Search

This paper deals with the imaging of a moving target using a multifrequency and multistatic radar consisting in one receiver and several narrowband transmitters. Considering two hypotheses about the studied target, we derive two multistatic inverse synthetic aperture radar processors: the first one, which models the target as a set of isotropic points, performs a coherent sum of bistatic images; the second one, which models the target as a set of nonisotropic points, performs an incoherent sum of bistatic images. Numerical simulations are done, which demonstrate the efficiency of the second processor. We also apply both processors to a multistatic passive radar scenario for which the transmitters are FM stations located in a realistic configuration. We study the system performance in terms of resolution and sidelobe levels as a function of the number of transmitters and of the integration time. Both processors are applied to similar complex targets for which the scattered fields are simulated by a numerical electromagnetic code. The resulting multistatic radar images show interesting characteristics that might be used by classification algorithms in future work.

In this paper, the problem of estimating complex-valued proportional covariance matrices is addressed. The obtained estimate generalizes the fixed point estimate to scaled packets of data, and is hence called the generalized fixed point estimate (GFPE). The statistical properties (bias, consistency, and asymptotical distributions) of the estimate are presented, and verified through simulations. As an example of application, a radar detection problem is considered. The GFPE is used in the well-known adaptive normalized matched filter (ANMF), and the obtained empirical probability of false alarms threshold curve is compared to the theoretical one. The ANMF is also used to compare the GFPE to the fixed point estimate. [ABSTRACT FROM PUBLISHER]

When using multichannel synthetic aperture radar (MSAR) to perform moving target detection, the coherence between the received signals is closely linked to the detection capacities of the system. In airborne MSAR context, because of the platform movement, the antenna patterns, as well as the phase shifts between the channels, evolve in different ways during the integration time. In this paper, these dissimilarities are shown to cause a degradation of coherence, and hence of detection capacities. A method to enhance the coherence is then developed. This method is based on the estimation of the steering vector. It is applied on two sets of real data, and the obtained results validate the method. [ABSTRACT FROM PUBLISHER]

Broadband electromagnetic frequency or time domain sensor techniques present high potential for quantitative water content monitoring in porous media. Prior to in situ application, the impact of the relationship between the broadband electromagnetic properties of the porous material (clay-rock) and the water content on the frequency or time domain sensor response is required. For this purpose, dielectric properties of intact clay rock samples experimental determined in the frequency range from 1 MHz to 10 GHz were used as input data in 3-D numerical frequency domain finite element field calculations to model the one port broadband frequency or time domain transfer function for a three rods based sensor embedded in the clay-rock. The sensor response in terms of the reflection factor was analyzed in time domain with classical travel time analysis in combination with an empirical model according to Topp equation, as well as the theoretical Lichtenecker and Rother model (LRM) to estimate the volumetric water content. The mixture equation considering the appropriate porosity of the investigated material provide a practical and efficient approach for water content estimation based on classical travel time analysis with the onset-method. The inflection method is not recommended for water content estimation in electrical dispersive and absorptive material. Moreover, the results clearly indicate that effects due to coupling of the sensor to the material cannot be neglected. Coupling problems caused by an air gap lead to dramatic effects on water content estimation, even for submillimeter gaps. Thus, the quantitative determination of the in situ water content requires careful sensor installation in order to reach a perfect probe clay rock coupling. [ABSTRACT FROM AUTHOR]