Search

Abstract An increase in the environmental and health concerns over fluorochemical‐based, wax‐based, and extrusion‐based paper coatings has led to a growing interest in bio‐based, biodegradable, and repulpable alternatives to obtain water‐ and oil‐repellent coatings. Reported herein is a fluorine‐free, plastic‐free, and cost‐effective water and grease resistant paper coating approach that utilizes blends of corn‐starch (S) and a novel chitosan‐graft‐polydimethylsiloxane (CP) copolymer. The hydrophobic and oleophobic performance of the S/CP‐coated paper was evaluated by varying the ratio of S and CP in the overall blend. The S/CP‐coated papers were observed to have low cobb60 values (water absorptivity) of 13 ± 0.9 g m−2 and an excellent kit rating (oil resistance) of 12/12. The S/CP‐coated paper substrate surface profile was analyzed via scanning electron microscopy (SEM). The repulpability of the coated paper is also demonstrated by washing the coating materials from the paper and recovering the pulp.

Electrochemical paper-based microfluidics has attracted much attention due to the promise of transforming point-of-care diagnostics by facilitating quantitative analysis with low-cost and portable analyzers. Such devices harness capillary flow to transport samples and reagents, enabling bioassays to be executed passively. Despite exciting demonstrations of capillary-driven electrochemical tests, conventional methods for fabricating electrodes on paper impede capillary flow, limit fluidic pathways, and constrain accessible device architectures. This account reviews recent developments in paper-based electroanalytical devices and offers perspective by revisiting key milestones in lateral flow tests and paper-based microfluidics engineering. The study highlights the benefits associated with electrochemical sensing and discusses how the detection modality can be leveraged to unlock novel functionalities. Particular focus is given to electrofluidic platforms that embed electrodes into paper for enhanced biosensing applications. Together, these innovations pave the way for diagnostic technologies that offer portability, quantitative analysis, and seamless integration with digital healthcare, all without compromising the simplicity of commercially available rapid diagnostic tests., (© 2024 The Authors. Small published by Wiley‐VCH GmbH.)

Salmonella, the most prevalent food-borne pathogen, poses significant medical and economic threats. Swift and accurate on-site identification and serotyping of Salmonella is crucial to curb its spread and contamination. Here, a synthetic biology cascade reaction is presented on a paper substrate using CRISPR-Cas12a and recombinase polymerase amplification (RPA), enabling the programming of a standard toehold RNA switch for a genome of choice. This approach employs just one toehold RNA switch design to differentiate between two different Salmonella serotypes, i.e., S. Typhimurium and S. Enteritidis, without the need for reengineering the toehold RNA switch. The sensor exhibits high sensitivity, capable of visually detecting as few as 100 copies of the whole genome from a model Salmonella pathogen on a paper substrate. Furthermore, this robust assay is successfully applied to detect whole genomes in contaminated milk and lettuce samples, demonstrating its potential in real sample analysis. Due to its versatility and practical features, genomes from different organisms can be detected by merely changing a single RNA element in this universal cell-free cascade reaction., (© 2024 Wiley‐VCH GmbH.)

We developed a simple, paper-based device that enables sensitive detection by mass spectrometry (MS) without solid phase extraction or other sample preparation. Using glass fiber filter papers within a 3D printed holder, the device employs electrokinetic manipulations to stack, separate, and desalt charged molecules on paper prior to spray into the MS. Due to counter-balanced electroosmotic flow and electrophoresis, charged analytes stack on the paper and desalting occurs in minutes. One end of the paper strip was cut into a sharp point and positioned near the inlet of a MS. The stacked analyte bands move toward the paper tip with the EOF where they are ionized by paper spray. The device was applied to analysis of PFAS in tap water with sub part-per-trillion detection limits in less than ten minutes with no sample pretreatment. Analysis of opioids in urine also occurs in minutes. The crucial parameters to enable stacking, separation, and MS ionization of both positively and negatively charged analytes were determined and optimized. Experimental and computational modeling studies confirm the electrokinetic stacking and analyte transport mechanisms. On-paper separations were carried out by stacking analyte bands at different locations depending on their electrophoretic mobility, achieving baseline separation in some cases., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Bioelectronic implants delivering electrical stimulation offer an attractive alternative to traditional pharmaceuticals in electrotherapy. However, achieving simple, rapid, and cost-effective personalization of these implants for customized treatment in unique clinical and physical scenarios presents a substantial challenge. This challenge is further compounded by the need to ensure safety and minimal invasiveness, requiring essential attributes such as flexibility, biocompatibility, lightness, biodegradability, and wireless stimulation capability. Here, a flexible, biodegradable bioelectronic paper with homogeneously distributed wireless stimulation functionality for simple personalization of bioelectronic implants is introduced. The bioelectronic paper synergistically combines i) lead-free magnetoelectric nanoparticles (MENs) that facilitate electrical stimulation in response to external magnetic field and ii) flexible and biodegradable nanofibers (NFs) that enable localization of MENs for high-selectivity stimulation, oxygen/nutrient permeation, cell orientation modulation, and biodegradation rate control. The effectiveness of wireless electrical stimulation in vitro through enhanced neuronal differentiation of neuron-like PC12 cells and the controllability of their microstructural orientation are shown. Also, scalability, design flexibility, and rapid customizability of the bioelectronic paper are shown by creating various 3D macrostructures using simple paper crafting techniques such as cutting and folding. This platform holds promise for simple and rapid personalization of temporary bioelectronic implants for minimally invasive wireless stimulation therapies., (© 2024 Wiley‐VCH GmbH.)

