast to the minimal healing capability (<15 %) of hydrogels prepared by free radical polymerization (FRP), RAFT-mediated networks display more than 80 % recovery of tensile strength. Although healable polymer networks under UV and blue lights have already been established, this work is the first photochemistry system using NIR light, facilitating photoinduced healing of hydrogels through thick non-transparent barriers., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

We report a unique vinyl coordination polymer (CP), [Zn(4-Fb) 2 (tkpvb)] n (1, 4-HFb=4-fluorobenzoic acid, tkpvb=1,2,4,5-tetrakis(4-pyridylvinyl)benzene) that undergoes a rare photopolymerization reaction to form a two-dimensional CP integrated with a one-dimensional linear organic polymer. Upon light irradiation at different wavelengths, 1 exhibits an unprecedented phenomenon of photoinduced nonlinear lattice expansion. 1 can be uniformly dispersed in polyvinyl alcohol (PVA) to form the composite film of 1-PVA. When this film is exposed to UV light, internal minute stresses within crystallites are released by lattice expansion, resulting in a variety of photopolymerization-driven macroscopic mechanical motions. The findings provide new insights into the conversion of small lattice expansions of CPs into macroscopic mechanical motions based on photopolymerization reactions, which can promote the development of CPs-based smart photoactuators in the burgeoning field of microrobotics., (© 2023 Wiley-VCH GmbH.)

Fluorine-containing polymers are one of the most useful materials among various polymers. In this study, we have developed synthesis methods for fluorine-containing polymers through sequential and chain polymerization based on the generation of perfluoroalkyl radicals by photoirradiation halogen bonding of perfluoroalkyl iodide and amines. In sequential polymerization, fluoroalkyl-alkyl-alternating polymers were synthesized by the polyaddition of diene and diiodoperfluoroalkane. In chain polymerization, polymers with perfluoroalkyl terminals were synthesized by polymerization of general-purpose monomers, with perfluoroalkyl iodide as the initiating species. Block polymers were also synthesized by successive chain polymerization to the polyaddition product., (© 2023 Wiley-VCH GmbH.)

High energy photons (λ < 400 nm) are frequently used to initiate free radical polymerizations to form polymer networks, but are only effective for transparent objects. This phenomenon poses a major challenge to additive manufacturing of particle-reinforced composite networks since deep light penetration of short-wavelength photons limits the homogeneous modification of physicochemical and mechanical properties. Herein, the unconventional, yet versatile, multiexciton process of triplet-triplet annihilation upconversion (TTA-UC) is employed for curing opaque hydrogel composites created by direct-ink-write (DIW) 3D printing. TTA-UC converts low energy red light (λ max  = 660 nm) for deep penetration into higher-energy blue light to initiate free radical polymerizations within opaque objects. As proof-of-principle, hydrogels containing up to 15 wt.% TiO 2 filler particles and doped with TTA-UC chromophores are readily cured with red light, while composites without the chromophores and TiO 2 loadings as little as 1-2 wt.% remain uncured. Importantly, this method has wide potential to modify the chemical and mechanical properties of complex DIW 3D-printed composite polymer networks., (© 2023 Wiley-VCH GmbH.)

3D printing technology offers solutions for numerous needs in industry and the daily life of individuals. In recent years, most research efforts have focused on this technology as the market share has grown and requirements have become specified in their related fields. In this work, a novel visible light induced 3D printing system with high resolution and short printing time using dimanganese decacarbonyl (Mn 2 (CO) 10 ) in combination with organic halides is reported. The radicals formed through halogen abstraction by photochemically generated manganese pentacarbonyl from organic halides with high quantum efficiency initiate the polymerization of acrylic resins. The kinetics of the process using various halide-containing molecules in the photoinitiaiting system are investigated with real-time fourrier transform infrared spectroscopy and photo-differential scanning calorimetry analyses, and the characteristics of 3D printouts are presented and compared with that of the commercial photoinitiator, 2,4,6-trimethylbenzoyl)phosphine oxide without Mn 2 (CO) 10 . The results obtained confirm that the combination of Mn 2 (CO) 10 and structurally diverse organic halides is a class of promising 3D system for various applications., (© 2022 Wiley-VCH GmbH.)

Herein, the successful development of a metal-free, solution [2 + 2] photopolymerization of natural cinnamic acid-derived bisolefinic monomers is reported, which is enabled by a strategy based on direct triplet state access via energy transfer catalysis. 2,2'-Methoxythioxanthone has been identified as an effective organic photocatalyst for the [2 + 2] photopolymerization in solution, which can be excited by visible light and activate the biscinnamate monomers via triplet energy transfer. This method features its metal-free conditions, visible light utilization, solution polymerization, and abundant biomass-based feedstock, as well as processable polymer products, which is different from the rigid, insoluble products obtained from solid-state photopolymerization. This solution polymerization method also shows a good compatibility to monomer structures; cinnamic acid-derived bisolefinic monomers with different linkers, including diamine, natural diol, and bisphenol, can all readily undergo [2 + 2] photopolymerization, and be transformed into colorless, sustainable polymers., (© 2022 Wiley-VCH GmbH.)

The conversion of liquid resin into solid structures upon exposure to light of a specific wavelength is known as photopolymerization. In recent years, photopolymerization-based 3D printing has gained enormous attention for constructing complex tissue-specific constructs. Due to the economic and environmental benefits of the biopolymers employed, photo-curable 3D printing is considered an alternative method for replacing damaged tissues. However, the lack of suitable bio-based photopolymers, their characterization, effective crosslinking strategies, and optimal printing conditions are hindering the extensive application of 3D printed materials in the global market. This review highlights the present status of various photopolymers, their synthesis, and their optimization parameters for biomedical applications. Moreover, a glimpse of various photopolymerization techniques currently employed for 3D printing is also discussed. Furthermore, various naturally derived nanomaterials reinforced polymerization and their influence on printability and shape fidelity are also reviewed. Finally, the ultimate use of those photopolymerized hydrogel scaffolds in tissue engineering is also discussed. Taken together, it is believed that photopolymerized 3D printing has a great future, whereas conventional 3D printing requires considerable sophistication, and this review can provide readers with a comprehensive approach to developing light-mediated 3D printing for tissue-engineering applications., (© 2022 Wiley-VCH GmbH.)