Search

Perovskite quantum dots (PQDs) photoresists are promising building blocks for photolithographically patterned devices. However, their complex synthesis and combination processes limit their optical properties and potential patterning applications. Here, we present an exceptionally simple strategy for the synthesis of PQDs photoresist. Unlike traditional approaches that involve centrifugation, separation, and combination processes, our direct synthesis technique using polymerizable acrylic monomer as solvent to fabricate PQDs photoresists without complex post-synthesis process. We demonstrate that the change in solubility of the precursors is the main reason for the formation of PQDs in the polymerizable monomer. By direct photolithography, colorful PQD patterns with high photoluminescence quantum yields and high thickness are successfully demonstrated. This work opens a new avenue for the direct synthesis of PQDs photoresist, expanding their applications in various integrated applications, such as photonic, energy harvesting, and optoelectronic devices., (© 2024 Wiley-VCH GmbH.)

Organic near-infrared room temperature phosphorescence (RTP) materials offer remarkable advantages in bioimaging due to their characteristic time scales and background noise elimination. However, developing near-infrared RTP materials for deep tissue imaging still faces challenges since the small band gap may increase the non-radiative decay, resulting in weak emission and short phosphorescence lifetime. In this study, fused-ring pyrrole-based structures were employed as the guest molecules for the construction of long wavelength emissive RTP materials. Compared to the decrease of the singlet energy level, the triplet energy level showed a more effectively decrease with the increase of the conjugation of the substituent groups. Moreover, the sufficient conjugation of fused ring structures in the guest molecule suppresses the non-radiative decay of triplet excitons. Therefore, a near-infrared RTP material (764 nm) was achieved for deep penetration bioimaging. Tumor cell membrane is used to coat RTP nanoparticles (NPs) to avoid decreasing the RTP performance compared to traditional coating by amphiphilic surfactants. RTP NPs with tumor-targeting properties show favorable phosphorescent properties, superior stability, and excellent biocompatibility. These NPs are applied for time-resolved luminescence imaging to eliminate background interference with excellent tissue penetration. This study provides a practical solution to prepare long-wavelength and long-lifetime organic RTP materials and their applications in bioimaging., (© 2023 Wiley-VCH GmbH.)

The development of flexible, room-temperature phosphorescence (RTP) materials remains challenging owing to the quenching of their unstable triplet excitons via molecular motion. Therefore, a polymer matrix with T g higher than room temperature is required to prevent polymer segment movement. In this study, a RTP material was developed by incorporating a 4-biphenylboronic acid (BPBA) phosphor into a poly(vinylidene fluoride) (PVDF) matrix (T g =-27.1 °C), which exhibits a remarkable UV-light-dependent oxygen consumption phosphorescence with a lifetime of 1275.7 ms. The adjustable RTP performance is influenced by the crystallinity and polymorph (α, β, and γ phases) fraction of PVDF, therefore, the low T g of the PVDF matrix enables the polymeric segmental motion upon microwave irradiation. Consequently, a reduction in the crystallinity and an increase in the α phase fraction in PVDF film induces RTP after 2.45 GHz microwave irradiation. These findings open up new avenues for constructing crystalline and phase-dependent RTP materials while demonstrating a promising approach toward microwave detection., (© 2023 Wiley-VCH GmbH.)

Chiral aggregation-induced emission (AIE) molecules have drawn attention for their helical self-assembly and special optical properties. The helical self-assembly of AIE-active chiral non-linear main-chain polymers can produce some desired optical features. In this work, a series of V-shaped chiral AIE-active polyamides P1-C3, P1-C6, P1-C12 and linear P2-C3, P2-C6, bearing n-propyl/hexyl/dodecyl side-chains, based on tetraphenylbutadiene (TPB), were prepared. All target main-chain polymers exhibit distinct AIE characteristics. The polymer P1-C6 with moderate length alkyl chains shows better AIE properties. The V-shaped main-chains and the chiral induction of (1R,2R)-(+)-1,2-cyclohexanediamine in each repeating unit promote the polymer chains display helical conformation, and multiple helical polymer chains induce nano-fibers helicity when the polymer chains aggregate and self-assemble in THF/H 2 O mixtures. Simultaneously, the helical conformation polymer chains and helical nano-fibers cause P1-C6 produce strong circular dichroism (CD) signals with positive Cotton effect. Moreover, P1-C6 could also occur fluorescence quenching response to Fe 3+ selectively with a low detection limit of 3.48 μmol/L., (© 2023 Wiley-VCH Verlag GmbH.)