Developing paper-based electrophoretic methods involve dealing with significant uncertainty levels when compared to their capillary counterparts. Critical information for developing these kinds of methods are the electrophoretic mobility of background electrolytes and samples. This work presents the design and characterization of a device for measuring the electrophoretic mobilities of dyes in porous media. The device was developed with the aim of validating a previously presented model and also proposing a protocol for the straightforward determination of electrophoretic mobilities in porous media when open-channel values are already known. Whatman #1 paper was used as a model substrate as far as it is the most common porous medium substrate for paper-based electrophoresis. The device was designed using a numerical simulation-assisted approach, utilizing OpenFOAM® and specific solvers for capillary transport and electromigration, namely porousMicroTransport and electroMicroTransport, respectively. The electrophoretic mobilities of five dyes were analyzed experimentally with the proposed device. To establish appropriate comparative values at different pHs, experiments in fused silica capillaries were also performed. An effective parameter model for describing the electrophoretic behavior of dyes in porous media, that is, the constriction factor, was found consistent with previous reports for the Whatman #1 paper. This consistency was found after considering (via direct measurements) the chromatographic effect of the medium over each dye. Consequently, the recorded values hold significant worth due to their potential for direct application in designing new experiments or devices in Whatman #1 paper. With the validation of the model through the experiments with the proposed device, those researchers interested on developing electrophoretic methods in porous substrates can make use of the open-channel electrophoretic mobilities reported in the literature, or in the well-known software databases, and correct them for the media of interest just by performing two simple characterization steps., (© 2023 Wiley‐VCH GmbH.)

The research presented in this paper introduces a novel environmental energy-harvesting technology that harnesses electricity from the evaporation of water using porous structural materials. Specifically, a strategy employing paper-based hydroelectric generators (p-HEGs) is proposed to capture the energy produced during water evaporation and convert it into usable electricity. The p-HEGs offer several advantages, including simplicity in fabrication, low cost, and reusability. To evaluate their effectiveness, the water evaporation-induced electrical output performance of four different p-HEGs are compared. Among the variants tested, the p-HEG combining wood pulp and polyester fiber exhibits the best output performance. At room temperature, this particular p-HEG generates a short-circuit current and open-circuit voltage of ≈0.4 µA and 0.3 V, respectively, thereby demonstrating excellent electrical stability. Furthermore, the electrical current and voltage generated by the p-HEG through water evaporation are able to power an LED light, both individually and in series and parallel connections. This study delves into the potential of electricity harvesting from water evaporation and establishes it as a viable method for renewable energy applications., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Microfluidic paper-based analytical devices (µPADs) are indispensable tools for disease diagnostics. The integration of electronic components into µPADs enables new device functionalities and facilitates the development of complex quantitative assays. Unfortunately, current electrode fabrication methods often hinder capillary flow, considerably restricting µPAD design architectures. Here, laser-induced graphenization is presented as an approach to fabricate porous electrodes embedded into cellulose paper. The resulting electrodes not only have high conductivity and electrochemical activity, but also retain wetting properties for capillary transport. Paper-based electrofluidics, including a lateral flow device for injection analysis of alkaline phosphatase in serum and a vertical flow device for quantitative detection of HPV16 with a CRISPR-based assay are demonstrated. It is expected that this platform will streamline the development of diagnostic devices that combine the operational simplicity of colorimetric lateral flow tests with the added benefits and possibilities offered by electronic signaling., (© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

We propose a printed 384-well microtiter paper-based fluorescent chemosensor array device (384-well microtiter PCAD) to simultaneously categorize and discriminate saccharides and sulfur-containing amino acids for food analysis. The 384-well microtiter PCAD requiring 1 μL/4 mm 2 of each well can allow high-throughput sensing. The device embedded with self-assembled fluorescence chemosensors displayed a fingerprint-like response pattern for targets, the image of which was rapidly captured by a portable digital camera. Indeed, the paper-based chemosensor array system combined with imaging analysis and pattern recognition techniques not only successfully categorized saccharides and sulfur-containing amino acids but also classified mono- and disaccharide groups. Furthermore, the quantitative detectability of the printed device was revealed by a spike and recovery test for fructose and glutathione in a diluted freshly made tomato juice. We believe that the 384-well microtiter PCAD using the imaging analysis system will be a powerful sensor for multi-analytes at several categorized groups in real samples., (© 2022 Wiley-VCH GmbH.)

Nanocellulose has received enormous scientific interest for its abundance, easy manufacturing, biodegradability, and low cost. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs) are ideal candidates to replace plastic coating in the textile and paper industry. Thanks to their capacity to form an interconnected network kept together by hydrogen bonds, nanocelluloses perform an unprecedented strengthening action towards cellulose- and other fiber-based materials. Furthermore, nanocellulose use implies greener application procedures, such as deposition from water. The surface chemistry of nanocellulose plays a pivotal role in influencing the performance of the coating: tailored surface functionalization can introduce several properties, such as gas or grease barrier, hydrophobicity, antibacterial and anti-UV behavior. This review summarizes recent achievements in the use of nanocellulose for paper and textile coating, evidencing critical aspects of coating performances related to deposition technique, nanocellulose morphology, and surface functionalization. Furthermore, beyond focusing on the aspects strictly related to large-scale coating applications for paper and textile industries, this review includes recent achievements in the use of nanocellulose coating for the safeguarding of Cultural Heritage, an extremely noble and interesting emerging application of nanocellulose, focusing on consolidation of historical paper and archaeological textile. Finally, nanocellulose use in electronic devices as an electrode modifier is highlighted., (© 2022 The Authors. ChemPlusChem published by Wiley-VCH GmbH.)

Although paperless technologies are becoming ubiquitous, paper and paper-based materials remain one of the most widely used resources, predicted to exceed an annual total of 460 million metric tons by 2030. Given the environmental challenges, deleterious impact on natural resources, and waste associated with conventional wood-based paper manufacturing, developing more sustainable strategies to source, produce, and recycle paper from natural materials is essential. Here, the development and production of reusable and recyclable paper are reported. This approach offers a pathway for easily producing natural pollen grains via ecofriendly, economical, scalable, and low-energy fabrication routes. It is demonstrated that the pollen-based paper exhibits high-quality printability, readability, and erasability, enabling its reuse. Based on the pH-responsive morphological responses of engineered pollen materials, a method for hygro stable printing and on-demand unprinting is presented. The reusability of the pollen paper renders it more advantageous than conventional single-print wood-based paper. This study thus provides possible pathways to utilize non-allergenic pollen, which is renewable and naturally abundant, as a sustainable source of reusable paper. While this work primarily deals with paper, the methods described here can be extended to produce other products such as cartons and containers for the storage and transport of liquid and solid materials., (© 2022 Wiley-VCH GmbH.)

