Search

Adaptive optics systems often work in a closed-loop configuration due to the hysteretic and nonlinearity properties of conventional deformable mirrors. Because of the high-precision wavefront generation and nonhysteretic properties of liquid-crystal devices, the open-loop control becomes possible. Open-loop control is a requirement for advanced adaptive optics concepts. We designed an open-loop adaptive optics system with a liquid-crystal-on-silicon wavefront corrector. This system is simple, fast, and can save much more light compared to conventional liquid-crystal-based closed-loop systems. The detailed principle, construction, and operation are discussed. The 500 m horizontal turbulence correction experiment was done using a 250 mm telescope in the laboratory. The whole system can reach a 60 Hz correction frequency. Evaluation of the correction precision was done at closed-loop configuration, which is 0.22 [lambda] ([lambda] = 0.633 [micro]m) in peak to valley. The dynamic image under open-loop correction got the same resolution compared to closed-loop correction. The whole system reached 0.68 arc sec resolution capability at open-loop correction, which is slightly larger than the system's diffraction-limited resolution of 0.65 arc sec. OCIS codes: 230.3720, 010.1080, 220.4830.

To allow angular separation of the beam reflected off a liquid crystal wavefront corrector from the incident beam, it is convenient to introduce a small incident angle. This avoids using a beam splitter and the associated energy losses. The effect of the tilt incidence on the liquid crystal wavefront corrector was investigated in this paper. For a parallel aligned liquid crystal wavefront corrector, a simplified model was established and used to analyze the change of the phase modulation under the tilt incidence. The simulated results showed that the effect of the tilt incidence on the phase modulation can be ignored when the angle of tilt incidence is less than 6[degrees]. The phase modulation related to the incident angle was measured and the changing trend was similar to the calculated results. The effect of the tilt incidence on the diffraction efficiency of the liquid crystal wavefront corrector was also discussed. The simulated results indicated that the reduction of the diffraction efficiency is less than 1% for incidence angles under 3[degrees]. Last, a closed loop correction experiment was done with an incident angle of 1[degrees]. After correction, the averaged peak to valley (PV) and root mean square (RMS) of the wavefront were down to 0.15 [lambda] and 0.03 [lambda], respectively, and a resolvable image was acquired. OCIS codes: 010.1080, 230.3720, 230.6120.

A collimator with a long focal length and large aperture is a very important apparatus for testing large-aperture optical systems. But it suffers from internal air turbulence, which may limit its performance and reduce the testing accuracy. To overcome this problem, an adaptive optics system is introduced to compensate for the turbulence. This system includes a liquid crystal on silicon device as a wavefront corrector and a Shack-Hartmann wavefront sensor. After correction, we can get a plane wavefront with rms of about 0.017[lambda]([lambda] = 0.6328[micro]m) emitted out of a larger than 500 mm diameter aperture. The whole system reaches diffraction-limited resolution. OCIS codes: 220.4840, 010.1080, 230.3720.

A twisted nematic liquid crystal wavefront corrector (TN-LCWFC) partially modulates the incident polarized light. A blazed grating may be preapplied on the TN-LCWFC to filter the unmodulated light for the purpose of stable adaptive correction. However, for broadband light, the dispersion of the blazed grating affects the image resolution. An achromatic method is presented to eliminate the dispersion of the blazed grating. Based on a prism model, we analyze the achromatic principle. An achromatic system with a conjugated blazed grating and an achromatic lens is given to eliminate the dispersion. An experiment was done with two transmitted blazed gratings so as to validate our method. Finally, a liquid crystal spatial light modulator was used as a conjugated grating to eliminate the dispersion of the blazed grating in an adaptive optics system. The results showed that the dispersion was partially compensated, and a resolvable image was achieved with a 600-700 nm wave band. OCIS codes: 010.1080, 230.3720, 220.1000, 230.6120.