Photodynamic immunotherapy is a promising treatment strategy that destroys primary tumors and inhibits the metastasis and relapse of distant tumors. As reactive oxygen species are an intermediary for triggering immune responses, photosensitizers (PSs) that can actively target and efficiently trigger oxidative stress are urgently required. Herein, pyrrolo[3,2-b]pyrrole as an electronic donor is introduced in acceptor-donor-acceptor skeleton PSs (TP-IS1 and TP-IS2) with aggregation-induced emission properties and high absorptivity. Meanwhile, pyrrolo[3,2-b]pyrrole derivatives innovatively prove their ability of type I photoreaction, indicating their promising hypoxia-tolerant advantages. Moreover, M1 macrophages depicting an ultrafast delivery through the cell-to-cell tunneling nanotube pathway emerge to construct TP-IS1@M1 by coating the photosensitizer TP-IS1. Under low concentration of TP-IS1@M1, an effective immune response of TP-IS1@M1 is demonstrated by releasing damage-associated molecular patterns, maturating dendritic cells, and vanishing the distant tumor. These findings reveal insights into developing hypoxia-tolerant PSs and an efficient delivery method with unprecedented performance against tumor metastasis., (© 2022 Wiley-VCH GmbH.)

Monotonous luminescence has always been a major factor limiting the application of organic room-temperature phosphorescence (RTP) materials. Enhancing and regulating the intermolecular interactions between the host and guest is an effective strategy to achieve excellent phosphorescence performance. In this study, intermolecular halogen bonding (CN⋅⋅⋅Br) was introduced into the host-guest RTP system. The interaction promoted intersystem crossing and stabilized the triplet excitons, thus helping to achieve strong phosphorescence emission. In addition, the weak intermolecular interaction of halogen bonding is sensitive to external stimuli such as heat, mechanical force, and X-rays. Therefore, the triplet excitons were easily quenched and colorimetric multi-stimuli responsive behaviors were realized, which greatly enriched the luminescence functionality of the RTP materials. This method provides a new platform for the future design of responsive RTP materials based on weak intermolecular interactions between the host and guest molecules., (© 2022 Wiley-VCH GmbH.)

Multicomponent spiropolymerization (MCSP) provides an efficient synthetic tool for the construction of spiropolymers based on nonspiro monomers. In this study, a method of MCSP using diisocyanides 1, diethyl acetylenedicarboxylate 2, and halogenated quinones 3 is developed for the in situ construction of bis-spiropolymers with high molecular weights (M w up to 29 200) and good yields (up to 87.7%) under mild reaction conditions. The structure of the obtained bis-spiropolymers is confirmed by gel permeation chromatography, Fourier transform infrared spectroscopy, and nuclear magnetic resonance analysis. Halogenated bis-spiropolymers show good thermal stability, good solubility, and film-forming ability. The photosensitizer rhodamine B is used as a doping agent to induce the photodegradation of the polymer P1a3c into small-molecule segments, which results in the slow release of halogenated spiro-groups under irradiation with simulated sunlight. This finding reveals that P1a3c has the potential to be applied in pesticides. Therefore, this MCSP is a novel method for preparing halogen-containing bis-spiropolymers, which accelerates the development of multifunctional polymer materials., (© 2021 Wiley-VCH GmbH.)

Polymers containing iminofuran (PIFs) are rarely reported due to the lack of simple and effective synthesis methods. In this work, a novel multicomponent cyclopolymerization (MCCP) of diisocyanides, activated alkynes, and 1,4-dibromo-2,3-butanedione using catalyst-free one-pot reactions under mild conditions to prepare PIFs containing bromomethyl groups is reported. PIFs with good solubility and thermal stability are obtained with high M w s (up to 19 600) and good yields (up to 89.5%) under optimized polymerization conditions. The structure of the PIFs is characterized by nuclear magnetic resonance, Fourier transform infrared spectroscopy, and gel permeation chromatography. The photophysical properties indicate that polymers P1a2b3 and P1c2b3 have cluster-triggered emission characteristics. Thin films made from PIFs quickly degrade under UV irradiation. Moreover, the obtained polymers are decorated with bromomethyl and carboxylate groups in the side chain, which can be postfunctionalized to prepare multifunctional materials, such as star branched polymers and biomedical carrier materials. Thus, this work not only enriches the field of polymerization based on isocyanates and activated alkynes but also provides a facile strategy toward functional iminofuran polymers., (© 2020 Wiley-VCH GmbH.)