Accurate quantification of disease-signature microRNAs (miRNAs) in biomedical samples is in high demand for clinical diagnosis but still challenging because of the low abundance of miRNAs and complicating interferences in the milieus. Here, we report a multi-amplification strategy based on paper-spray mass spectrometry (PS MS) for the analysis of miRNAs in blood. A toehold-mediated DNA-strand-displacement reaction (TSD) is employed to amplify the signal chain and to ensure the specificity. The signal chain is then cleaved by UV light to release signal molecules for detection. Moreover, the paper spray method can efficiently filter out interfering substances in the blood and further enhance the sensitivity of detection. This concept is successfully demonstrated in the prototypical detection of the cancer biomarker miRNA-141 in blood and serum. The proposed TSD-PS MS approach provides an efficient method for the sensitive detection of oligonucleotides at low concentration in complicated milieus., (© 2021 Wiley-VCH GmbH.)

Strongly electric fish use gradients of ions within their bodies to generate stunning external electrical discharges; the most powerful of these organisms, the Atlantic torpedo ray, can produce pulses of over 1 kW from its electric organs. Despite extensive study of this phenomenon in nature, the development of artificial power generation schemes based on ion gradients for portable, wearable, or implantable human use has remained out of reach. Previously, an artificial electric organ inspired by the electric eel demonstrated that electricity generated from ion gradients within stacked hydrogels can exceed 100 V. The current of this power source, however, was too low to power standard electronics. Here, an artificial electric organ inspired by the unique morphologies of torpedo rays for maximal current output is introduced. This power source uses a hybrid material of hydrogel-infused paper to create, organize, and reconfigure stacks of thin, arbitrarily large gel films in series and in parallel. The resulting increase in electrical power by almost two orders of magnitude compared to the original eel-inspired design makes it possible to power electronic devices and establishes that biology's mechanism of generating significant electrical power can now be realized from benign and soft materials in a portable size., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

We report a paper-based chemosensor array device (PCSAD) for the quantitative detection of oxyanions including the herbicide glyphosate (GlyP) in aqueous media. The mechanism of the oxyanion detection relies on a coordination-binding-based sensor array. In this study, the competitive coordination binding among Zn 2+ , four catechol dyes, and seven oxyanions caused noticeable colour changes. The colour changes were employed for qualitative and quantitative analyses using an in-house automated image-processing algorithm with pattern recognition for digital images. A linear discrimination analysis discerned similarly structured oxyanions with 100 % accuracy. The regression analysis allowed the accurate quantification of GlyP in the herbicide products with a limit of detection of 16 mg/L, which is lower than the health advisory value for children (20 mg/L) stipulated by the environmental protection agency (EPA). PCSAD is a powerful sensor device for the on-site quantification of aqueous anions for environmental assessment., (© 2021 Wiley-VCH GmbH.)

Silver nanoparticles (AgNPs) are in situ synthesized for the first time on microfibrillated silk (MFS) exfoliated from domesticated Philosamia cynthia ricini (eri) and Bombyx mori (mulberry) silkworm silk fibers. The process is rapid (hours time), does not rely on harmful chemicals, and produces robust and flexible AgNPs coated MFS (MFS-AgNPs) protein papers with excellent handling properties. None of these can be achieved by approaches used in the past to fabricate AgNPs silk systems. MFS bonds the AgNPs strongly, providing good support and stabilization for the NPs, leading to strong wash fastness. The mechanical properties of the MFS-AgNPs papers largely do not change compared to the MFS papers without nanoparticles, except for some higher concentration of AgNPs in the case of mulberry silk. The improved tensile properties of eri silk papers with or without AgNPs compared to mulberry silk papers can be attributed to the higher degree of fibrillation achieved in eri silk and its inherent higher ductility. MFS-AgNPs from eri silk also exhibit strong antibacterial activity. This study provides the basis for the development of smart protein papers based on silk fiber and functional nanomaterials., (© 2020 Wiley-VCH GmbH.)

Electrochemical aptamer-based (E-AB) sensors offer a powerful and general means for analyte detection in complex samples for various applications. Paper-based E-AB sensors could enable portable, low-cost, and rapid detection of a broad range of targets, but it has proven challenging to fabricate suitable three-electrode systems on paper. Here, we demonstrate a simple, economic, and environmentally friendly strategy for fabricating aptamer-modified paper electrochemical devices (PEDs) via ambient vacuum filtration. The material, shape, size, and thickness of the three-electrode PED system can be fully customized. We developed aptamer-modified PEDs that enable sensitive and specific detection of small molecules in minimally processed biosamples. The sensitivity and stability of the PEDs are comparable to E-AB sensors based on commercial gold electrodes. We believe our strategy can lead to the development of high performance PEDs for the on-site detection of a variety of analytes., (© 2020 Wiley-VCH GmbH.)

Weighing paper-assisted magnetic ionic liquid headspace single-drop microextraction using microwave distillation followed by gas chromatography-mass spectrometry was successfully developed to determine the essential oil components in lavender. The magnetic ionic liquid 1-octyl-3-methylimidazolium tetrachloroferrate was successfully synthesized and used as the optimal extraction solvent. An aliquot of 9 μL of magnetic ionic liquid could be stably suspended on the weighing paper for long time extraction. The increase of the extractant volume resulted in a significantly enhanced in extracting efficiency of the weighing paper-assisted magnetic ionic liquid headspace single-drop microextraction than traditional headspace single-drop microextraction method. In this experiment, the optimal conditions were 1-octyl-3-methylimidazolium tetrachloroferrate as the extraction solvent, extraction time of 12 min, microwave power of 600 W, cyclohexane as back-extractant and sample amount of 30 mg. The developed method was successfully applied to analyze 16 lavender samples from three different harvest years. A total of 39 compounds in lavender were identified and the principal component analysis provided a clear separation between those lavender samples harvested in different years. The results indicated that the proposed weighing paper-assisted magnetic ionic liquid headspace single-drop microextraction is a novel, fast, simple and sensitive microextration technique for the determination of the essential oil components in lavender., (© 2020 Wiley-VCH GmbH.)

