Search

The direct-global-matrix coupled-mode model (DGMCM) for sound propagation in range-dependent waveguides was recently developed by Luo et al. [A numerically stable coupled-mode formulation for acoustic propagation in range-dependent waveguides, Sci. China G: Phys. Mech. Astron. 55 (2012) 572-588]. A brief review of the formulation and characteristics of this model is given. This paper extends this model to deal with realistic problems involving an inhomogeneous water column and a penetrable sloping bottom. To this end, the normal mode model KRAKEN is adopted to provide local modal solutions and their associated coupling matrices. As a result, the extended DGMCM model is capable of providing full two-way solutions to two-dimensional (2D) realistic problems with a depth- and range-dependent sound speed profile as well as a penetrable sloping bottom. To validate this model, it is first applied to a benchmark problem of sound propagation in a plane-parallel waveguide with a depth- and range-dependent sound speed profile, and then it is applied to a problem involving both an inhomogeneous water column and a sloping bottom. Comparisons with the analytical solution proposed by DeSanto and with the numerical model COUPLE are also provided, which show that the extended DGMCM model is accurate and efficient and hence can serve as a benchmark for realistic problems of sound propagation in an inhomogeneous waveguide. [ABSTRACT FROM AUTHOR]

The growth of precipitates in a solution system is studied using the asymptotic method, taking into account the cross diffusion between solutes. The resulting asymptotic solution for the dynamic model of the precipitate growing in the solution reveals that the concentration distribution is significantly changed by the cross diffusion between solutes and the growth of precipitate depends not only on the self diffusion of solutes, but also on the diffusive interaction between solutes. The attractive diffusive interaction between solutes in the solution enhances the solute diffusion and facilitates the growth of precipitate, whereas the repulsive diffusive interaction between solutes depresses the solute diffusion and inhibits the growth of precipitate. [ABSTRACT FROM AUTHOR]

Milling processing is an important way to obtain wood-polyethylene composite (WPC) end products. In order to improve the processing efficiency and surface quality of WPC and meet the practical application requirements, this paper focussed on morphology and roughness of the WPC-milled surface and studied surface quality changes under different cutting parameters and milling methods through multi-parameters milling experiments. The milling surface morphology and roughness of WPC were analyzed and measured during cut-in, cutting and cut-out sections. It also revealed the affect rule of different cutting parameters and milling methods on milled surface morphology and roughness. The results show that the milling surface roughness of WPC products with wood powder content of 70% is significantly larger than the one whose wood powder content is 60%, and defects such as holes are also relatively more. Finally, a surface roughness prediction model was established based on the mathematical regression method and its multi-factor simulation was carried out. A comparative analysis of predictive and experimental values was performed to verify the reliability of the model. It could also provide theoretical guidance and technical guarantee for high processing quality of WPC milling and cutting. [ABSTRACT FROM AUTHOR]