Increasing the quantum yield of near-infrared (NIR) emissive dyes is critical for biological applications because these fluorescent dyes generally show decreased emission efficiency under aqueous conditions. In this work, we designed and synthesized several multiarylpyrrole (MAP) derivatives, in which a furanylidene (FE) group at the 3-position of the pyrrole forms donor-π-acceptor molecules, MAP-FE, with a NIR emissive wavelength and aggregation-enhanced emission (AEE) features. Different alkyl chains of MAP-FEs linked to phenyl groups at the 2,5-position of the pyrrole ring resulted in different emissive wavelengths and quantum yields in aggregated states, such as powders or single crystals. Powder XRD data and single crystal analysis elucidated that the different lengths of alkyl chains had a significant impact on the regularity of MAP-FEs when they were forced to aggregate or precipitate, which affected the intermolecular interaction and the restriction degree of the rotating parts, which are essential components. Therefore, an increasing number of NIR dyes could be developed by this design strategy to produce efficient NIR dyes with AEE. Moreover, this method can provide general guidance for other related fields, such as organic solar cells and organic light-emitting materials, because they are all applied in the aggregated state., (© 2020 Wiley-VCH GmbH.)

Organic materials with long-lived, color-tunable phosphorescence are potentially useful for optical recording, anti-counterfeiting, and bioimaging. Herein, we develop a series of novel host-guest organic phosphors allowing dynamic color tuning from the cyan (502 nm) to orange red (608 nm). Guest materials are employed to tune the phosphorescent color, while the host materials interact with the guest to activate the phosphorescence emission. These organic phosphors have an ultra-long lifetime of 0.7 s and a maximum phosphorescence efficiency of 18.2 %. Although color-tunable inks have already been developed using visible dyes, solution-processed security inks that are temperature dependent and display time-resolved printed images are unprecedented. This strategy can provide a crucial step towards the next-generation of security technologies for information handling., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Heteroatom-containing spiropolymers were constructed in a facile manner by a catalyst-free multicomponent spiropolymerization route. P1a2b as the most potent of these spiropolymers, demonstrates cluster-triggered emission resulting from strong interactions with the MDM2 protein. By preventing the anti-apoptotic p53/MDM2 interaction, P1a2b triggers apoptosis in cancerous cells, while demonstrating a good biocompatibility and non-toxicity in non-cancerous cells. The combined results from solution and cell-based cluster-triggered emission studies, docking, protein expression experiments and cytotoxicity data strongly support the MDM2-binding hypothesis and indicate a potential application as a fluorescent cancer marker as well as therapeutic for this spiropolymer., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Five organic luminophores, 1,2,5-triphenylpyrrole (TPP) derivatives 3 a-e bearing electron-withdrawing or electron-donating groups, have been synthesized by Pd-catalyzed Suzuki coupling of 1-phenyl-2,5-di(4'-bromophenyl)pyrrole and para-substituted phenylboronic acid derivatives. They possess good thermal stabilities with high decomposition temperatures above 310 °C. Investigation of the photophysical properties of the luminogens 3 a-e indicated that they exhibited dual intense photoluminescence in both solution and the solid state due to their twisted conformations, and their fluorescence quantum yields (Φ F ) were determined as 68.7-94.9 % in THF solution and 19.1-52.0 % in solid powder form. Compounds 3 a-c bearing electron-accepting groups exhibited remarkable solvatochromism with large Stokes shifts, attributable to their D-π-A structure and intramolecular charge-transfer effect. In particular, 3 a, bearing aldehyde groups, displayed an obvious red-shift of the emission band from 445 to 564 nm with increasing solvent polarity. However, no obvious solvatochromic behavior was observed for compounds 3 d,e bearing electron-donating groups. The luminophore 3 a exhibited polymorphic luminescence properties and crystallization-induced emission enhancement., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Organic functional materials, including conjugated molecules and fluorescent dyes, have been intensely developed in recent years because they can be applied in many fields, such as solar cells, biosensing and bioimaging, and medical adjuvant therapy. Organic functional materials with aggregation-induced emission or aggregation-enhanced emission (AIE/AEE) characteristics have increasingly attracted attention due to their high quantum efficiency in the aggregated or solid state. A large variety of AIE/AEE materials have been designed and applied during the exponential growth of research interest in the abovementioned fields. Multiphenyl-substituted 1,3-butadiene (MPB), as a core structure that includes tetraphenyl-1,3-butadiene, hexaphenyl-1,3-butadiene and their derivatives, show a typical AIE/AEE feature and can be potentially used in all the above-mentioned fields. This review summarizes the design principles, the corresponding syntheses, and the structure-property relationships of MPBs, as well as their excellent innovative functionalities and applications. This review will be useful for scientists conducting chemistry, materials, and biomedical research in AIE/AEE-related fields., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