Bladder cancer is the fourth most common cancer in men, and it is becoming a prevalent malignancy. Most of the regular clinical examinations are prompt evaluations with cystoscopy, renal function testing, which require high-precision instrument, well-trained operators, and high cost. In this study, a microfluidic paper-based analytical device (μPAD) was fabricated to detect nuclear matrix protein 22 (NMP22) and bladder cancer antigen (BTA) from the urine samples. Urine samples were collected from 11 bladder cancer patients and 10 well-beings as experiment and control groups, respectively, to verify the working efficiency of μPAD. A remarkable checkout efficiency of up to 90.91% was found from the results. Meanwhile, this method is feasible for home-based self-detection from urine samples within 10 min for the total process, which provides a new way for quick, economical, and convenient tumor diagnosis, prognosis evaluation, and drug response., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report a microfluidic paper based analytical device implementing ion concentration polarization (ICP) for rapid pre-concentration of Escherichia coli in water. The fabricated device consists of a paper channel with a Nafion ® membrane and in-built micro wire electrodes to supply electric voltage to induce the ICP effect. E. coli cells were stained with SYTO 9 and fluorescence was used as a sensing method. The device achieved high concentration factor up to 2 × 10 5 within minutes. The effect of total ion concentration, on ICP and fluorescence intensity was studied. The reported device and method are suitable and effective for detection of E. coli during ballast water quality monitoring, coastal water quality monitoring where high salinity water is present., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Protein biomarkers often exist as degradation fragments in biological samples, and affinity agents derived using a purified protein may not recognize them, limiting their value for clinical diagnosis. Herein, we present a method to overcome this issue, by selecting aptamers against a degraded form of the toxin B protein, which is a marker for diagnosing toxigenic Clostridium difficile infections. This approach has led to isolation of a DNA aptamer that recognizes degraded toxin B, fresh toxin B, and toxin B spiked into human stool samples. DNA aptamers selected using intact recombinant toxin B failed to recognize degraded toxin B, which is the form present in stored stool samples. Using this new aptamer, we produced a simple paper-based analytical device for colorimetric detection of toxin B in stool samples, or in the NAP1 strain of Clostridium difficile. The combined aptamer-selection and paper-sensing strategy can expand the practical utility of DNA aptamers in clinical diagnosis., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Diffusion of colored dye on water saturated paper substrates has been traditionally exploited with great skill by renowned water color artists. The same physics finds more recent practical applications in paper-based diagnostic devices deploying chemicals that react with a bodily fluid yielding colorimetric signals for disease detection. During spontaneous imbibition through the tortuous pathways of a porous electrolyte saturated paper matrix, a dye molecule undergoes diffusion in a complex network of pores. The advancing front forms a strongly correlated interface that propagates diffusively but with an enhanced effective diffusivity. We measure this effective diffusivity and show that it is several orders of magnitude greater than the free solution diffusivity and has a significant dependence on the solution pH and salt concentration in the background electrolyte. We attribute this to electrically mediated interfacial interactions between the ionic species in the liquid dye and spontaneous surface charges developed at porous interfaces, and introduce a simple theory to explain this phenomenon., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Enhancing the sensitivity of colorimetric detection in paper-devices is a quintessential step in achieving frugal diagnosis. Here, we demonstrate an effective way of improving the detection sensitivity of paper-based devices, as mediated by electro-kinetic mechanisms. By directly employing blood plasma, we investigate the electro-kinetic clustering of glucose, a neutral molecule in paper devices. Under the influence of uniform electric field, dispersed glucose gets accumulated in the paper strips. Due to the combination of EOF and electrophoretic migration, we achieve twofold increase in the colour intensity for both normal and diabetic samples. This approach is robust and possesses better sensitivity than conventional colorimetric assays and can be easily extended to other body fluid based diagnosis. These results may turn out to be of profound importance in improving the quality of pathological diagnosis in low-cost paper-based point-of-care devices deployed in resource-limited settings., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A complete mathematical model for electromigration in paper-based analytical devices is derived, based on differential equations describing the motion of fluids by pressure sources and EOF, the transport of charged chemical species, and the electric potential distribution. The porous medium created by the cellulose fibers is considered like a network of tortuous capillaries and represented by macroscopic parameters following an effective medium approach. The equations are obtained starting from their open-channel counterparts, applying scaling laws and, where necessary, including additional terms. With this approach, effective parameters are derived, describing diffusion, mobility, and conductivity for porous media. While the foundations of these phenomena can be found in previous reports, here, all the contributions are analyzed systematically and provided in a comprehensive way. Moreover, a novel electrophoretically driven dispersive transport mechanism in porous materials is proposed. Results of the numerical implementation of the mathematical model are compared with experimental data, showing good agreement and supporting the validity of the proposed model. Finally, the model succeeds in simulating a challenging case of free-flow electrophoresis in paper, involving capillary flow and electrophoretic transport developed in a 2D geometry., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Microfluidic paper-based analytical devices (μPADs) allow user-friendly and portable chemical determinations, although they provide limited applicability due to insufficient sensitivity. Several approaches have been proposed to address poor sensitivity in μPADs, but they frequently require bulky equipment for power and/or read-outs. Universal serial buses (USB) are an attractive alternative to less portable power sources and are currently available in many common electronic devices. Here, USB-powered μPADs (USB μPADs) are proposed as a fusion of both technologies to improve performance without adding instrumental complexity. Two ITP USB μPADs were developed, both powered by a 5 V potential provided through standard USB ports. The first device was fabricated using the origami approach. Its operation was analyzed experimentally and numerically, yielding a two-order-of-magnitude sample focusing in 15 min. The second ITP USB μPAD is a novel design, which was numerically prototyped with the aim of handling larger sample volumes. The reservoirs were moved away from the ITP channel and capillary action was used to drive the sample and electrolytes to the separation zone, predicting 25-fold sample focusing in 10 min. USB μPADs are expected to be adopted by minimally-trained personnel in sensitive areas like resource-limited settings, the point-of-care and in emergencies., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Detection of biomarkers is essential for diagnosis and prognosis of diseases for healthcare teams to provide timely appropriate treatments. Reliable, inexpensive, and sensitive devices are desirable to serve this purpose. Paper-based analytical devices (PADs) have gained enormous attention during the past decade as point-of-care devices for biomarker detection due to their simplicity, portability, and biocompatibility. Importantly, the devices highly comply with the WHO "ASSURED" concept (i.e. Affordable, Sensitive, Specific, User-friendly, Rapid and Robust, Equipment free, and Deliverable to end-users). Thus, PADs could be sustainably alternative tools for biomarker detection, especially in resources-constraint areas where budget, skillful operators, and health infrastructure are limited. First, this review introduces overviews of biomarkers, their detection and brief history of PADs. Second, description of common fabrication and detection techniques in PADs are provided. Then, it highlights recent state of the art technologies and applications of PADs for various biomarker detection published during 2018 to May 2019. Applications for tumor marker, cardiac and coronary heath disease, and metabolic disorder biomarker detection are tabulated and selected examples are described in details. Finally, it discusses the current challenges, advances, and novel applications of PADs. The review would be valuable for healthcare workers using PADs as cost-effective point-of-care devices for biomarker detection and for researchers working on future developments of the devices., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Exosome quantification is important for estimation of informative messengers (e.g., proteins, lipids, RNA, etc.) involving physiological and pathological effects. This work aimed to develop a simple and rapid distance-based paper portable device using exosome-capture vesicles (polydiacetylene conjugated with antiCD81) for exosome quantification in cell cultures. This novel concept relied on distinct aggregation of exosomes and exosome-capture vesicles leading to different solvent migration. Distances of the migration were used as signal readouts, which could be detected by naked eye. PDA-antiCD81 as exosome-capture vesicles were optimized (e.g., size, reaction ratio, and concentration) and the paper designs were investigated (e.g., diameter of sample reservoir and lamination layer) to enhance the solvent stop-flow effects. Finally, exosome screening on three cell culture samples (COLO1, MDA-MB-231, and HuR-KO1 subclone) was demonstrated. The method could linearly measure exosome concentrations in correlation with solvent migration distances in the range of 10 6 -10 10 particles/mL (R 2  > 0.98) from the cell culture samples. The exosome concentration measurements by the developed device were independently assessed by nanoparticle tracking analysis. Results demonstrated no statistically significant difference (p > 0.05) by t-test. This low-cost and rapid device allows a portable platform for exosome quantification without the requirement of expensive equipment and expertise of operation. The developed device could potentially be useful for quantification of other biomarker-related extracellular vesicles., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This paper describes the use of aluminum and zinc as anodic materials for a battery employing nickel (II) oxide (NiO) as cathode. Comparison of both materials resulted in the development of a compact, cost effective, and easy to use primary NiO/Al battery employing an alkaline electrolyte. The system features electrodes composed of powder forms of the active materials on modified paper substrates that are contained in a simple multilayer design utilizing thin laminated plastic materials to provide structure and flexibility to the battery as well as a paper separator. Various concentrations of potassium hydroxide (KOH) electrolyte were examined and maximum performance was observed at 6 M KOH. A maximum current density and power density of 1.94 mA/cm 2 and 1 mW/cm 2 , respectively was achieved. This user-friendly device was able to produce a maximum capacity of 2.33 mAh/g when 2 mA/g was applied. This work demonstrates the viability of a paper-based battery featuring powder electrodes as a possible power source for microelectronic devices., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Perovskite quantum dots (PQDs) are a competitive candidate for next-generation display technologies as a result of their superior photoluminescence, narrow emission, high quantum yield, and color tunability. However, due to poor thermal resistance and instability under high energy radiation, most PQD-based white light-emitting diodes (LEDs) show only modest luminous efficiency of ≈50 lm W -1 and a short lifetime of <100 h. In this study, by incorporating cellulose nanocrystals, a new type of QD film is fabricated: CH 3 NH 3 PbBr 3 PQD paper that features 91% optical absorption, intense green light emission (518 nm), and excellent stability attributed to the complexation effect between the nanocellulose and PQDs. The PQD paper is combined with red K 2 SiF 6 :Mn4 + phosphor and blue GaN LED chips to fabricate a high-performance white LED demonstrating ultrahigh luminous efficiency (124 lm W -1 ), wide color gamut (123% of National Television System Committee), and long operation lifetime (240 h), which paves the way for advanced lighting technology., Competing Interests: The authors declare no conflict of interest., (© 2019 The Authors. Published by WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

