Search

As one of the workload characteristics, the anomaly behaviors in real workload have been recognized as a critical requirement for file system design. In this paper, a set of traces collected from typically realistic file system have been analyzed. The correlation study of I/O request inter-arrival times shows that it is necessary to examine the self-similarity in file system workload. Then the phenomenon of self-similarity which had been initially observed in network and disk I/O workload has also been visually and statistically observed in file system workload. In addition, we implement an I/O series generator in which the inputs are the measured properties of the available trace data. Experimental results show that this model can accurately emulate the complex access arrival behaviors of real file systems, particularly the heavy-tail characteristics. [ABSTRACT FROM AUTHOR]

In this study, in order to obtain the optimal fabricating condition, the influences of heating temperature and time on the fabrication of zinc oxide (ZnO) nanowires are clarified. During this process, the synthesis and scanning electron microscope (SEM) images of ZnO nanostructures, produced by direct heating of metallic zinc, are presented. Besides, the SEM images and X-ray diffraction (XRD) patterns of products under different conditions are compared to analyze the surface morphology and composition of products. In the final observation, the best diameters of ZnO nanowires are achieved as 60–70 nm, which can be successfully applied as a substrate in Raman measurement. The optimal temperature is 450∘C, as well as the optimal time is 40–50 min. [ABSTRACT FROM AUTHOR]

In this paper, ZnO nanobelts have been partially high-quality synthesized employing diverse reactant mass ratios between zinc acetate [Zn(AC)2] and polyvinyl alcohol (PVA) without any catalyst. The maximum temperature required for the whole reaction process is no more than 650C. The morphologies of ZnO nanomaterials fabricated from distinct reactant concentrations have been systematically investigated by means of field-emission scanning electron microscopy (FESEM). X-ray diffraction (XRD) analysis identifies that ZnO nanobelts exhibit a typical wurtzite structure. Through fluorescence spectrometer, the photoluminescence (PL) spectra generated by ZnO nanomaterials corresponding to different reactant concentrations have disparate peak intensities and luminescence wavelengths. This phenomenon indicates that novel-synthesized ZnO nanomaterial shows great potential in changing the optical properties of light-emitting devices. In addition, synthetic ZnO nanobelts exhibit excellent UV emission capability. [ABSTRACT FROM AUTHOR]

In this study, ZnO nanobelts were successfully fabricated by flash synthesis without any expensive catalyst at a relatively low temperature (600C). The whole process took just 30 min. Introducing a solution tank containing a mixture of polyvinyl alcohol (PVA) and Zn(AC)2, was an auxiliary process to elevate the quality of the products. The morphology of the ZnO nanobelts was systematically investigated by means of field emission scanning electron microscopy (FRSEM) and high-resolution transmission electron microscopy (HRTEM). The products had an average width of 200nm and a length of more than 10. X-ray diffraction analysis indicated that the ZnO nanobelts had a typical wurtzite structure. Finally, the growth mechanism of the unique morphology of the ZnO nanobelts is discussed. An assembly-line production method is also proposed based on the results. [ABSTRACT FROM AUTHOR]