2,3,4,5-Tetraphenyl-1H-pyrrole (TePP) was synthesized by a simple one-step reaction. The compound showed a balanced emission in both the solution and solid state with the absolute quantum yield of Φ F/THF =65.6 % and Φ F/solid =74.3 %, respectively. Temperature and viscosity variation measurements demonstrated that the phenyl group at the 1-position (N-position) of the pyrrole core can act as a rotor in pyrrole-based molecules, which can consume the excited energy and reduce the molecular emission in solution. TePP without the phenyl group at the 1-position can effectively enhance the emission in solution. Single-crystal analysis showed that the phenyl groups at the 2,5-positions of pyrrole extend the molecular conjugation and lock the conformation. The phenyl groups at the 3,4-positions with a twisted conformation prevent their molecules from close packing and are helpful for aggregated emission. A delicate balance between the twisting conformation and rigid conjugation takes advantage of both ACQ and AIE luminogens. The strategy can tune the AIE, ACQ, or solution and solid dual-state emission properties of pyrrole-based molecules by simply altering the position of phenyl groups, which provides a great opportunity to explore the luminescent mechanism in greater detail and to facilitate practical applications., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Eight donor-π-acceptor (D-π-A) compounds employing triphenylpyrrole isomers (TPP-1,2,5 and TPP-1,3,4) as donors, malononitrile (CN) and 1H-indene-1,3(2H)-dione (CO) as acceptors, pyridone (P) and benzopyran (B) as π-linking groups were synthesized. The compounds exhibited aggregation-induced emission and piezochromic properties. Compared with previously reported donors, triphenylpyrroles induced all the compounds to have more remarkable photophysical properties. The compounds containing TPP-1,2,5 and P moieties displayed stronger fluorescence intensities, shorter emission wavelengths, and more distinct piezochromic properties. However, the same phenomenon was observed in the TPP-1,3,4-containing system if B was as π-linker. Moreover, the CN acceptor endowed the compound to have a relatively strong fluorescent intensity, in which CO induced a relatively long emission wavelength. That is, the photophysical properties of D-π-A compounds can be controlled by adjusting the structure of donor, linker and acceptor., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Three tetra-aryl substituted 1,3-butadiene derivatives with aggregation enhanced emission (AEE) and mechanochromic fluorescence behavior have been rationally designed and synthesized. The results suggest an effective design strategy for developing diverse materials with aggregation induced emission (AIE) and significant mechanochromic performance by employing D-π-A structures with large dipole moments., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A neutral polyfluorene derivative that contains 20 mol% 2,1,3-benzothiadiazole (BT) is synthesized by Suzuki cross-coupling polymerization. A cationic conjugated polymer A and an alpha-mannose-bearing polymer B are subsequently obtained through different post-polymerization methods. As a result of the charged pendant groups or sugar-bearing groups attached to the polymer side chains, both A and B show good water-solubility. The titration of Concanavalin A (Con A) into polymer aqueous solution leads to different fluorescent responses for polymers A and B. Polymer A does not show any obvious fluorescence change upon interaction with Con A, whereas polymer B shows fluorescence increase in BT emission intensity when Con A is added. This is because of the specific interaction between alpha-mannose and Con A, which induces polymer aggregation, and then facilitates energy transfer from the phenylene-fluorene segments to the BT units. A practical calibration curve ranging from 1 nM to 250 nM is obtained by correlating the changes in BT emission intensity with Con A concentration. The advantage of polymer B-based Con A macromolecular probe is that it shows signal increase upon Con A recognition, which is significantly different from other conjugated polymer-based fluorescence quenching assays.