Recently, resistance random access memories (RRAMs) have been studied extensively, because the demand for information storage is increasing. However, it remains challenging to obtain a flexible device because the active materials involved need to be nontoxic, nonpolluting, distortion-tolerable, and biodegradable as well adhesive to diverse flexible substrates. In this paper, tannic acid (TA) and an iron ion (Fe III ) coordination complex were employed as the active layer in a sandwich-like (Al/active layer/substrate) device to achieve memory performance. A nontoxic, biocompatible TA-Fe III coordination complex was synthesized by a one-step self-assembly solution method. The retention time of the TA-Fe III memory performance was up to 15 000 s, the yield up to 53 %. Furthermore, the TA-Fe III coordination complex can form a high-quality film and shows stable ternary memory behavior on various flexible substrates, such as polyethylene terephthalate (PET), polyimide (PI), printer paper, and leaf. The device can be degraded by immersing it in vinegar solution. Our work will broaden the application of organic coordination complexes in flexible memory devices with diverse substrates., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this paper, an alkaline nickel oxide hydroxide/zinc (NiOOH/Zn) battery featuring a cellulose matrix separator between electrodes is presented. The metallic electrodes and the paper separator are inserted in a layer-by-layer assembly that provides mechanical stability to the system resulting in a lightweight and easy-to-use device. The battery was optimized for the amount of NiOOH-ink used at the cathode (11.1 mg/cm 2 ) and thickness of the paper membrane separating the electrodes (360 μm). The battery was able to function using a small volume (75 μL) of 1.5 M potassium hydroxide (KOH) producing a maximum voltage, current density, and power density of 1.35 ± 0.05 V, 10.62 ± 0.57 mA/cm², and 0.56 ± 0.01 mW/cm², respectively. The system displayed a maximum current of 23.9 mA and a maximum power of 1.26 mW. Moreover, four batteries connected in series were able to power a small flameless candle for approximately 22 min. This work has potential in fulfilling the demands for short-term and lightweight power supplies., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Efficient and reliable methods for the generation of bioactive papers are of growing interest in relation to point-of-care testing devices that do not require extensive analytical equipment. Herein, we report the immobilization of functional proteins on paper fibers using a modular chemoenzymatic approach. The synthetic strategy relies on a combination of highly efficient spatially controllable photo-triggered cycloaddition followed by site-specific sortase A-catalyzed transamidation. This site-directed and regiospecific method has allowed unidirectional and covalent immobilization of several proteins displaying different functional properties, with ramifications for application in paper-based diagnostics., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Commercially available metal inks are mainly designed for planar substrates (for example, polyethylene terephthalate foils or ceramics), and they contain hydrophobic polymer binders that fill the pores in fabrics when printed, thus resulting in hydrophobic electrodes. Here, a low-cost binder-free method for the metallization of woven and nonwoven fabrics is presented that preserves the 3D structure and hydrophilicity of the substrate. Metals such as Au, Ag, and Pt are grown autocatalytically, using metal salts, inside the fibrous network of fabrics at room temperature in a two-step process, with a water-based silicon particle ink acting as precursor. Using this method, (patterned) metallized fabrics are being enabled to be produced with low electrical resistance (less than 3.5 Ω sq -1 ). In addition to fabrics, the method is also compatible with other 3D hydrophilic substrates such as nitrocellulose membranes. The versatility of this method is demonstrated by producing coil antennas for wireless energy harvesting, Ag-Zn batteries for energy storage, electrochemical biosensors for the detection of DNA/proteins, and as a substrate for optical sensing by surface enhanced Raman spectroscopy. In the future, this method of metallization may pave the way for new classes of high-performance devices using low-cost fabrics., Competing Interests: The authors declare no conflict of interest., (© 2018 The Authors. Published by WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

Paper microfluidics has attracted much attention since its first introduction around one decade ago due to the merits such as low cost, ease of fabrication and operation, portability, and facile integration with other devices. The dominant application for paper microfluidics still lies in point-of-care testing (POCT), which holds great promise to provide diagnostic tools to meet the ASSURED criteria. With micro/nanostructures inside, paper substrates provide a natural 3D scaffold to mimic native cellular microenvironments and create excellent biointerfaces for cell analysis applications, such as long-term 3D cell culture, cell capture/phenotyping, and cell-related biochemical analysis (small molecules, protein DNA, etc.). This review summarizes cell-related applications based on various engineered paper microdevices and provides some perspectives for paper microfluidics-based cell analysis., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this paper we describe the fabrication of novel 3D microfluidic paper-based analytical devices (3D-μPADs) and a 3D microfluidic thread/paper-based analytical device (3D-μTPAD) to detect glucose and BSA through colorimetric assays. The 3D-μPAD and 3D-μTPAD consisted of three (wax, heat pressed wax-printed paper, single-sided tape) and four (hole-punched single-sided tape, blank chromatography circles, heat-pressed wax-printed paper, hole-punched single-sided tape containing trifurcated thread) layers, respectively. The saturation curves for each assay were generated for all platforms. For the glucose assay, a solution of glucose oxidase (GOx), horseradish peroxidase, and potassium iodide was flowed through each platform and, upon contact with glucose, generated a yellow-brown color indicative of the oxidation of iodide to iodine. For the protein assay, BSA was flowed through each device and, upon contact with citrate buffer and tetrabromophenol blue, resulted in a color change from yellow to blue. The devices were dried, scanned, and analyzed yielding a correlation between either yellow intensity and glucose concentration or cyan intensity and BSA concentration. A similar glucose assay, using unknown concentrations of glucose in artificial urine, was conducted and, when compared to the saturation curve, showed good correlation between the theoretical and actual concentrations (percent differences <10%). The development of 3D-μPADs and 3D-μTPADs can further facilitate the use of these platforms for colorimetric bioassays., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Over the past several years, a new surge of interest in paper electronics has arisen due to the numerous merits of simple micro/nanostructured substrates. Herein, the latest advances and principal issues in the design and fabrication of paper-based flexible electronics are highlighted. Following an introduction of the fascinating properties of paper matrixes, the construction of paper substrates from diverse functional materials for flexible electronics and their underlying principles are described. Then, notable progress related to the development of versatile electronic devices is discussed. Finally, future opportunities and the remaining challenges are examined. It is envisioned that more design concepts, working principles, and advanced papermaking techniques will be developed in the near future for the advanced functionalization of paper, paving the way for the mass production and commercial applications of flexible paper-based electronic devices., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This work reports on fully integrated "sample-in-signal-out" microfluidic paper-based analytical devices (μPADs) relying on bioluminescence resonance energy transfer (BRET) switches for analyte recognition and colorimetric signal generation. The devices use BRET-based antibody sensing proteins integrated into vertically assembled layers of functionalized paper, and their design enables sample volume-independent and fully reagent-free operation, including on-device blood plasma separation. User operation is limited to the application of a single drop (20-30 μL) of sample (serum, whole blood) and the acquisition of a photograph 20 min after sample introduction, with no requirement for precise pipetting, liquid handling, or analytical equipment except for a camera. Simultaneous detection of three different antibodies (anti-HIV1, anti-HA, and anti-DEN1) in whole blood was achieved. Given its simplicity, this type of device is ideally suited for user-friendly point-of-care testing in low-resource environments., (© 2018 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Paper is emerging as a promising flexible, high surface-area substrate for various new applications such as printed electronics, energy storage, and paper-based diagnostics. Many applications, however, require paper that reaches metallic conductivity levels, ideally at low cost. Here, an aqueous electroless copper-plating method is presented, which forms a conducting thin film of fused copper nanoparticles on the surface of the cellulose fibers. This paper can be used as a current collector for anodes of lithium-ion batteries. Owing to the porous structure and the large surface area of cellulose fibers, the copper-plated paper-based half-cell of the lithium-ion battery exhibits excellent rate performance and cycling stability, and even outperforms commercially available planar copper foil-based anode at ultra-high charge/discharge rates of 100 C and 200 C. This mechanically robust metallic-paper composite has promising applications as the current collector for light-weight, flexible, and foldable paper-based 3D Li-ion battery anodes., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Paper spray ionization, one of the ambient mass spectrometry technologies, has been developed to characterize the content of drugs in various complex matrixes including urine, whole blood, dissolution solutions, and so on. An isotopically labeled compound as internal standard is often used in quantitative paper spray ionization experiments. But high cost and difficult to access impede the application of this type of internal standards. Application of non-isotopically labeled compounds as internal standards will make this technology more prevalent. In this paper, we explored the application of finasteride impurity as the internal standard in paper spray ionization-mass spectrometry to measure the dissolution content of finasteride tablets. The new method was optimized and the results were compared to those from high-performance liquid chromatography. The whole analysis time was several minutes and limit of detection for finasteride was around 4.8 ng/mL. The results from paper spray ionization-mass spectrometry were similar to those from high-performance liquid chromatography. Combination of paper spray ionization-mass spectrometry and non-isotopically labeled internal standard renders a new method to analyze drug dissolution content with high specificity, low limit of detection, and simple sample preparation within short time period., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Micrometer-sized functional nucleic acid (FNA) superstructures (denoted as 3D DNA) were examined as a unique class of biorecognition elements to produce highly functional bioactive paper surfaces. 3D DNA containing repeating sequences of either a DNA aptamer or DNAzyme was created from long-chain products of rolling circle amplification followed by salt aging. The resulting 3D DNA retained its original spherical shape upon inkjet printing and adhered strongly to the paper surface via physisorption. 3D DNA paper sensors showed resistance to degradation by nucleases, suppressed nonspecific protein adsorption, and provided a much higher surface density of functional DNA relative to monomeric FNAs, making such species ideally suited for development of paper-based biosensors., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A potentially universal approach is presented for enzyme attachment to cellulose that significantly enhances enzyme stability while retaining high activity, and involves no chemical functionalization of cellulose. Bovine serum albumin (BSA) was interlocked in cellulose to form a protein-friendly surface (named BSA-Paper), while also providing COOH and NH 2 groups for subsequent attachment of enzymes. The desired enzyme is then mixed with additional BSA and interlocked on BSA-Paper. The second BSA layer dilutes and crosslinks the enzyme for improved stability. Laccase was tested as a model enzyme for interlocking on BSA-Paper, and was found to retain over 100 % activity and was 240 times more stable at 25 °C (half life=180 d) than laccase. This new approach was also tested with a few other enzymes with encouraging results, thus providing a potentially universal method for stabilization of enzymes on cellulose with retention of high activities., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Isoelectric focusing plays a critical role in the analysis of complex protein samples. Conventionally, isoelectric focusing is implemented with carrier ampholytes in capillary or immobilized pH gradient gel. In this study, we successfully exhibited a carrier ampholyte-free isoelectric focusing on paper-based analytical device. Proof of the concept was visually demonstrated with color model proteins. Experimental results showed that not only a pH gradient was well established along the open paper fluidic channel as confirmed by pH indicator strip, the pH gradient range could also be tuned by the catholyte or anolyte. Furthermore, the isoelectric focusing fractions from the paper channel can be directly cut and recovered into solutions for post analysis with sodium dodecyl sulfate-polyacrylamide gel electrophoresis and matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry. This paper-based isoelectric focusing method is fast, cheap, simple and easy to operate, and could potentially be used as a cost-effective protein sample clean-up method for target protein analysis with mass spectrometry., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report a paper-based aptasensor platform that uses two reaction zones and a connecting bridge along with printed multifunctional bio/nano materials to achieve molecular recognition and signal amplification. Upon addition of analyte to the first zone, a fluorescently labelled DNA or RNA aptamer is desorbed from printed graphene oxide, rapidly producing an initial fluorescence signal. The released aptamer then flows to the second zone where it reacts with printed reagents to initiate rolling circle amplification, generating DNA amplicons containing a peroxidase-mimicking DNAzyme, which produces a colorimetric readout that can be read in an equipment-free manner or with a smartphone. The sensor was demonstrated using an RNA aptamer for adenosine triphosphate (a bacterial marker) and a DNA aptamer for glutamate dehydrogenase (Clostridium difficile marker) with excellent sensitivity and specificity. These targets could be detected in spiked serum or feacal samples, demonstrating the potential for testing clinical samples., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This paper describes enzyme-linked immunosorbent assays (ELISAs) utilizing microfluidic thread/paper-based analytical devices (μTPAD), microfluidic fabric-based analytical devices (μFAD), and microfluidic thread-based analytical devices (μTAD). Here, the quantitative detection of biotinylated goat anti-mouse IgG (system one) and rabbit IgG (system two) antibodies via colorimetric analysis is detailed. In both systems, antibody is spotted on the detection site and subjected to a series of washes, addition of streptavidin-alkaline phosphatase (Strep-ALP) (system 1) or alkaline phosphatase (ALP)-conjugated secondary antibody (system 2), and colorimetric substrate. The devices are scanned and analyzed yielding a correlation between inverse yellow (or purple) intensity. For system one, a linear range of detection at low concentrations of streptavidin-alkaline phosphatase (Strep-ALP) was observed befire the enzyme reached a V max . At higher concentrations of Strep-ALP, saturation is achieved for both the μTPAD and μFAD devices. For system two, the IC 50 values obtained for the non-trifurcated and trifurcated μTADs were determined to be 180.2 fmol/zone and 133.8 fmol/zone, respectively. The IC 50 value was demonstrated to be 1034 fmol/zone and 208.6 fmol/zone for the μTPADs and μFADs, respectively. For all devices the lowest concentration of Strep-ALP or rabbit IgG used in the assay was 3.75 × 10 -4  mg/mL and 0.7 fmol/zone, respectively. The development of this technology should further facilitate the use of these platforms for ELISA to detect and quantitate antibodies., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A colloidal gold immunochromatographic assay based on a generic monoclonal antibody is developed for the simultaneous detection of benzimidazoles and metabolite residues in milk samples. The monoclonal antibody is prepared using 2-(methoxycarbonylamino)-3H-benzimidazole-5-carboxylic acid as the hapten, and it can recognize 11 types of benzimidazoles simultaneously. The immunochromatographic strip is assembled and labeled using gold nanoparticles. This strip can detect 11 benzimidazoles including albendazole, albendazole s-oxide, albendazole sulfone, fenbendazole, fenbendazole sulfone, flubendazole, mebendazole, parbendazole, oxfendazole, oxibendazole, and carbendazim within 15 min in milk samples. Results are obtained visually with the naked eye, and the cutoff values and the visual limit of detection values for these benzimidazoles are 25, 6.25, 12.5, 12.5, 50, 25, 50, 50, 50, 6.25, and 25 ng mL -1 , and 6.25, 3.125, 3.125, 1.56, 12.5, 6.25, 12.5, 12.5, 6.25, 0.78, and 12.5 ng mL -1 , respectively. Results are also obtained using a hand-held strip scan reader, with calculated limit of detection values for these benzimidazoles of 0.83, 0.77, 1.83, 0.98, 7.67, 3.50, 3.96, 5.71, 0.92, 0.59, and 1.69 ng mL -1 , respectively. In short, the developed paper sensor is a useful tool for rapid and simple screening of residues of benzimidazoles in milk samples., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Paper is used in various applications in biomedical research including diagnostics, separations, and cell cultures. Paper can be conveniently engineered due to its tunable and flexible nature, and is amenable to high-throughput sample preparation and analysis. Paper-based platforms are used to culture primary cells, tumor cells, patient biopsies, stem cells, fibroblasts, osteoblasts, immune cells, bacteria, fungi, and plant cells. These platforms are compatible with standard analytical assays that are typically used to monitor cell behavior. Due to its thickness and porous nature, there are no mass transport limitations to/from the cells in paper scaffolds. It is possible to pattern paper in different scales (micrometer to centimeter), generate modular configurations in 3D, fabricate multicellular and compartmentalized tissue mimetics for clinical applications, and recover cells from the scaffolds for further analysis. 3D paper constructs can provide physiologically relevant tissue models for personalized medicine. Layer-by layer strategies to assemble tissue-like structures from low-cost and biocompatible paper-based materials offer unique opportunities that include understanding fundamental biology, developing disease models, and assembling different tissues for organ-on-paper applications. Paper-based platforms can also be used for origami-inspired tissue engineering. This work provides an overview of recent progress in engineered paper-based biomaterials and platforms to culture and analyze cells., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A general anion-sensing platform is reported based on a portable and cost-effective ion-selective optode and a smartphone detector equipped with a color analysis app. In contrast to traditional anion-selective optodes using a hydrophobic polymer and/or plasticizer to dissolve hydrophobic sensing elements, the new optode relies on hydrophilic cellulose paper. The anion ionophore and a lipophilic pH indicator are inkjet-printed and adsorbed on paper and form a "dry" hydrophobic sensing layer. Porous cellulose sheets also allow the sensing site to be modified with dried buffer that prevents any sample pH dependence of the observed color change. A highly selective fluoride optode using an Al III -porphyrin ionophore is examined as an initial example of this new anion sensing platform for measurements of fluoride levels in drinking water samples. Apart from Lewis acid-base recognition, hydrogen bonding recognition is also compatible with this sensing platform., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Continuous-flow nanocatalysis based on metal nanoparticle catalyst-anchored flow reactors has recently provided an excellent platform for effective chemical manufacturing. However, there has been limited progress in porous structure design and recycling systems for metal nanoparticle-anchored flow reactors to create more efficient and sustainable catalytic processes. In this study, traditional paper is used for a highly efficient, recyclable, and even renewable flow reactor by tailoring the ultrastructures of wood pulp. The "paper reactor" offers hierarchically interconnected micro- and nanoscale pores, which can act as convective-flow and rapid-diffusion channels, respectively, for efficient access of reactants to metal nanoparticle catalysts. In continuous-flow, aqueous, room-temperature catalytic reduction of 4-nitrophenol to 4-aminophenol, a gold nanoparticle (AuNP)-anchored paper reactor with hierarchical micro/nanopores provided higher reaction efficiency than state-of-the-art AuNP-anchored flow reactors. Inspired by traditional paper materials, successful recycling and renewal of AuNP-anchored paper reactors were also demonstrated while high reaction efficiency was maintained., (© 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Antimicrobial resistance (AMR), the ability of a bacterial species to resist the action of an antimicrobial drug, has been on the rise due to the widespread use of antimicrobial agents. Per the World Health Organization, AMR has an estimated annual cost of USD 34 billion in the US and is predicted to be the number one cause of death worldwide by 2050. One way AMR bacteria can spread, and by which individuals can contract AMR infections, is through contaminated water. Monitoring AMR bacteria in the environment currently requires that samples be transported to a central laboratory for slow and labor intensive tests. We have developed an inexpensive assay using paper-based analytical devices (PADs) that can test for the presence of β-lactamase-mediated resistance. To demonstrate viability, the PAD was used to detect β-lactam resistance in wastewater and sewage and identified resistance in individual bacterial species isolated from environmental water sources., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Paper-based materials are emerging as a new category of advanced electrodes for flexible energy storage devices, including supercapacitors, Li-ion batteries, Li-S batteries, Li-oxygen batteries. This review summarizes recent advances in the synthesis of paper-based electrodes, including paper-supported electrodes and paper-like electrodes. Their structural features, electrochemical performances and implementation as electrodes for flexible energy storage devices including supercapacitors and batteries are highlighted and compared. Finally, we also discuss the challenges and opportunity of paper-based electrodes and energy storage devices.

Neurotransmitters play key roles in cell-to-cell communication. These chemical messengers are involved in many functional processes, including growth, reproduction, memory, and behavior. In this communication, we describe a novel microfluidic paper-based analytical device (μPAD) to detect acetylcholinesterase (AChE) activity and inhibitor screening through a colorimetric analysis. The μPAD is easily fabricated via a wax printing process whereby wax is deposited onto the surface of chromatographic paper, and heated to create a hydrophobic barrier. Separate solutions of 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB) and samples containing AChE and acetylthiocholine iodide (ATC) (or cysteine, Cys), respectively, are directly spotted onto the μPAD. DTNB and AChE/ATC (or Cys) flow towards each other where a reaction occurs to form the yellow colored 2-nitro-5-thiobenzoic acid anion (TNB 2- ). The device is dried, scanned, and analyzed yielding a linear range of average inverse yellow intensities versus substrate concentration. An IC 50 value (0.045 nM) with a known inhibitor, neostigmine bromide (NB), is obtained on the device. μPADs are low cost and easy to fabricate and have great potential to quantify neurotransmitter activity., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)